The purpose of this study was to explore the feasibility of re-treating artifacts previously conserved by PEG impregnation with alkoxysilanes. The study tried to evaluate pros and cons of re-conserving artifacts with this type of silanes. A series of experiments were conducted focusing on small, wood samples from the Vasa Museum Collection, to test different re-conservation methods. Three different procedures involving alkoxysilanes were implemented in order to re-conserve the samples. The study revealed the techniques are an efficient re-conservation method in which highly satisfactory results can be achieved. The re-treated samples present minimal volumetric distortion without significant collapse or shrinkage of the wood structures. This minimal distortion is primarily produced by the transition from swollen waterlogged wood to a dry conserved wood, and not as a result of collapse or shrinkage during treatment. Due to the negligible thickness of the polymer coating (a few microns), the samples acquire physical properties extremely close to the original dry wood. Moreover, other physiochemical properties are obtained from the consolidation with alkoxysilanes; the re-conserved wood becomes hydrophobic, chemically inert, resistant to chemical attacks (e.g., acids or bases), and resistant to ultraviolet light. These newly acquired characteristics drastically reduce the preventive conservation measures needed in museum display cabinets or during transport. Despite the excellent results, the procedure is not reversible, thus does not comply with one of the main premises traditionally accepted in conservation. Therefore, a careful study assessing benefits and disadvantages in a case-by-case basis should be assessed by conservators, restorers, and curators before applying this method to waterlogged material culture.

<p>Biofouling, the accumulation of biomolecules, cells, organisms and their deposits on submerged and implanted surfaces, is a ubiquitous problem across various human endeavors including maritime operations, medicine, food industries and biotechnology. Since several decades, there have been substantial research efforts towards developing various types of antifouling and fouling release approaches to control bioaccumulation on man-made surfaces. In this work we hypothesized, investigated and developed dynamic change of the surface area and topology of elastomers as a general approach for biofouling management. Further, we combined dynamic surface deformation of elastomers with other existing antifouling and fouling-release approaches to develop multifunctional, pro-active biofouling control strategies. </p><p>This research work was focused on developing fundamental, new and environment-friendly approaches for biofouling management with emphasis on marine model systems and applications, but which also provided fundamental insights into the control of infectious biofilms on biomedical devices. We used different methods (mechanical stretching, electrical-actuation and pneumatic-actuation) to generate dynamic deformation of elastomer surfaces. Our initial studies showed that dynamic surface deformation methods are effective in detaching laboratory grown bacterial biofilms and barnacles. Further systematic studies revealed that a threshold critical surface strain is required to debond a biofilm from the surface, and this critical strain is dependent on the biofilm mechanical properties including adhesion energy, thickness and modulus. To test the dynamic surface deformation approach in natural environment, we conducted field studies (at Beaufort, NC) in natural seawater using pneumatic-actuation of silicone elastomer. The field studies also confirmed that a critical substrate strain is needed to detach natural biofilm accumulated in seawater. Additionally, the results from the field studies suggested that substrate modulus also affect the critical strain needed to debond biofilms. To sum up, both the laboratory and the field studies proved that dynamic surface deformation approach can effectively detach various biofilms and barnacles, and therefore offers a non-toxic and environmental friendly approach for biofouling management.</p><p>Deformable elastomer systems used in our studies are easy to fabricate and can be used as complementary approach for existing commercial strategies for biofouling control. To this end, we aimed towards developed proactive multifunctional surfaces and proposed two different approaches: (i) modification of elastomers with antifouling polymers to produce multifunctional, and (ii) incorporation of silicone-oil additives into the elastomer to enhance fouling-release performance.</p><p>In approach (i), we modified poly(vinylmethylsiloxane) elastomer surfaces with zwitterionic polymers using thiol-ene click chemistry and controlled free radical polymerization. These surfaces exhibited both fouling resistance and triggered fouling-release functionalities. The zwitterionic polymers exhibited fouling resistance over short-term (∼hours) exposure to bacteria and barnacle cyprids. The biofilms that eventually accumulated over prolonged-exposure (∼days) were easily detached by applying mechanical strain to the elastomer substrate. In approach (ii), we incorporated silicone-oil additives in deformable elastomer and studied synergistic effect of silicone-oils and surface strain on barnacle detachment. We hypothesized that incorporation of silicone-oil additive reduces the amount of surface strain needed to detach barnacles. Our experimental results supported the above hypothesis and suggested that surface-action of silicone-oils plays a major role in decreasing the strain needed to detach barnacles. Further, we also examined the effect of change in substrate modulus and showed that stiffer substrates require lower amount of strain to detach barnacles.</p><p>In summary, this study shows that (1) dynamic surface deformation can be used as an effective, environmental friendly approach for biofouling control (2) stretchable elastomer surfaces modified with anti-fouling polymers provides a pro-active, dual-mode approach for biofouling control, and (3) incorporation of silicone-oils additives into stretchable elastomers improves the fouling-release performance of dynamic surface deformation technology. Dynamic surface deformation by itself and as a supplementary approach can be utilized biofouling management in biomedical, industrial and marine applications.</p> / Dissertation

Thesis (Ph.D. in Pharmaceutical Sciences) -- University of Colorado Denver, 2007. / Typescript. Includes bibliographical references (leaves 133-143). Online version available via ProQuest Digital Dissertations.

Le contrôle des procédés représente un enjeu majeur pour les industries chimiques et pétrochimiques afin de garantir la qualité des produits, le contrôle des coûts, le maintien de la productivité et la maîtrise des risques. L'analyse menée directement au coeur des procédés constitue la voie la plus efficace. Cependant, dans la majorité des applications, les analyses élémentaires sont réalisées essentiellement en laboratoire et très rarement en ligne, par la mise en oeuvre de différentes technologies, le plus souvent lourdes et onéreuses. Ce travail de thèse s'inscrit dans le cadre d'un grand projet d'innovation qui couvre le champ de l'analyse élémentaire en ligne, domaine actuellement peu étudié. La technique d'analyse retenue est la spectrométrie LIBS en raison de sa rapidité et de son application à tout état de la matière sans préparation d'échantillon, ce qui lui offre un fort potentiel pour l'analyse en ligne. Cette technique est investiguée afin de réaliser des analyses en ligne d'éléments présents dans des matrices liquides : saumures, huiles silicone et produits pétroliers. L'optimisation des différents paramètres de mesure est réalisée et une approche d'optimisation s'appuyant sur un plan d'expériences est proposée. Différents modes d'échantillonnage de liquide et plusieurs montages LIBS sont étudiés afin de répondre aux problématiques évoquées. Enfin, une transposition au monde industriel est présentée avec le suivi du soufre en ligne dans des produits pétroliers sur un pilote industriel. Les résultats sont encourageants, mais la stabilité perfectible des mesures dans le temps implique d'explorer de nouvelles pistes d'amélioration / Process control is a major challenge for chemical and petrochemical industries so as to ensure product quality, cost control, sustainable productivity and risk management. To do so, carrying out the analysis directly at the core of the process is the most efficient way. However, for most applications, elemental analyzes are mainly performed in the laboratory and rarely on-line, which requires the implementation of different technologies, usually complex and expensive. This work is part of a large innovative project that covers the field of on-line elemental analysis, a research area still understudied to this day. The analytical technique selected here is the Laser Induced Breakdown Spectroscopy. Indeed, its speed and its capability to analyze all states of matter without sample preparation, gives it a great potential for on-line analysis. This technique is investigated in order to achieve on-line analysis of elements contained in various liquid matrices: brines, silicone oils and petroleum products. The optimization of different measurement parameters is performed, including an experimental design based approach. Different liquid sampling configurations and several LIBS setups are designed in order to tackle the issues encountered. Finally, a transposition to the industrial world is presented through on-line monitoring of sulfur in petroleum products on an industrial pilot process. The results are promising, but improving the stability of measurements over time still requires further research