An emerging field in rainwater harvesting (RWH) is the application of communal rainwater harvesting system. This system's main advantage compared to individual RWH is the centralization of water treatment, which some users of individual RWH find difficult to maintain. Despite alleviating one concern, this communal approach does not increase the RHW system's (RWHS) reliability nor necessarily satisfy all water demands, and hence is not a major improvement in terms of system performance. This research tackles this challenge with a novel approach to communal RWH for single-family houses. Instead of the traditional communal approach to RWH which uses only one storage location, we propose connecting multiple single-family homes' RWHSs to a communal backup tank, i.e., capturing overflow from multiple RWHS, which will increase reliability and water demand met in a way that will significantly improve the current performance of communal RWH. The proposed system will potentially maximize the availability of potable water while limiting spillage and overflow. We simulated the performance of the system in two cities, Houston and Jacksonville, for multiple private and communal storage combination. Results show that volumetric reliability gains, of 1.5% - 6% and 1.5% - 4%, can be achieved for seven to ten and six to seven connected households, respectively, for Houston and Jacksonville if the emphasis is on volumetric reliability (VR). As per total storage capacity, the system achieves higher VR gains for lower total storage capacity in Houston while the system achieves higher VR gains for higher total storage capacities in Jacksonville. With regards to the total cost of ownership per household for the individual system and for the communal storage system, the lifecycle cost of the system was performed using the Net Present Value (NPV) method, with an interest rate of 7% over 30 years. The NPV of the total system costs per household in the city of Houston is lowest for nine to ten connected households, as well as comparable to the base case of a rainwater harvesting system that is not connected to a communal tank for seven and eight connected households. This communal system is more resilient and can be a worthy addition to water and stormwater infrastructures, especially in the face of climate change. / Doctor of Philosophy / An emerging field in rainwater harvesting (RWH) is the application of communal rainwater harvesting system. This system's main advantage compared to individual RWH is the centralization of water treatment, which some users of individual RWH find difficult to maintain. Despite alleviating one concern, this communal approach does not increase the RHW system's (RWHS) reliability nor necessarily satisfy all water demands, and hence is not a major improvement in terms of system performance. This research tackles this challenge with a novel approach to communal RWH for single-family houses. Instead of the traditional communal approach to RWH which uses only one storage location, we propose connecting multiple single-family homes' RWHSs to a communal backup tank, i.e., capturing overflow from multiple RWHS, which will increase reliability and water demand met in a way that will significantly improve the current performance of communal RWH. The proposed system will potentially maximize the availability of potable water while limiting spillage and overflow. We simulated the performance of the system in two cities, Houston and Jacksonville, for multiple private and communal storage combination. Results show that volumetric reliability gains, of 1.5% - 6% and 1.5% - 4%, can be achieved for seven to ten and six to seven connected households, respectively, for Houston and Jacksonville if the emphasis is on volumetric reliability (VR). As per total storage capacity, the system achieves higher VR gains for lower total storage capacity in Houston while the system achieves higher VR gains for higher total storage capacities in Jacksonville. With regards to the total cost of ownership per household for the individual system and for the communal storage system, the lifecycle cost of the system was performed using the Net Present Value (NPV) method, with an interest rate of 7% over 30 years. The NPV of the total system costs per household in the city of Houston is lowest for nine to ten connected households, as well as comparable to the base case of a rainwater harvesting system that is not connected to a communal tank for seven and eight connected households. This communal system is more resilient and can be a worthy addition to water and stormwater infrastructures, especially in the face of climate change.