Spelling suggestions: "subject:"mts"" "subject:"mtm""
1 |
Re-conservation of Wood from the Seventeenth-Century Swedish Warship the Vasa with Alkoxysilanes: A Re-treatment Study Applying Thermosetting ElastomersCabrera Tejedor, Carlos 2010 December 1900 (has links)
The purpose of this study was to explore the feasibility of re-treating artifacts
previously conserved by PEG impregnation with alkoxysilanes. The study tried to
evaluate pros and cons of re-conserving artifacts with this type of silanes. A series of
experiments were conducted focusing on small, wood samples from the Vasa Museum
Collection, to test different re-conservation methods. Three different procedures
involving alkoxysilanes were implemented in order to re-conserve the samples.
The study revealed the techniques are an efficient re-conservation method in
which highly satisfactory results can be achieved. The re-treated samples present
minimal volumetric distortion without significant collapse or shrinkage of the wood
structures. This minimal distortion is primarily produced by the transition from swollen
waterlogged wood to a dry conserved wood, and not as a result of collapse or shrinkage
during treatment. Due to the negligible thickness of the polymer coating (a few microns),
the samples acquire physical properties extremely close to the original dry wood.
Moreover, other physiochemical properties are obtained from the consolidation
with alkoxysilanes; the re-conserved wood becomes hydrophobic, chemically inert,
resistant to chemical attacks (e.g., acids or bases), and resistant to ultraviolet light. These
newly acquired characteristics drastically reduce the preventive conservation measures
needed in museum display cabinets or during transport.
Despite the excellent results, the procedure is not reversible, thus does not
comply with one of the main premises traditionally accepted in conservation. Therefore,
a careful study assessing benefits and disadvantages in a case-by-case basis should be
assessed by conservators, restorers, and curators before applying this method to
waterlogged material culture.
|
2 |
A comprehensive survey of "metamaterial transmission-line based antennas: design, challenges, and applications"Alibakhshikenari, M., Virdee, B.S., Azpilicueta, L., Naser-Moghadasi, M., Akinsolu, M.O., See, C.H., Liu, B., Abd-Alhameed, Raed, Falcone, F., Huyen, I., Denidni, T.A., Limiti, E. 03 August 2020 (has links)
Yes / In this review paper, a comprehensive study on the concept, theory, and applications of composite right/left-handed transmission lines (CRLH-TLs) by considering their use in antenna system designs have been provided. It is shown that CRLH-TLs with negative permittivity (ε <; 0) and negative permeability (μ <; 0) have unique properties that do not occur naturally. Therefore, they are referred to as artificial structures called “metamaterials”. These artificial structures include series left-handed (LH) capacitances (C L ), shunt LH inductances (L L ), series right-handed (RH) inductances (LR), and shunt RH capacitances (CR) that are realized by slots or interdigital capacitors, stubs or via-holes, unwanted current flowing on the surface, and gap distance between the surface and ground-plane, respectively. In the most cases, it is also shown that structures based on CRLH metamaterial-TLs are superior than their conventional alternatives, since they have smaller dimensions, lower-profile, wider bandwidth, better radiation patterns, higher gain and efficiency, which make them easier and more cost-effective to manufacture and mass produce. Hence, a broad range of metamaterial-based design possibilities are introduced to highlight the improvement of the performance parameters that are rare and not often discussed in available literature. Therefore, this survey provides a wide overview of key early-stage concepts of metematerial-based designs as a thorough reference for specialist antennas and microwave circuits designers. To analyze the critical features of metamaterial theory and concept, several examples are used. Comparisons on the basis of physical size, bandwidth, materials, gain, efficiency, and radiation patterns are made for all the examples that are based on CRLH metamaterialTLs. As revealed in all the metematerial design examples, foot-print area decrement is an important issue of study that have a strong impact for the enlargement of the next generation wireless communication systems. / This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER, UE) under Grant RTI2018-095499-B-C31, in part by the Innovation Programme under Grant H2020-MSCA-ITN-2016 SECRET-722424, and in part by the financial support from the U.K. Engineering and Physical Sciences Research Council (EPSRC) under Grant EP/E022936/1.
|
3 |
Antenna Performance Control using Metamaterials / Contrôle des performances des antennes par les métamatériauxAyad, Houssam 02 June 2012 (has links)
Le travail de cette thèse est en rapport avec les métamatériaux et ses applications. Tout d’abord, un état de l’art est dressé en présentant leur évolution depuis leur apparition en 19ème siècle jusqu’au nos jours. Les notions sur les milieux chirale, bi-anisotrope, cristaux photoniques et quelques applications dans ces milieux sont données. Ensuite, nous présentons les équations classiques de Maxwell dans les milieux complexes. L’effet bi-anisotrope dans les métamatériaux est ensuite validé par l’extraction des paramètres caractéristiques du matériau main gauche (LHM). La validation a été faite en utilisant deux types différents du résonateur avec inclusion (SRR). Les métamatériaux sont également étudiés comme des cristaux photoniques quand les dimensions utilisées sont de l’ordre de la longueur d’onde correspondant.De plus, les résonateurs SRR et multi-SRR sont analysés du point de vue analytique et électromagnétique afin d’extraire leur fréquence de résonance. Par conséquent, ces composants peuvent être introduits dans différents types de conception; La surface conductrice magnétique artificielle (AMC) illustre un cas explicite et efficace de ces derniers. Une antenne dipôle, placée sur cette surface à la place d’un plan de masse conventionnel, a été étudiée comme une application des métamatériaux. Les résultats relatifs sur la directivité, le gain et le coefficient de réflexion montrent une nette amélioration. Une antenne multi-bandes, comme une autre application des métamatériaux, a également été conçue et simulée. Le résonateur SRR est inséré dans l’antenne de départ afin de créer une autre résonance, et par conséquent une autre bande est ainsi créée. / The work in this thesis deals with metamaterials, its components and applications. A historical overview about these materials, features and researches in the domain are presented. Chiral media, binaisotropic materials and photonic crystals are also studied in order to visualize physics behind metamaterials.Electromagnetic properties in complex media are widely investigated. Starting from Maxwell’s equations, bi-anisotropic materials and their effect are deeply analyzed whereas two types of Split Ring Resonator (SRR) are treated to determine constitutive parameters of Left Handed Materials (LHM). The metamaterials are also studied as photonic crystals since the effective medium approach is not applicable when the dimensions of the inclusions tend to the operating wavelength.Moreover, SRRs and Multi SRRs are synthesized analytically and electromagnetically in order to extract their resonant frequencies. Consequently, these components could be introduced in any design; Artificial Magnetic Conductor (AMC) surface is an efficient case. Thus, a low profile antenna positioned over such surface is examined as an application of metamaterials. The results of directivity, gain and reflection coefficient are of great importance and affirm the employing of metamaterials in such applications. A dual band PCB antenna, as another application of metamaterials, is designed and simulated. The SRR element studied in the previous chapters is used as the trap which inserted in the arm of the antenna in order to create another resonance, and consequently another band is created.
|
Page generated in 0.0514 seconds