This thesis describes the design of a multifunctional three-storey house. The proposal includes the choice of the structural system, the choice of walls, windows, designing footings, staircases, numerous parking areas, flat roof drainage, management of rainwater. The specialized section is designed ventilating buildings with VRF systems heating / cooling with heat pumping. A check is a calculation of bearing capacity of ceiling construction.

The subject of this thesis is the construction and maintenance of project documentation for the implementation of the multipurpose building in Jihlava. Designed building is located in the southern town of Jihlava, in the slightly hilly terrain on the west side. The house is rectangular ground plan, with a projecting portion bowling lanes. Roofing form a single-slope roof. It is a multifunctional building, the first floor consists of a restaurant with bowling lanes in the second and third floor houses the Tax Office. They used conventional and traditional building materials. The thesis also specializing on the subject of air conditioning and heating.

This is a detached multifunctional building in the construction of commercial and residential buildings. The building is located in České Budějovice. Multifunctional building has five floors, one underground floor and a partial basement. The building is covered single-surface vegetation and double skin roof rack. On the first floor is a multifunctional building with reception vestibule, hall of which are accessible to all businesses and also the staircase space. The first floor is also a cafe, spatially separated from the multifunctional building. The café includes restrooms and stairs to get to the hinterland own cafe, where there is room for staff, toilet and are relevant warehouses drinks and other amenities. On the second floor there is a fitness center with all facilities and sanitary facilities. The gym also includes a reception and a health food store. In the third to fifth floor are residential units. A total of 5 apartments, where 2 and 3 flats are always identical. The building is based on foundation strips of plain concrete and masonry made of POROTHERM building system with a contact system of the company ISOVER. The project has been prepared complete documentation of new multifunctional building at the level of documentation for construction. Design of the building emphasizes the static and layout, fire safety, energy savings and safety in use. Drawing documentation was realized in ArchiCAD.

The subject of this thesis is newly built multifunctional building that will be built in Brno. The part of Brno is called Sadová. The building will have five floors above ground and one underground floor. The underground floors will be used for car parking. The first floor will be located several shops. It will be hairdresser, florist's, supermarket and a cafeteria. Between the second and the fifth floor will be dwelling units. There will be 14 dwelling units with an area > 100 m2 and 8 dwelling units with an area

The diploma thesis is based on design of a multifunctional building in Lazany. The object is situated in a build-up area. There is the patisserie and the grocery on the first floor. There is six flats on the second and the third floor. The building has three floors without a cellar. There is a parking for customers and tenantry of building. The object is based on the footings of plaint concrete and it is used the building system POROTHERM. The ceilings are made of ceiling panels SPIROLL and the roof is flat.

The diploma thesis is focused on project documentation of Meat packing plant. Along with meat processing the documentation solve question of accomodation for employees. Building consists of two main sections: The processing – it is structured under requierements of meat packing industry. Second one is residential part set in 2nd, 3rd and 4th floor. Main inspiration for design are meat packing plants in Scandinavian countries, where is often need to provide accomodation to employess because of disadvantageous geographic locality. Building is built of Heluz building system, perimeter walls consists of insulation filled blocks. Building is without basement and it is based on footings of plaint. The roof is flat, partially designed as extensive green roof. Isover system is used to thermal insulation. A part of object is also asphalted plain for transport goods to and from the meat packing plant.

The master’s thesis deals with design documentation of a multifunctional building in Vyskov. The property consists of eight apartments, shops and offices. It is a detached, three-storey building without a basement. Parking space is solved by parking in front of the building. The shape in plan consists of three rectangles with a flat roof. The house is fitted to almost flat terrain. The main entrances to the building are situated to the north, west, northwest. The building is designed from the structural system POROTHERM.

The dissertation contains the project and working out of the designing documentation for execution of a multifunctional building. The project deals with a new multifunctional building in the marginal part of the Olomouc city. The object is a brick building with no cellar and four above-ground floors. The ground plan of the building is regular and mainly rectangular. There are balconies at the corner and in the middle of the eastern part of building in above-ground floors. The last floor is partially receding and there are two terraces here. There is the flat roof construction. The horizontal and vertical supporting and non-supporting constructions are suggested from the Heluz´s brick system. There are three places of business on the ground floor and ten flats on the above-ground floors. The building site has a plane terrain.

The subject of the diploma thesis is the elaboration of the technological project of the multifunctional building DASS in Martin. It is a two-storey building that will serve for the needs of DASS company. The diploma thesis assesses the building as a whole and focuses on selected technological processes. The work consists of the technical report, study of the implementation of the main technological stages of the main building, technological regulations for monolithic reinforced concrete horizontal structures and for vegetation flat roof, design of main construction machines and mechanisms, design and assessment of lifting mechanism and control-test plans for structures from technological regulations. Furthermore, a time and financial plan is developed. Than staff balance and a schedule of selected technological processes of the main building is processed. At the same time a construction site project, a health and safety plan, a noise study and LEED 2009 CORE & SHELL are prepared for the construction of a multifunctional building. The work is further supplemented by a specialization focused on the analysis of the contribution of green roofs on energy efficiency of buildings.

The master’s thesis solves the design and creation of project documentation for the construction of new multifunctional building on parcel 399/30 in the cadastral area Uherské Hradiště - Mařatice. This building plot is intended for construction and is owned by the town of Uherské Hradiště. The location is located in close proximity to the block of flats Pod Svahy. The enclosed building documentation is made in accordance with applicable laws, decrees and standards. Designed multifunctional house is a multipurpose building with one underground and five above ground floors. Basement areas serve as collective garages and backroom areas for residential units. The first floor has a commercial use with cafes, design offices, copy center and a hairdresser. Other above ground floors serve as permanent accommodation in the form of thirteen residential units. A reinforced concrete monolithic skeleton is designed as a support system. The roof is made in the form of a flat roof. The object is based on a base plate.