The proliferation of Intelligent Transportation Systems (ITSs) applications, such as Internet access and Infotainment, highlights the requirements for improving the underlying mobility management protocols for Vehicular Ad Hoc Networks (VANETs). Mobility management protocols in VANETs are envisioned to support mobile nodes (MNs), i.e., vehicles, with seamless communications, in which service continuity is guaranteed while vehicles are roaming through different RoadSide Units (RSUs) with heterogeneous wireless technologies. Due to its standardization and widely deployment, IP mobility (also called Mobile IP (MIP)) is the most popular mobility management protocol used for mobile networks including VANETs. In addition, because of the diversity of possible applications, the Internet Engineering Task Force (IETF) issues many MIP's standardizations, such as MIPv6 and NEMO for global mobility, and Proxy MIP (PMIPv6) for localized mobility. However, many challenges have been posed for integrating IP mobility with VANETs, including the vehicle's high speeds, multi-hop communications, scalability, and ef ficiency. From a security perspective, we observe three main challenges: 1) each vehicle's anonymity and location privacy, 2) authenticating vehicles in multi-hop communications, and 3) physical-layer location privacy. In transmitting mobile IPv6 binding update signaling messages, the mobile node's Home Address (HoA) and Care-of Address (CoA) are transmitted as plain-text, hence they can be revealed by other network entities and attackers. The mobile node's HoA and CoA represent its identity and its current location, respectively, therefore revealing an MN's HoA means breaking its anonymity while revealing an MN's CoA means breaking its location privacy. On one hand, some existing anonymity and location privacy schemes require intensive computations, which means they cannot be used in such time-restricted seamless communications. On the other hand, some schemes only achieve seamless communication through low anonymity and location privacy levels. Therefore, the trade-off between the network performance, on one side, and the MN's anonymity and location privacy, on the other side, makes preservation of privacy a challenging issue. In addition, for PMIPv6 to provide IP mobility in an infrastructure-connected multi-hop VANET, an MN uses a relay node (RN) for communicating with its Mobile Access Gateway (MAG). Therefore, a mutual authentication between the MN and RN is required to thwart authentication attacks early in such scenarios. Furthermore, for a NEMO-based VANET infrastructure, which is used in public hotspots installed inside moving vehicles, protecting physical-layer location privacy is a prerequisite for achieving privacy in upper-layers such as the IP-layer. Due to the open nature of the wireless environment, a physical-layer attacker can easily localize users by employing signals transmitted from these users. In this dissertation, we address those security challenges by proposing three security schemes to be employed for different mobility management scenarios in VANETs, namely, the MIPv6, PMIPv6, and Network Mobility (NEMO) protocols. First, for MIPv6 protocol and based on the onion routing and anonymizer, we propose an anonymous and location privacy-preserving scheme (ALPP) that involves two complementary sub-schemes: anonymous home binding update (AHBU) and anonymous return routability (ARR). In addition, anonymous mutual authentication and key establishment schemes have been proposed, to authenticate a mobile node to its foreign gateway and create a shared key between them. Unlike existing schemes, ALPP alleviates the tradeoff between the networking performance and the achieved privacy level. Combining onion routing and the anonymizer in the ALPP scheme increases the achieved location privacy level, in which no entity in the network except the mobile node itself can identify this node's location. Using the entropy model, we show that ALPP achieves a higher degree of anonymity than that achieved by the mix-based scheme. Compared to existing schemes, the AHBU and ARR sub-schemes achieve smaller computation overheads and thwart both internal and external adversaries. Simulation results demonstrate that our sub-schemes have low control-packets routing delays, and are suitable for seamless communications. Second, for the multi-hop authentication problem in PMIPv6-based VANET, we propose EM3A, a novel mutual authentication scheme that guarantees the authenticity of both MN and RN. EM3A thwarts authentication attacks, including Denial of service (DoS), collusion, impersonation, replay, and man-in-the-middle attacks. EM3A works in conjunction with a proposed scheme for key establishment based on symmetric polynomials, to generate a shared secret key between an MN and an RN. This scheme achieves lower revocation overhead than that achieved by existing symmetric polynomial-based schemes. For a PMIP domain with n points of attachment and a symmetric polynomial of degree t, our scheme achieves t x 2^n-secrecy, whereas the existing symmetric polynomial-based authentication schemes achieve only t-secrecy. Computation and communication overhead analysis as well as simulation results show that EM3A achieves low authentication delay and is suitable for seamless multi-hop IP communications. Furthermore, we present a case study of a multi-hop authentication PMIP (MA-PMIP) implemented in vehicular networks. EM3A represents the multi-hop authentication in MA-PMIP to mutually authenticate the roaming vehicle and its relay vehicle. Compared to other authentication schemes, we show that our MA-PMIP protocol with EM3A achieves 99.6% and 96.8% reductions in authentication delay and communication overhead, respectively. Finally, we consider the physical-layer location privacy attacks in the NEMO-based VANETs scenario, such as would be presented by a public hotspot installed inside a moving vehicle. We modify the obfuscation, i.e., concealment, and power variability ideas and propose a new physical-layer location privacy scheme, the fake point-cluster based scheme, to prevent attackers from localizing users inside NEMO-based VANET hotspots. Involving the fake point and cluster based sub-schemes, the proposed scheme can: 1) confuse the attackers by increasing the estimation errors of their Received Signal Strength (RSSs) measurements, and 2) prevent attackers' monitoring devices from detecting the user's transmitted signals. We show that our scheme not only achieves higher location privacy, but also increases the overall network performance. Employing correctness, accuracy, and certainty as three different metrics, we analytically measure the location privacy achieved by our proposed scheme. In addition, using extensive simulations, we demonstrate that the fake point-cluster based scheme can be practically implemented in high-speed VANETs' scenarios.

The proliferation of Intelligent Transportation Systems (ITSs) applications, such as Internet access and Infotainment, highlights the requirements for improving the underlying mobility management protocols for Vehicular Ad Hoc Networks (VANETs). Mobility management protocols in VANETs are envisioned to support mobile nodes (MNs), i.e., vehicles, with seamless communications, in which service continuity is guaranteed while vehicles are roaming through different RoadSide Units (RSUs) with heterogeneous wireless technologies. Due to its standardization and widely deployment, IP mobility (also called Mobile IP (MIP)) is the most popular mobility management protocol used for mobile networks including VANETs. In addition, because of the diversity of possible applications, the Internet Engineering Task Force (IETF) issues many MIP's standardizations, such as MIPv6 and NEMO for global mobility, and Proxy MIP (PMIPv6) for localized mobility. However, many challenges have been posed for integrating IP mobility with VANETs, including the vehicle's high speeds, multi-hop communications, scalability, and ef ficiency. From a security perspective, we observe three main challenges: 1) each vehicle's anonymity and location privacy, 2) authenticating vehicles in multi-hop communications, and 3) physical-layer location privacy. In transmitting mobile IPv6 binding update signaling messages, the mobile node's Home Address (HoA) and Care-of Address (CoA) are transmitted as plain-text, hence they can be revealed by other network entities and attackers. The mobile node's HoA and CoA represent its identity and its current location, respectively, therefore revealing an MN's HoA means breaking its anonymity while revealing an MN's CoA means breaking its location privacy. On one hand, some existing anonymity and location privacy schemes require intensive computations, which means they cannot be used in such time-restricted seamless communications. On the other hand, some schemes only achieve seamless communication through low anonymity and location privacy levels. Therefore, the trade-off between the network performance, on one side, and the MN's anonymity and location privacy, on the other side, makes preservation of privacy a challenging issue. In addition, for PMIPv6 to provide IP mobility in an infrastructure-connected multi-hop VANET, an MN uses a relay node (RN) for communicating with its Mobile Access Gateway (MAG). Therefore, a mutual authentication between the MN and RN is required to thwart authentication attacks early in such scenarios. Furthermore, for a NEMO-based VANET infrastructure, which is used in public hotspots installed inside moving vehicles, protecting physical-layer location privacy is a prerequisite for achieving privacy in upper-layers such as the IP-layer. Due to the open nature of the wireless environment, a physical-layer attacker can easily localize users by employing signals transmitted from these users. In this dissertation, we address those security challenges by proposing three security schemes to be employed for different mobility management scenarios in VANETs, namely, the MIPv6, PMIPv6, and Network Mobility (NEMO) protocols. First, for MIPv6 protocol and based on the onion routing and anonymizer, we propose an anonymous and location privacy-preserving scheme (ALPP) that involves two complementary sub-schemes: anonymous home binding update (AHBU) and anonymous return routability (ARR). In addition, anonymous mutual authentication and key establishment schemes have been proposed, to authenticate a mobile node to its foreign gateway and create a shared key between them. Unlike existing schemes, ALPP alleviates the tradeoff between the networking performance and the achieved privacy level. Combining onion routing and the anonymizer in the ALPP scheme increases the achieved location privacy level, in which no entity in the network except the mobile node itself can identify this node's location. Using the entropy model, we show that ALPP achieves a higher degree of anonymity than that achieved by the mix-based scheme. Compared to existing schemes, the AHBU and ARR sub-schemes achieve smaller computation overheads and thwart both internal and external adversaries. Simulation results demonstrate that our sub-schemes have low control-packets routing delays, and are suitable for seamless communications. Second, for the multi-hop authentication problem in PMIPv6-based VANET, we propose EM3A, a novel mutual authentication scheme that guarantees the authenticity of both MN and RN. EM3A thwarts authentication attacks, including Denial of service (DoS), collusion, impersonation, replay, and man-in-the-middle attacks. EM3A works in conjunction with a proposed scheme for key establishment based on symmetric polynomials, to generate a shared secret key between an MN and an RN. This scheme achieves lower revocation overhead than that achieved by existing symmetric polynomial-based schemes. For a PMIP domain with n points of attachment and a symmetric polynomial of degree t, our scheme achieves t x 2^n-secrecy, whereas the existing symmetric polynomial-based authentication schemes achieve only t-secrecy. Computation and communication overhead analysis as well as simulation results show that EM3A achieves low authentication delay and is suitable for seamless multi-hop IP communications. Furthermore, we present a case study of a multi-hop authentication PMIP (MA-PMIP) implemented in vehicular networks. EM3A represents the multi-hop authentication in MA-PMIP to mutually authenticate the roaming vehicle and its relay vehicle. Compared to other authentication schemes, we show that our MA-PMIP protocol with EM3A achieves 99.6% and 96.8% reductions in authentication delay and communication overhead, respectively. Finally, we consider the physical-layer location privacy attacks in the NEMO-based VANETs scenario, such as would be presented by a public hotspot installed inside a moving vehicle. We modify the obfuscation, i.e., concealment, and power variability ideas and propose a new physical-layer location privacy scheme, the fake point-cluster based scheme, to prevent attackers from localizing users inside NEMO-based VANET hotspots. Involving the fake point and cluster based sub-schemes, the proposed scheme can: 1) confuse the attackers by increasing the estimation errors of their Received Signal Strength (RSSs) measurements, and 2) prevent attackers' monitoring devices from detecting the user's transmitted signals. We show that our scheme not only achieves higher location privacy, but also increases the overall network performance. Employing correctness, accuracy, and certainty as three different metrics, we analytically measure the location privacy achieved by our proposed scheme. In addition, using extensive simulations, we demonstrate that the fake point-cluster based scheme can be practically implemented in high-speed VANETs' scenarios.

Due to terminal mobility and change of service area, efficient IP mobility support is an important aspect in UMTS networks in order to provide mobile users negligible packet loss rate and low handover latency, and thus some level of guaranteed quality-ofservice (QoS) to support real-time applications. 3G/UMTS has been specified and implemented as an end-to-end mobile communications system. The underlying WCDMA access systems manage radio access handover (layer 1) and provide linklayer mobility (layer 2) in terms of connection setup and resource management. For the UMTS nodes to have seamless connectivity with the Internet, the UMTS core networks need to be able to support continuous and no network service session handover (layer 3 and above). A long IP handover latency results in high packet loss rate and severely degrades its end-to-end transport level performance. Network-layer handover latency has therefore been regarded as one of the fundamental limitations in IP-based UMTS networks. Therefore, it is crucial to provide efficient network-layer mobility management in UMTS/WCDMA networks for seamless end-to-end TCP connection with the global Internet. Mobility of UMTS nodes necessitates extra functionalities such as user location tracking, address registration and handover related mechanisms. The challenge to provide seamless mobility in UMTS requires localised location management and efficient IP handover management. Mobile IPv6 protocol offers a better mobility support as the extended IPv6 features with mobility mechanism are integrated to the mobile nodes. To mitigate the effect of lengthy IP handover latency, two well-known handover reducing mechanisms based on Mobile IPv6 support have been proposed in the literature. They are designed with hierarchical network management and address pre-configuration mechanism. Hierarchical management aims to reduce the network registration time, and fast-handover attempts to minimise the address resolution delay. S-MIP (Seamless Mobile IP) integrates the key benefits of the above IP mobility mechanisms coupled with local retransmission scheme to achieve packet lossless and extremely low handover latency, operating in WLAN environments. In this thesis, we explore the possible Mobile IP solutions and various IP handover optimisation schemes in IPv6 to provide seamless mobility in UMTS with the global Internet. It aims at developing an optimised handover scheme that encompasses the packet lossless and extremely low handover latency scheme in S-MIP, and applying it into the UMTS/WCDMA packet data domain. Therefore, the hybrid UMTS-SMIP architecture is able to meet the requirements of delay sensitive real-time applications requiring strict delay bound, packet lossless and low handover latency performance for end-to-end TCP connection during a UMTS IP-based handover. The overall seamless handover architecture in UMTS facilitates integrated, scalable and flexible global IP handover solution enabling new services, assuring service quality and meeting the user???s expectations in future all-IP UMTS deployment. The viability of the seamless mobility scheme in UMTS is reflected through and validated in our design model, network protocol implementation, and service architecture. We illustrate the performance gained in QoS parameters, as a result of converged UMTS-SMIP framework compared to other Mobile IPv6 variants. The simulation results show such a viable and promising seamless handover scheme in UMTS on IP handover latency reduction on its end-to-end TCP connection.

Due to terminal mobility and change of service area, efficient IP mobility support is an important aspect in UMTS networks in order to provide mobile users negligible packet loss rate and low handover latency, and thus some level of guaranteed quality-ofservice (QoS) to support real-time applications. 3G/UMTS has been specified and implemented as an end-to-end mobile communications system. The underlying WCDMA access systems manage radio access handover (layer 1) and provide linklayer mobility (layer 2) in terms of connection setup and resource management. For the UMTS nodes to have seamless connectivity with the Internet, the UMTS core networks need to be able to support continuous and no network service session handover (layer 3 and above). A long IP handover latency results in high packet loss rate and severely degrades its end-to-end transport level performance. Network-layer handover latency has therefore been regarded as one of the fundamental limitations in IP-based UMTS networks. Therefore, it is crucial to provide efficient network-layer mobility management in UMTS/WCDMA networks for seamless end-to-end TCP connection with the global Internet. Mobility of UMTS nodes necessitates extra functionalities such as user location tracking, address registration and handover related mechanisms. The challenge to provide seamless mobility in UMTS requires localised location management and efficient IP handover management. Mobile IPv6 protocol offers a better mobility support as the extended IPv6 features with mobility mechanism are integrated to the mobile nodes. To mitigate the effect of lengthy IP handover latency, two well-known handover reducing mechanisms based on Mobile IPv6 support have been proposed in the literature. They are designed with hierarchical network management and address pre-configuration mechanism. Hierarchical management aims to reduce the network registration time, and fast-handover attempts to minimise the address resolution delay. S-MIP (Seamless Mobile IP) integrates the key benefits of the above IP mobility mechanisms coupled with local retransmission scheme to achieve packet lossless and extremely low handover latency, operating in WLAN environments. In this thesis, we explore the possible Mobile IP solutions and various IP handover optimisation schemes in IPv6 to provide seamless mobility in UMTS with the global Internet. It aims at developing an optimised handover scheme that encompasses the packet lossless and extremely low handover latency scheme in S-MIP, and applying it into the UMTS/WCDMA packet data domain. Therefore, the hybrid UMTS-SMIP architecture is able to meet the requirements of delay sensitive real-time applications requiring strict delay bound, packet lossless and low handover latency performance for end-to-end TCP connection during a UMTS IP-based handover. The overall seamless handover architecture in UMTS facilitates integrated, scalable and flexible global IP handover solution enabling new services, assuring service quality and meeting the user???s expectations in future all-IP UMTS deployment. The viability of the seamless mobility scheme in UMTS is reflected through and validated in our design model, network protocol implementation, and service architecture. We illustrate the performance gained in QoS parameters, as a result of converged UMTS-SMIP framework compared to other Mobile IPv6 variants. The simulation results show such a viable and promising seamless handover scheme in UMTS on IP handover latency reduction on its end-to-end TCP connection.

Due to terminal mobility and change of service area, efficient IP mobility support is an important aspect in UMTS networks in order to provide mobile users negligible packet loss rate and low handover latency, and thus some level of guaranteed quality-ofservice (QoS) to support real-time applications. 3G/UMTS has been specified and implemented as an end-to-end mobile communications system. The underlying WCDMA access systems manage radio access handover (layer 1) and provide linklayer mobility (layer 2) in terms of connection setup and resource management. For the UMTS nodes to have seamless connectivity with the Internet, the UMTS core networks need to be able to support continuous and no network service session handover (layer 3 and above). A long IP handover latency results in high packet loss rate and severely degrades its end-to-end transport level performance. Network-layer handover latency has therefore been regarded as one of the fundamental limitations in IP-based UMTS networks. Therefore, it is crucial to provide efficient network-layer mobility management in UMTS/WCDMA networks for seamless end-to-end TCP connection with the global Internet. Mobility of UMTS nodes necessitates extra functionalities such as user location tracking, address registration and handover related mechanisms. The challenge to provide seamless mobility in UMTS requires localised location management and efficient IP handover management. Mobile IPv6 protocol offers a better mobility support as the extended IPv6 features with mobility mechanism are integrated to the mobile nodes. To mitigate the effect of lengthy IP handover latency, two well-known handover reducing mechanisms based on Mobile IPv6 support have been proposed in the literature. They are designed with hierarchical network management and address pre-configuration mechanism. Hierarchical management aims to reduce the network registration time, and fast-handover attempts to minimise the address resolution delay. S-MIP (Seamless Mobile IP) integrates the key benefits of the above IP mobility mechanisms coupled with local retransmission scheme to achieve packet lossless and extremely low handover latency, operating in WLAN environments. In this thesis, we explore the possible Mobile IP solutions and various IP handover optimisation schemes in IPv6 to provide seamless mobility in UMTS with the global Internet. It aims at developing an optimised handover scheme that encompasses the packet lossless and extremely low handover latency scheme in S-MIP, and applying it into the UMTS/WCDMA packet data domain. Therefore, the hybrid UMTS-SMIP architecture is able to meet the requirements of delay sensitive real-time applications requiring strict delay bound, packet lossless and low handover latency performance for end-to-end TCP connection during a UMTS IP-based handover. The overall seamless handover architecture in UMTS facilitates integrated, scalable and flexible global IP handover solution enabling new services, assuring service quality and meeting the user???s expectations in future all-IP UMTS deployment. The viability of the seamless mobility scheme in UMTS is reflected through and validated in our design model, network protocol implementation, and service architecture. We illustrate the performance gained in QoS parameters, as a result of converged UMTS-SMIP framework compared to other Mobile IPv6 variants. The simulation results show such a viable and promising seamless handover scheme in UMTS on IP handover latency reduction on its end-to-end TCP connection.

The Mobile IPv6 (MIPv6) protocol enables mobile nodes (MNs) to remain connected to other correspondent nodes (CNs) while roaming the IPv6 Internet. Home and correspondent registrations are essential parts of the MIPv6 protocol, whereby MNs register their care-of addresses (CoAs) with their home agents (HAs) and with their CNs, respectively. Security provision for home and correspondent registrations is a fundamental part of the MIPv6 protocol and has been an open research issue since the early stages of the protocol.This thesis examines state-of-the-art protocols for securing home and correspondent registrations in MIPv6 networks. The strengths and weaknesses of these protocols are discussed. The investigation of these protocols leads to the proposal of an enhanced home registration protocol and a family of correspondent registration protocols. The Enhanced Home Registration (EHR) protocol extends the basic home registration protocol defined in MIPv6 to support the location authentication of MNs to their HAs. The EHR is based on novel ideas of segmenting the IPv6 address space, using a symmetric CGA-based technique for generating CoAs, and applying concurrent CoAs reachability tests. As a result, EHR is able to reduce the likelihood of a malicious MN being successful in luring an HA to flood a third party with useless packets using MIPv6. In addition, EHR enables HAs to help in correspondent registrations by confirming MNs' CoAs to CNs. Simulation studies of EHR have shown that it only introduces a marginal increase in the registration delay, but a significant increase in the signalling overhead as a cost of supporting the location authentication of MNs.The thesis also proposes a family of correspondent registration protocols. These protocols rely on the assistance of home networks to confirm the MNs' ownership of the claimed HoAs and CoAs. The protocols consist of three phases: a creation phase, an update phase and a deletion phase. Informal and formal protocol analyses have confirmed the protocols' correctness and satisfaction of the required security properties. The protocols have been simulated extensively and the results show that they produce lower registration delay and a reduction in the signalling overhead during update and deletion phases. This is at the cost of a varying increase, depending on the protocol variant, in the registration delay and signalling overhead during the creation phase.

There is a growing range of IP-based data and voice applications using mobile devices (e.g. 3rd , 4th generation mobile phones and PDAs) and new access technologies (e.g. Bluetooth, 802.11, GPRS, ADSL). This growth is driving a desire to support mobility at the IP level � in other words, allowing an IP host to keep on communicating with other hosts while roaming between different IP subnetworks. Mobile IPv6 allows hosts to move their physical and topological attachment points around an IPv6 network while retaining connectivity through a single, well-known Home Address. Although Mobile IPv6 has been the subject of simulation studies, the real-world dynamic behavior of Mobile IPv6 is only gradually being experimentally characterised and analysed. This thesis reviews the use of Mobile IPv6 to support mobility between independent 802.11b-attached IPv6 subnets, and experimentally measures and critically evaluates how long an end to end IP path is disrupted when a Mobile IPv6 node shifts from one subnetwork to another (handoff time). The thesis describes the development of an experimental testbed suitable for gathering real-world Mobile IPv6 handoff data using publicly available, standards compliant implementations of Mobile IPv6. (An open-source Mobile IPv6 stack (the KAME release under FreeBSD) was deployed). The component of handoff time due to 802.11b link layer handoff is measured separately to assess its impact on the overall Mobile IPv6 handoff time. Using Mobile IPv6 handoff results, the likely performance impact of Mobile IPv6 handoff on a common webcam application and a bulk TCP data transfer is also evaluated. The impact of handoff on these applications clearly shows that a default Mobile IPv6 environment would be highly disruptive to real-time and interactive applications during handoff events, even if the underlying link-layer handoff was instantaneous.

This thesis has compared the Mobile IPv4 and Mobile IPv6 to find out which of them performs better when it comes to send datagram from the correspondent node to the mobile node. The tests that were made to measure performance were latency, TCP/UDP throughput, loss and delay, as well as time measurement for connectivity loss for the mobile node while roaming. The tests were done using Cisco equipments and Microsoft Windows 7 Professional OS. Due to the hardware and software used, the route of datagram was the same in both scenarios since Cisco routers and Microsoft Windows 7 OS does not support route optimization for Mobile IPv6. The results showed that Mobile IPv4 performed better in all the tests done.

Mobility is an increasingly important aspect of communication for the Internet. The usage of handheld computing devices such as tablets and smartphones is increasingly popular among Internet users. However, the current Internet protocol, IP, was not originally designed to support mobility over the Internet. Mobile users currently suffer from connection disruption when they move around. Once a device changes point of attachments between different wireless technology (vertical handoff) e.g. from WiFi to 3G, the IP address changes, and the bound session (e.g. TCP session) breaks. While the IETF Mobile IPv4 (MIPv4) and Mobile IPv6 (MIPv6) solutions have been defined for some time, and implementations are available, they have seen little deployment due to their complexity and performance. This thesis has examined how IP mobility can be supported as first class functionality, i.e. mobility can be enabled through the end hosts only, without changing the current network infrastructure. Current approaches such as MIPv6 require the use of proxies and tunnels which introduce protocol overhead and impact transport layer performance. The Identifier-Locator Network Protocol (ILNP) is an alternative approach which potentially works end-to-end, but this is yet to be tested. This thesis shows that ILNP provides mobility support as first class functionality, is implemented in an operating system kernel, and is accessible from the standard API without requiring changes to applications. Mobility management is controlled and managed by the end-systems, and does not require additional network-layer entities, only the end hosts need to be upgraded for ILNP to operate. This work demonstrates an instance of ILNP that is a superset of IPv6, called ILNPv6, that is implemented by extending the current IPv6 code in the Linux kernel. A direct performance comparison of ILNPv6 and MIPv6 is presented, showing the improved control and performance of ILNPv6, in terms of flow continuity, packet loss, handoff delay, and signalling overhead.

Dans cette thèse, nous nous intéressons à la mise en œuvre de Proxy Mobile IPv6 (PMIPv6) dans les réseaux sans fil hétérogènes, dont la topologie peut être arbitraire et spontanée. Nous proposons d'abord le concept de groupe autonome ou "cluster" qui permet le passage à l'échelle des réseaux. Ensuite nous proposons des extensions à PMIPv6, appelée Scalable Proxy Mobile IPv6 (SPMIPv6), qui prennent en compte de l'architecture en clusters au travers de l'interaction entre de multiples Local Mobility Anchors (LMAs). Nous évaluons l'aptitude à supporter le passage à l'échelle de SPMIPv6 dans un contexte de réseau maillé sans fil en faisant varier sa taille, la vitesse moyenne et la densité des terminaux mobiles. En outre, nous proposons des méthodes pour l'optimisation du routage dans SPMIPv6 pour réduire les latences des communications. Nous introduisons également un mécanisme de détection de mouvements des terminaux mobiles qui prend en compte de l'hétérogénéité des technologies d'accès. Nous implémentons l'ensemble des propositions sous Linux dans un environnement virtualisé. Nous expérimentons différents scénarios dans le mode émulation ainsi qu'en vrai grandeur pour évaluer des mesures différentes telle que le coût de signalisation, la latence de handover, la perte de paquets, le temps aller-retour (RTT), et variation de débit. Finalement, nous adressons le contexte de multi-domiciliation en proposant un concept appelé virtual Stream Control Transmission Protocol (vSCTP) et l'appliquons à l'architecture PMIPv6. Les premières simulations sous Ns-2 laissent entrevoir des bénéfices pour les scénarios d'agrégation de bande passante et les scénarios d'équilibrage de charge.