The thesis “Multifunctional building in Tábor” is processed in the form of project documentation which comprises of all the requisites required by current regulations. Designed multifunctional building is placed at the site number 1475/1 in Tábor. The building has four floors. There are 18 flats and 4 commercial premises in the facility. Constructional system is made of lime-sand bricks, prestressed concrete ceiling panels, flat roof. Building has a contact thermal insulation system.

The aim of this diploma thesis is design of multifunctional building in the town Zábřeh in dis-trict Šumperk. The house is no basement. It is divided into two operating parts – commercial space and residential space. The building has four floors. Vertical supporting structure are formed by ceramic system Porotherm, horizontal supporting structures are formed by ceramic inserts Porotherm. The building is covered with a flat roof.

The thesis deals with project documentation of a newly constructed multifunctional building in municipality Oslavany. The multifunctional building is independently standing and it is located on the flat terrain on the right bank of Oslava river. The building is of e cuboid shape with flat roof and one recessed floor. It is two-storey building without basement. On the 1st floor there is a rehabilitation center, cafeteria and facilities for flats that are placed on the 2nd floor. The part of the 1st floor is also the manager’s apartment and technology space. On the 2nd floor there are situated 7 apartments with shared outside terrace. Structural system is masonry with bidirectional support system. For construction will be used brick technology. Building has the flat roof. The staircase is straight, two flights of stairs with landing, monolithic. Foundation constructions are designed as areal, strip footings are rectangular made from plain concrete, monolithic.

Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.

This diploma thesis deals with analysis of multifunctional building efficiency investment. The theoretical part describes investments and investment space, building life cycle, financing options and evaluation methods of efficiency investment. The practical part is focused on specific contract efficiency realized in Prague. Cash flow is created and payback time is counted for the individual scenarios. Net present value and internal rate of return serve as alternative indicators of efficiency investment.

The subject of this thesis is to design a multifunctional building. The building object is located on the southeast outskirts of Brno, in the city of Slatina. The land chosen for the building is situated in the cadastral area of Slatina. The building has five floors without basement. Multifunctional house is suitable for housing and for commercial purposes. The house is projected with 13 apartments, with café – opening hours to 10 PM, healthy food store and drugstore. There are apartments with 1 bedroom, 2 bedrooms and 3 bedrooms. Each apartment is complemented by a balcony and a cellar. The main facade is located on the west side of the property where it is allowed access to the shops and cafe. Entry into the living area is on the eastern side of the property. Perimeter walls of the building will be made of sand-lime bricks KM Beta SENDWIX 5DF-LP. The ceilings are designed as monolithic. The house is covered by a flat single-roof, part of the roof over the 4th floor will be designed as a vegetation roof.

The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up

This master thesis deals with study of area, which is intended for construction of apartments building and public facilities. Four building are projected with visually connection by a covered parking place. There are three apartments building and one multifunctional building. The aim of this master thesis is elaboration of project documentation for the implementation of new multifunctional house in the area of the city Uherský Brod. In the first floor is designed café, which has its own entrance. In the second part of the floor is household equipment and utility room, which also has a separate entrance from outside. In the second to fourth floor is ten housing units of different sizes. The object is located on a gently sloping land in the northern part of Uherský Brod in the new city district called “Nad Zámkem”. Wall construction is designed from Porotherm elements. Ceiling construction is monolithic reinforced concrete. Roofing is solved by single-flat roof. The drawing part of this master thesis is processed in AutoCAD.

The subject of this diploma thesis is the design of multifunctional building in Brno, in Cimburkova street. The building is placed on flat terrain and it has four floors. Floor plan of multifunctional building is rectangle shaped. There are three different establishments in this building. Most of space of ground floor and first floor is used as parking. Rest of space of ground floor and second floor is used as café, hairdresser and store. There are eight separate offices and sanitary facilities, break rooms, storages and servers. The supporting construction of building is made of reinforced concrete column system and ceiling slabs. The building is based on reinforced concrete slab and than there is a flat roof above the building.

The diploma thesis deals with the new construction of a multifunctional building in Uherský Brod. The building is located in row houses development as an end house, in the central part of city Uherský Brod. The building is designed as a three-storey with partial basement. In the basement floor a parking slot and a technical facilities will be situated. The multifunctional building will serve as a fitness equipment store and repair shop it and will contain office premises, an e-shop dispensing, sanitary facilities and other house facilities. The structural system of a bulding is designed as a transversal, a constructural system as wall system in combination with columns. The construction technology is masonry system in combination with monolithic columns and ceilings. The vertical load-bearing structures will be built of ground clay bricks. The horizontal load-bearing structures will be reinforced concrete cast-in-placed. The roofs will be built as warm flated, partly as walkable terraces. The staircase is designed as straight, half-turn stairs with a landing, cast-in-place. There is an elevator designed in the mirror staircase. The foundation structures are designed as flat, cast-in-place concrete strip footings. The purpose and functional use of the multifunctional building are designed with regard to people with reduced mobility or orientation. The building is designed as a building with almost zero energy consumption.