The aim of the diploma thesis is selected parts of the construction project of the apartment block in Hejčín, Olomouc. It deals in detail with the most optimal design of the machine assembly, the assessment of the lifting mechanism, the equipment of the building site, the timetable and, last but not least, the itemized budget of the structural work of the apartment block. The work is based on the technical documentation from the borrowed project documentation.

This diploma thesis deals with the design and elaboration of the project documentation for the works required for the completion and modernization of Žamberk Health Clinic. Specifically it deals with the extension of ambulatory psychiatry of its inpatient ward. The object in focus is located in the built-up part of Žamberk and it is located in the area of the Specialist Asylum Albertinum Žamberk. The building is designed as an annex with one underground and two aboveground floors with a flat roof. It is divided into three units: a dormitory psychiatric care, the dormitory gerontopsychiatric care unit and the therapeutic block. The suggestion was to keep up the requirement to minimize the interference of existing outpatient psychiatric facility and to create operationally interconnected unit between the existing object and the extension at the same time. The construction system is considered from traditional building materials. The fundamentals are made by a combination of plain concrete and lost formwork. Vertical carrier structures are made of reinforced concrete monolithic walls for the underground floor and brick walls made of ceramic blocks for both aboveground floors. Vertical partitioning structures are also walled from ceramic blocks. Horizontal carrier structures are designed as reinforced concrete monolithic continuous boards. The object is insulated with ETICS, the roof is flat and single-skinned

The subject of my diploma thesis is selected parts of the construction technology project of Tomas Bata University in Zlín. The content of the work is mainly elaborated technological regulation for making the monolithic ceiling shell of the main aula of the building, processing of the control and test plan and drawings of the ceiling shell. Next, I worked on the design of suitable transport routes to the construction site, the processing of the studies of the implementation of the main technological stages, the design and the processing of the drawings of the construction site, which varies in time depending on the progress of the technological stages, the design and assessment of the lifting mechanisms and machines, time and financial plan, the timetable for the rough construction and the main technological stages, budget of the rough construction, health and safety at work.

The subject of the diploma thesis is the new building of the alliative care center in Žamberk. It is a detached building, which is partly basement and has three above-ground floors. From the operating point of view, it is a medical-social facility. The facility has a range of palliative care services - a dormitory, a day hospice, a mobile hospice facility and outpatient services. Due to the type of facilities and persons using the facilities, emphasis was placed on the location of an object situated on the outskirts of the city in the area of other social and health facilities designed for long-term residence in a quiet, quiet environment with plenty of surrounding greenery. The mass of the building consists of several blocks, the shape and material solution is simple. The construction system is a monolithic reinforced concrete skeleton, coated with ceramic blocks. Several types of flat roofs are covered, 2NP is designed as a receding floor with a barrier-free terrace.

The aim of my diploma thesis is the elaboration of the project documentation for the construction of the administrative building. It is a seven-storey building with one underground and six above-ground floors. The underground floor is halfway under the terrain and used for garage parking. The loose part will be used for barrier-free entrance to the building and partly as a cafe. Above-ground floors are used as office spaces. The administrative building is designed as a monolithic reinforced concrete structure in the underground floor, the above-ground floors are designed as a column monolithic system for flexible use of office space. The static calculation will be carried out according to valid ČSN EN standards.

This master's thesis presents the design and the realization of a low noise amplifier (LNA) for the S band of radio frequency spectrum from 2.3 GHz to 2.4 GHz. This thesis is mainly focused on stability and impedance matching networks study. Ansoft Designer and ANSYS HFSS programs are used for this design to simulate the LNA. Different low noise devices are simulated in order to find the best results for the final design. Moreover, a coaxial cavity resonator is designed in the input of the LNA and works as a band pass filter. Finally, the LNA is fabricated and its properties compared with the simulation results.

Subject of the solution master´s thesis is new domestic building with polyfunction. It is four floors building with underground floor. Construction system is made by column with monolithic ferron concrete ceilings and monoplane roof. In underground floor is a garage. In First floor on south side is a space designated for commercial activities. Next on the floor is technical facilities and 7 flats. In next floors there is always 11 flats. Building is located in straight terrain in the development area of new houses in Zlin in area Bonecko.

The goal of this diploma thesis is the processing of the building-technological project for Health University in Prague. For the thesis there was elaborated a technic report, situation of the construction place, object time schdule and financial plan, the study of the implementation of technologist. Stages, project of construction site equipment, design of mechanical assembly, technological regulation for the implementation of monolithic vertical and horizontal load-bearing structures together with inspection and test plan. Furthermore, the thesis contains a schedule of the main building, a plan for securing material resources and a financial analysis of the formwork. The basis for preparation thesis is the project documentation of the construction.

The project documentation, processed in the framework of the diploma thesis, solves the new building of the multifunctional house in Žďár nad Sázavou. The building is made of traditional brick technology of brick fittings, with insulation, ceilings are reinforced concrete monolithic, roof sloping in two variants. Commercial premises are located on the ground floor on the south side. Furthermore, on the floor there are technical facilities for offices and storage space for housing units and offices. On the next floors there are always 3 residential units. The building is located on flat terrain in the rapidly developing part of the city. The building envelope and individu-al structures are designed to the entire object it was as energy- consuming as possible, and do not pump irreparably by nature its natural resources in a larger quantity than necessary.

The subject of the diploma thesis is the elaboration of an architectural study of the reconstruction of the pre-plant zone of the Facelift of the Dukovany power plant. The construction site is an area that belongs to the village of Dukovany and borders the village of Rouchovany. As a whole, this area is in poor technical and architectural condition. However, its location gives potential for new uses. The solved area belongs to the ČEZ nuclear power plant.