The subject of the Diploma's thesis is " Construction and technological solutions of CEITEC Science Park in Brno". The content is a solution of the whole project from a commercial, construction-technological and time costingness side. The purpose was a preparation of all works before starting an execution.

Micro Frontends är en ny mjukvarusystemarkitektur som påstås lösa många av problemen som drabbar monolitiska frontends med stora kodbaser. Den begränsade andelen forskning som undersökt konceptet har nått motsägelsefulla slutsatser kring arkitekturens effekt i praktiken. Detta är problematiskt då många företag överväger att migrera till arkitekturen men är tveksamma, vilket motiveras av den bristande kunskapen om konceptet. Denna kvantitativa studie ämnar undersöka om utvecklare som jobbar med Micro Frontends upplever dess fördelar och nackdelar genom att jämföra deras upplevelse med utvecklare som jobbar med en monolitisk frontend. Datan samlades in genom en surveyundersökning och analyserades med statistiska metoder. Resultaten av den kvantitativa analysen visade att kodduplicering samt att hålla ett UX konsekvent är problematiska aspekter vid användandet av Micro Frontends. Studiens låga svarsfrekvens gör att dessa resultat inte anses som generaliserbara. / Micro Frontends is a new software system architecture that is said to solve many of the problems that exist in monolithic frontends with large codebases. The limited amount of research that has examined the concept have reached contradictory conclusions about the effect of the architecture in practice. This is problematic as many companies are considering migrating to the Micro Frontend architecture but are hesitant, which is motivated by the lack of knowledge about the concept. This quantitative study aims to investigate whether developers working with Micro Frontends experience its theorized advantages and disadvantages by comparing their experience with developers working with a monolithic frontend. The data were collected through a survey and analyzed using statistical methods. The results of the quantitative analysis showed that code duplication and keeping a consistent UX is problematic when using Micro Frontends. The study's low response rate however means that these results are not considered generalizable.

The assignment of this diploma thesis is the proposal of the Christian sacral centre as an extension of a current site of pilgrimage. Site is situated near Napajedelská brána by Zlin. Proposal is based on previous analysis of the regions of Valašsko and Haná. One of the most serious problems is a lack of spiritual and liturgical sites in the area of Zlín. The analysis and synthesis preceding this diploma thesis are enclosed. The analysis of sites of pilgrimage in the area of Zlín was one of the studied subjects. The assignment of the diploma thesis was created using a combination of discovered data – design of the site of pilgrimage including a church and spiritual centre. This thesis deals with the design of a church as a site of pilgrimage, facilities, accomodation for clergymen and pilgrims. The composition is based on three main objects – church, entrance house and accomodation. The composition is complemented by campanile and „baptistery“. An object itself has two above-ground floors and basement with spa. Some of the spaces in the building have to be functionally separated due to different approach of visitors. Part of the building is a garden which is ideologically and functionally inspired by monastery claustrum.

Subject of the solution master´s thesis is new civil building. It is five floors building with underground floor. The structual system is made by combination of RC frame and loadbearing masonry with monoplane roof. In underground floor is a garage. In First floor is designed for commercial and comunal activities. In next floors there is always 8 flats. Building is located in straight terrain in the development area of new houses in Zlin in area Bartosova.

(EN) In the first part of this work, analytical methods for determination of impurities of active pharmaceutical ingredients (API) in combined pharmaceutical dosage forms were developed and validated. Development of the methods covered both the optimization of sample preparation procedure and chromatographic conditions. The methods were validated according to International Conference on Harmonization guideline and both of them were confirmed to be able to analyze stability samples. Impurities in paracetamol, codeine phosphate hemihydrate and pitophenone hydrochloride in the presence of fourth API fenpiverinium bromide were separated by using ion-pair reversed phase chromatography with gradient elution. Symmetry C18, 250 x 4,6 mm, 5 µm heated to 35 řC was used as a separation column. A diode array detector was used. The detection wavelengths were set as follows: 220 nm for paracetamol impurity K, 245 nm for paracetamol and its other impurities and 285 nm for codeine, pitophenone and their impurities. Impurities in valsartan, amlodipine besylate and hydrochlorothiazide were separated by reversed phase UHPLC method with gradient elution. Chromatographic column Zorbax Eclipse C8 RRHD, 100 x 3,0 mm, 1,8 µm heated to 30 řC and spectrophotometric detection were used. The detection wavelengths were set as...

Flera företag använder sig än idag av mjukvarusystem som är uppbyggda med äldre mjukvaruarkitektur som den monolitiska. Ett av dessa företag är Consid vars personalsystem är uppbyggt med det utdaterade ramverket klassisk ASP och där användargränssnitt samt logik kan direkt kommunicera med varandra. Detta medför begränsningar som uppstår till följd av brister i modularitet på grund av valet av mjukvaruarkitektur, vilket försvårar vidareutveckling och ändringar i ett system. Dessa begränsningar påverkar i sin tur parametrar som prestanda, skalbarhet, säkerhet, robusthet samt integrering med modernare tekniker.  I denna rapport presenteras en litteraturstudie samt en semistrukturerad intervjustudie, i syfte att undersöka vilka mjukvaruarkitekturer som är lämpliga att implementera vid en modernisering av en monolitisk mjukvaruarkitektur. Arbetet diskuterade också vilka utmaningar som kan uppstå vid en sådan modernisering och hur de hanteras på ett effektivt sätt. Ett bedömningsschema med önskvärda parametrar, med avseende på skalbarhet, prestanda, säkerhet och robusthet, togs fram för att underlätta avgörandet vid val av mjukvaruarkitektur. Utifrån detta, beslutades det att en prototyp med en REST-baserad arkitektur skulle implementeras och utvärderas.  Resultatet av prototypen, till följd av re-architecting, visade en ökad modularisering av mjukvaruarkitekturen. I jämförelse mot med det tidigare systemet har den nya prototypen ingen större påverkan på prestanda i form av responstid. Däremot bidrog prototypen till förbättrad skalbarhet när det gäller vidareutvecklingen av systemet, eftersom det förenklar införandet av ny funktionalitet. Prototypen hade också högre säkerhet genom att isolera lager ifrån varandra samt dölja underliggande detaljer i implementationen. Dessutom blev prototypen inte bara mer robust till följd av modulariseringen, men även enklare att utföra integrationstester samt destruktiva tester mot. / Several companies still use software systems that are built with older software architecture such as the monolithic one. One of these companies is Consid, whose personnel system is built with the outdated framework Classic ASP and where the user interface and logic can directly communicate with each other. This entails limitations that arise because of shortcomings in modularity due to the choice of software architecture, which complicates further development and changes in a system. These limitations in turn, affect parameters such as performance, scalability, security, robustness, and integration with modern technologies. In this work, a literature study was conducted as well as a semi-structured interview study in order to investigate which software architectures are suitable to implement when a modernization of a monolithic software architecture, is carried out. The work also discussed the challenges that may arise in a modernization of the software architecture and how they are handled efficiently. An assessment scheme with desirable parameters regarding scalability, performance, security, and robustness, was developed to facilitate the decision in the choice of software architecture. Based on this, it was decided that a prototype with a REST-based architecture would be implemented and evaluated. The result of the prototype, following re-architecting, showed an increased modularization of the software architecture. Compared to the previous system, the new prototype has no major impact on performance in terms of response time. However, the prototype contributed to better scalability in the further development of the system as it simplifies the introduction of new functionality. The prototype also had higher security by isolating layers from each other and hiding the underlying details in the implementation. In addition, the prototype not only became more robust because of the modularization, but also easier to perform destructive tests against.

The subject of my diploma thesis is preparation of realization of Active center. Diploma thesis includes technological regulation for concrete constructions and the roof, project of machine set, the inspecting and testing plans, plan of BOZP, the budget and the time table of main construction object. I alson did the project of the building site facilities and drawings needed.

This thesis summarizes a project of new residential building in Prostejov. The goal of the thesis was to create documentation for the project´s design and implementation. The building consists of four floors above the ground, two underground floors and a flat roof. The building is rectangular shaped with a rebound of 4th floor above the ground. The structural system of the building is monolitic reinforced concrete system, with combined system in 4th floor. The thesis includes the preparatory and study reports, architectural and construction solutions, fire-safety of building and equipment solutions.

This thesis deals with the exploration and evaluation of the existing bridge carried him on the highway D2. The work is divided into theoretical and practical parts. The theoretical part focuses on the technical surveys, diagnosis of building structures and some methods of investigation and testing of building structures. In the practical part the visual inspection and diagnosis of disorders of the highway bridge substructures ev. No. D2-058, to determine material characteristics substructure and evaluate the state of the bridge. In conclusion, the practical part of the recommendations for the design and method of repairing the bridge.

The diploma thesis is a project of an apartment block with a total number of 10 apartments. The building is located in the cadastral areas of Žirovnice 797154 on the numbers of parcels 653/1, 634/1, 634/2. The building is a five-storey building with four floors above the ground and one underground floor. Floors are designed as a brick system with the contact insulation. Underground floor consists of a reinforced concrete wall monolith which is based on the footings. Horizontal structures are made up of prefabricated ceramic system Miako and a reinforced concrete monolithic slab. The roof is flat and single-layer. The floors are connected by monolithic reinforced concrete staircase and an elevator which is located in the shaft.