The tenser analyzing power T-20 and the polarization transfer kappa in the deuteron break-up reaction Dp --> pX are calculated within a relativistic approach based on the Bethe-Salpeter equation with a realistic meson-exchange potential. Our results on T-20, kappa and the cross section are compared with experimental data and non-relativistic calculations and with the outcome of a relativization procedure of the deuteron wave function.

This report covers a study testing the possibility of adding portfolio optimization by mean-variance analysis as a tool to extend the concept of momentum strategies in contrast to naive allocation formed by Jegadeesh & Titman (1993). Further these active investment strategies are compared with a passive benchmark as well as a randomly selected portfolio over the entire study-period. The study showed that the naive allocation model outperformed the mean-variance model both economically as well as statistically. No indication where obtained for a lagged return effect when letting a mean-variance model choose weights for a quarterly holding period and the resulting investment recommendation is to follow a naive investment strategy within a momentum framework.

The basis of mixing ventilation is the airflow supply to the room by means of jets initiatedfrom the ventilation diffusers. To avoid the draught problem, the design of mixing ventilationmakes uses the throw term, which is defined as the distance to the supply air terminal inwhich the jet centreline mean velocity is decreased to a given value. Traditionally, the throw ismeasured by the supply air device manufacturer. The throw is applied by designers to estimatethe velocity levels in the occupied zone. A standard for determining the throw is the CENstandard CEN/TC156/WG4 N86 "Draft Standard. Air terminal Devices. AerodynamicsTesting And Rating For Mixed Flow Application".The measurement of the throw is very time consuming even with the free jets and theinfluence of the room (the effect of confinement) is not considered. The objective of thepresent study is to give a basis for modifying the existing design and testing method used topredict the velocities in the occupied zone during the design process. A new method whichmay probably be more easier than the existing methods and at the same time give a betterprecision by including the confinement effect.In this thesis two methodological systems of experiment and numerical simulations have beenused. The numerical predictions are used in comparison with the measurements. Thereasonable agreement of the above mentioned methods is implemented to numerical study ofthe other room configurations which are not experimentally studied. This examining methodallows the possibility of studying a lot of configurations and in this manner generalising of theresults. Although the experimental part was made for both model-scale and full-scale testrooms, a large amount of data was obtained for a new test room whose dimension aresystematically varied. All of studies have been made for the isothermal case and themeasurements of velocities and pressures conducted along the room perimeters. The effect ofshort and deep rooms on the properties of the jet ( velocities, pressure, integral scale, jetmomentum, the rate of spreading of jet and turbulence intensities) have been carried out.Some old and recent investigations have been examined. Specially the concept of correlationsfrom open to closed rooms is criticised. It is also shown that the flow field in a confined roomis affected by many other factors than the Reynolds number. The surface pressure on theperimeters was used to calculate the reaction forces at the corners which causes recirculatingbubbles at corners. A study of the turbulent axisymmetric jet which is the basic element inturbulent shear flows and some restrictions of the traditional measurement techniques at theregion of interest in ventilation applications are discussed. The jet momentum is measured byweighing on a balance. Also a study of jets which collide with a wall , that is impinging jet,the effect of walls and confinement on the jet momentum have experimentally andnumerically been carried out. A new momentum balance model was developed for both thefree jet and confined one. An empirical relation has been found for estimation of the room’srotation centre which is used for validation of CFD results.Finally, it is found that the jets in a ventilated room which are a combination of free jet, walljet and impinging jet differ from the traditional wall jets. The rate of spreading of the jet andthe maximum velocity decay in a ventilated room are also different depending on the roomsize and its confinement.

A wind turbine needs to be controlled to ensure its safe and optimal operation, especially during high wind speeds. The most common control objectives are to limit the power and rotational speed of the wind turbine by using pitch control. Aero Energy is a company based in Potchefstroom, South Africa, that has been developing and manufacturing wind turbine blades since 2000. Their most popular product is the AE1kW blades. The blades have a tendency to over-speed in high wind speeds and the cut-in wind speed must be improved. The objective of this study was to develop an active pitch control system for wind turbines. A prototype active pitch control system had to be developed for the AE1kW blades. The objectives of the control system are to protect the wind turbine from over-speeding and to improve start-up performance. An accurate model was firstly developed to predict a wind turbine’s performance with active pitch control. The active pitch control was implemented by means of a two-stage centrifugal governor. The governor uses negative or stalling pitch control. The first linear stage uses a soft spring to provide improved start-up performance. The second non-linear stage uses a hard spring to provide over-speed protection. The governor was manufactured and then tested with the AE1kW blades. The governor achieved both the control objectives of over-speed protection and improved start-up performance. The models were validated by the results. It was established that the two-stage centrifugal governor concept can be implemented on any wind turbine, provided the blades and tower are strong enough to handle the thrust forces associated with negative pitch control. It was recommended that an active pitch control system be developed that uses positive pitching for the over-speed protection, which will eliminate the large thrust forces. Keywords: pitch control, wind turbine, centrifugal governor, over-speed protection, cut-in wind speed, blade element-momentum theory, rotor, generator, stall, feathering. / Thesis (M.Ing. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2009.

A wind turbine needs to be controlled to ensure its safe and optimal operation, especially during high wind speeds. The most common control objectives are to limit the power and rotational speed of the wind turbine by using pitch control. Aero Energy is a company based in Potchefstroom, South Africa, that has been developing and manufacturing wind turbine blades since 2000. Their most popular product is the AE1kW blades. The blades have a tendency to over-speed in high wind speeds and the cut-in wind speed must be improved. The objective of this study was to develop an active pitch control system for wind turbines. A prototype active pitch control system had to be developed for the AE1kW blades. The objectives of the control system are to protect the wind turbine from over-speeding and to improve start-up performance. An accurate model was firstly developed to predict a wind turbine’s performance with active pitch control. The active pitch control was implemented by means of a two-stage centrifugal governor. The governor uses negative or stalling pitch control. The first linear stage uses a soft spring to provide improved start-up performance. The second non-linear stage uses a hard spring to provide over-speed protection. The governor was manufactured and then tested with the AE1kW blades. The governor achieved both the control objectives of over-speed protection and improved start-up performance. The models were validated by the results. It was established that the two-stage centrifugal governor concept can be implemented on any wind turbine, provided the blades and tower are strong enough to handle the thrust forces associated with negative pitch control. It was recommended that an active pitch control system be developed that uses positive pitching for the over-speed protection, which will eliminate the large thrust forces. Keywords: pitch control, wind turbine, centrifugal governor, over-speed protection, cut-in wind speed, blade element-momentum theory, rotor, generator, stall, feathering. / Thesis (M.Ing. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2009.

Full-depth profile data reveal semidiurnal internal waves radiating from Mendocino Escarpment. Energy- and momentum-fluxes are lost between stations bracketing the first surface reflection to the north. A plausible interpretation is that wave energy is dissipated as a consequence of superposition of incident and reflected waves. Because there are no profiler data in the superposition region, a theoretical approach is used to bridge the gap. Assuming zonal independence, constant stratification and linear decay in the dissipation region, the forcing on the mean equations is evaluated with parameters consistent with Mendocino Escarpment data. Both superposition and dissipation cause momentum-flux divergence forcing. An Ekman-like balance is anticipated with predicted mean zonal flows u~O(1-2 cm/s), comparable to surface wind-forced Ekman currents.

We develop the theory of parton distributions f(_a)(π, k(^t2), μ(^2), unintegrated with respect to transverse momentum k(_t), from a phenomenological standpoint. In particular, we demonstrate a convenient approximation in which the unintegrated functions are obtained by explicitly performing the last step of parton evolution in perturbative QCD, with single-scale functions a(π, Q(^2) as input. Results are presented in the context of DGLAP and combined BFKL-DGLAP evolution, but with angular ordering imposed in the last step of the evolution. We illustrate the application of these unintegrated distributions to predict cross sections for physical processes at lepton-hadron and hadron-hadron colliders. The use of partons with incoming transverse momentum, based on k(_t)-factorisation, is intended to replace phenomenological "smearing" in the perturbative region k(_t) > k(_o) (k(_o) ≈ 1 GeV), and enables the full kinematics of a process to be included even at leading order. We apply our framework to deep inelastic scattering and the fitting of F(_2)(π, Q(^2), to the transverse momentum spectra of prompt photons in hadroproduction and in photoproduction, and to the topical problem of bb production at HERA. Finally, we address the issue of parton-parton recombination (shadowing) at very low values of π, building on recent work by Kovchegov and others to make predictions for the likely magnitude of shadowing effects at the LHC.

In this thesis, the kinematic properties of Single Gimballed Control Moment Gyroscopes (SGCMGs) are investigated. Singularity phenomenon inherent to them is explained. Furthermore, existing steering laws with their derivations are given. A novel steering law is developed that may provide singularity avoidance or may be used for quick transition through a singularity with small torque errors. To avoid singularity angular momentum trajectory of the maneuver is to be simulated in advance for the calculation of singularity free gimbal histories. The steering law, besides accurately generating required torques, also pushes the system to follow trajectories closely if there is a small difference between the planned and the realized momentum histories. Thus, it may be used in a feedback system. Also presented are number of approaches for singularity avoidance or quick transition through a singularity. The application of these ideas to the feedback controlled spacecraft is also presented. Existing steering laws and the proposed method are compared through computer simulations. It is shown that the proposed steering law is very effective in singularity avoidance and quick transition through singularities. Furthermore, the approach is demonstrated to be repeatable even singularity is encountered.

In this investigation, the flow friction associated with laminar pulsating flows through porous media was numerically studied. The problem is of interest for understanding the regenerators of Stirling and pulse tube cryocoolers. Two-dimensional flow in a system composed of a number of unit cells of generic porous structures was simulated using a CFD tool, with sinusoidal variations of flow with time. Detailed numerical data representing the oscillating velocity and pressure variations for five different generic porous structure geometries in the porosity range of 0.64 to 0.84, with flow pulsation frequency of 40 Hz were obtained, and special attention was paid to the phase shift characteristics between the velocity and pressure waves. Based on these detailed numerical data, the standard unsteady volume-averaged momentum conservation equation for porous media was then applied in order to obtain the instantaneous as well as cycle-averaged permeability and Forchheimer coefficients. It was found that the cycle-averaged permeability coefficients were nearly the same as those for steady flow, but the cycle-averaged Forchheimer coefficients were about two times larger than those for steady flow. Significant phase lags were observed with respect to the volume-averaged velocity and pressure waves. The parametric trends representing the dependence of these phase lags on porosity and flow Reynolds number were discussed. The phase difference between pressure and velocity waves, which is important for pulse tube cryocooling, depended strongly on porosity and flow Reynolds number.

Thesis (MScEng (Industrial Engineering))--University of Stellenbosch, 2011. / ENGLISH ABSTRACT: Applying the Industrial Engineering systems approach, this dissertation utilised the theories and propositions of previous studies to argue (model) the cause of financial herd behaviour and the subsequent momentum effect. From this, a hypothesis was postulated to test: whether momentum is a common attribute amongst top performing shares, whether technical analysis indicators can better identify the phenomenon, and whether the return from these shares would justify momentum as a viable investment strategy. A unique experiment derived from previous academic studies was adapted to explore the degree of the momentum phenomenon. This was done by ranking shares according to both technical analysis as well as pure price performance momentum criteria. Returns were translated as a rank in relation to the market as a whole, thereby minimising any effects that different market periods could have on a momentum return relationship. The degree of the relationship was evaluated by applying the alternative Spearman Rank Order Correlation Co-efficient in conjunction with a permutation test to determine the statistical significance of any trends. The viability of the phenomenon as an investment strategy was gauged by comparing annualised average returns against both the market capitalisation weighted JSE All Share Index as well as against an un-weighted representation of the market. The results revealed a seemingly unambiguous co-dependence between momentum and return with statistically significant trends being ever present. Applying the maximum taxes and trading costs revealed that the highest ranked momentum shares did indeed outperform both market benchmarks from the period of January 1990 to August 2009, suggesting the validity of the philosophy as an investment strategy. The outcome of the study in part rejected the null hypothesis, as technical indicators were unable to identify future top performing shares better, with price performance momentum measures delivering the superior returns. Future studies may include optimising the various technical indicators towards the JSE rather than using generic settings. Other interesting topics could include combining momentum with other investment strategies to investigate synergy and further pinpointing the source of the phenomenon. Over the past number of years, tighter controls and monitoring of investments has resulted in the documentation of the individual number of shareholders who are buying and selling shares. Utilising this data over the next number of years, an experiment could attempt to relate the number of individual investors trading in a particular share to herd behaviour and the subsequent momentum effect. / AFRIKAANSE OPSOMMING: Die verhandeling, binne die bedryfsingenieursstelsels benadering, gebruik teorieë en voorstelle van vorige studies om die gevolge van finansiële gedrag en die gevolglike momentum effek te bespreek. Uit die analise is ‘n voorstel saamgestel om die volgende te toets:Is momentum ‘n algemene verskynsel by aandele wat goed presteer, en kan tegniese analitiese indikatore die verskynsel beter verklaar, en dui die opbrengs van die aandele daarop dat momentum ‘n bruikbare beleggingsstrategie is. ‘n Unieke eksperiment uit vorige studies is aangepas om die aard van die momentum verskynsel te ondersoek. Dit was gedoen deur aandele volgens beide tegniese analise asook suiwer prestasie momentum kriteria te klassifiseer. Opbrengste is met die hele mark in konteks geplaas om sodoende enige impak van verskillende mark tye op die momentum opbrengs verhouding te elimineer. Die verband is opgestel deur die alternatiewe “Spearman Rank Order Correlation koëffisiënt” saam met permutasie toetse te gebruik om die statistiese belangrikheid van enige neigings uit te wys. Die geldigheid van die verskynsel as ‘n beleggingsstrategie is gemeet deur jaarlikse gemiddelde opbrengste teen beide die markkapitalisasie geweeg teen die JSE Alle Aandele Indeks sowel as ‘n ongeweegde verteenwoordiging van die mark te bepaal. Die resultate dui op ‘n interafhanklikheid tussen momentum en opbrengste met statistiese neigings altyd teenwoordig. Deur die maksimum belasting en verhandelingskoste toe te pas wys dit dat die hoogste momentum uitgewyste aandele die markriglyne uitpresteer het van Januarie 1990 tot Augustus 2009 wat die geldigheid van die benadering as ‘n beleggingsstrategie bevestig. Die studie verwerp die nul hipotese gedeeltelik in die sin dat dit nie toekomstige top presterende aandele kan uitwys nie, maar aan die ander kant gee prysprestasie momentum meting wel buitegewone opbrengs. Toekomstige studies mag die optimisering van verskeie tegniese indikatore van die JSE insluit, ‘n kombinasie van momentum met ander beleggingsstrategieë gebruik, en verder die bron van die verskynsel vas pen. Oor die afgelope aantal jare het beter beheer en die monitoring van beleggings die dokumentasie van individuele aandeelhouers moontlik gemaak. Hieride data sou kon gebruik word as ‘n toets om die korrelasie tussendie aantal aandeelhouers wat ‘n spesifieke aandeel verhandel en tropgedrag te bepaal en om dit te gebruik om die momentum effek beter te verklaar.