Yes / Glioblastoma (GBM) has a dismal prognosis. Evidence from preclinical tumor models and human trials indicates the role of GBM initiating cells (GIC) in GBM drug resistance. Here, we propose a new treatment option with tumor enzyme-activatable, combined therapeutic and diagnostic (theranostic) nanoparticles, which caused specific toxicity against GBM tumor cells and GICs. The theranostic cross-linked iron oxide nanoparticles (CLIO) were conjugated to a highly potent vascular disrupting agent (ICT) and secured with a matrix-metalloproteinase (MMP-14) cleavable peptide. Treatment with CLIO-ICT disrupted tumor vasculature of MMP-14 expressing GBM, induced GIC apoptosis and significantly impaired tumor growth. In addition, the iron core of CLIO-ICT enabled in vivo drug tracking with MR imaging. Treatment with CLIO-ICT plus temozolomide achieved tumor remission and significantly increased survival of human GBM bearing mice by more than 2 fold compared to treatment with temozolomide alone. Thus, we present a novel therapeutic strategy with significant impact on survival and great potential for clinical translation. / Heike E Daldrup-Link, NIH, R21CA176519 and R21CA190196; Sanjiv Sam Gambhir, NIH, 1U54CA199075; Jessica Klockow, NCI training grant, T32CA118681, Robert A. Falconer, University of Bradford, UoB-66031

Surface plasmon resonance has become a widely investigated phenomenon in the past few years. Initially descriptive of light interactions with metallic films, research has branched out to encompass the nanoparticles as well. Generation of the maximum surface plasmon resonance for nanostructures is based on the resonance condition that the oscillatory behavior of the 'free' electrons on the surface of the particle become equivalent to the frequency of the excitation light; for films this required a specific geometry. Metallic nanoparticles have also interested researchers because of their unique optical properties. Depending on the metal, observations of quenching as well as fluorescence enhancement have been reported. Based on the phenomenon of surface plasmon resonance as well as the properties of metallic nanoparticles, this research reports the interaction of gold and silver nanoparticles in an aqueous dye solution. Our research is the basis for developing an optical sensor used for water treatment centers as an alarm mechanism. Due to the inefficiency of the fluorophore used in similar optodes, sufficient fluorescence was not obtained. With the addition of the nanoparticles, we hoped to observe the transfer of energy from the nanoparticle to the fluorophore to increase the overall intensity, thereby creating a sufficient signal. Using the excitation theories discovered by Raman, Mie, and Forster and Dexter as our foundation, we mixed a strongly fluorescent dye with gold nanoparticles and aagain with silver nanoparticles. After taken measurements via fluorescence spectroscopy, absorption spectroscopy, and photoluminescence excitation, we observed that the silver nanoparticles seemed to enhance the fluorescence of the dye while the gold nanoparticles quenched the fluorescence. / Master of Science

An experimental investigation was conducted to evaluate the possible use of highly-charged spherical nanoparticles to stabilize an aqueous dispersion of weakly-charged microspheres. At low pH values, the surface of silica is weakly charged, which leads to flocculation of colloidal suspensions of silica microspheres. Binary solutions of weakly charged silica microspheres and highly charged polystyrene latex nanoparticles result in adsorption of the nanoparticles onto the surface of the silica microspheres. This effectively "recharges" the silica spheres, with effective zeta potentials increased to the range that is unfavorable for flocculation of microspheres in a silica-only solution. However, this does not guarantee stability, and comparisons between positively charged amidine latex nanoparticles and negatively charged sulfate latex nanoparticles indicate that the degree of coverage plays an important role in the restabilization. The sulfate latex nanoparticles do not cover the surface sufficiently, and though they seemingly provide sufficient charge, the weakly charged patches of the exposed silica substrate can lead to flocculation. The amidine latex nanoparticles, on the other hand, cover the surface more completely, and effectively prevent flocculation of the silica microspheres. The mechanisms responsible for this different adsorption and stabilizing behavior are not entirely understood, as both the amidine and sulfate latex nanoparticles are of similar size and the magnitude of the zeta potentials of the different particle types are comparable. / Master of Science

The optical and chemical properties of the materials used in catalytic and sensing applications directly determine the characteristics of the resultant catalyst or sensor. It is well known that a catalyst needs to have high activity, selectivity, and stability to be viable in an industrial setting. The hydrogenation activity of palladium catalysts is known to be excellent, but the industrial applications are limited by the cost of obtaining catalyst in amounts large enough to make their use economical. As a result, alloying palladium with a cheaper, more widely available metal while maintaining the high catalytic activity seen in monometallic catalysts is, therefore, an attractive option. Similarly, the optical properties of nanoscale materials used for sensing must be attuned to their application. By adjusting the shape and composition of nanoparticles used in such applications, very fine changes can be made to the frequency of light that they absorb most efficiently. The design, synthesis, and characterization of (i) size controlled monometallic palladium nanoparticles for catalytic applications, (ii) nickel-palladium bimetallic nanoparticles and (iii) silver-palladium nanoparticles with applications in drug detection and biosensing through surface plasmon resonance, respectively, will be discussed. The composition, size, and shape of the nanoparticles formed were controlled through the use of wet chemistry techniques. After synthesis, the nanoparticles were analyzed using physical and chemical characterization techniques such as X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and Scanning Transmission Electron Microscopy- Energy-Dispersive Spectrometry (STEM-EDX). The Pd and Ni-Pd nanoparticles were then supported on silica for catalytic testing using mass spectrometry. The optical properties of the Ag-Pd nanoparticles in suspension were further investigated using ultraviolet-visible spectrometry (UV-Vis). Monometallic palladium particles have been synthesized and characterized to establish the effects of nanoparticle size on catalytic activity in methanol decomposition. The physicochemical properties of the synthesized palladium-nickel nanoparticles will be discussed, as a function of the synthesis parameters. The optical characteristics of the Ag and Pd nanoparticles will be determined, with a view toward tuning the response of the nanoparticles for incorporation in sensors. Analysis of the monometallic palladium particles revealed a dependence of syngas production on nanoparticle size. The peak and steady state TOFs increased roughly linearly with the average nanoparticle diameter. The amount of coke deposited on the particle surfaces was found to be independent on the size of the nanoparticles. Shape control of the nickel-palladium nanoparticles with a high selectivity for (100) and (110) facets (≤ 80%) has been demonstrated. The resulting alloy nanoparticles were found to have homogeneous composition throughout their volume and maintain FCC crystal structure. Substitution of Ni atoms in the Pd lattice at a 1:3 molar ratio was found to induce lattice strains of ~1%. The Ag nanocubes synthesized exhibited behavior very similar to literature values, when taken on their own, exhibiting a pair of distinct absorbance peaks at 350 nm and 455 nm. In physical mixtures with the Pd nanoparticles synthesized, their behavior showed that the peak position of the Ag nanocubes' absorbance in UV-Vis could be tuned based on the relative proportions of the Ag and Pd nanoparticles present in the suspension analysed. The Ag polyhedra synthesized for comparison showed a broad doublet peak throughout the majority of the visible range before testing as a component in a physical mixture with the Pd nanoparticles. The addition of Pd nanoparticles to form a physical mixture resulted in some damping of the doublet peak observed as well as a corresponding shift in the baseline absorbance proportional to the amount of Pd added to the mixture.

Recent advances in nanotechnology have led to the production of materials with nanoscale dimensions (nm) and properties distinctly different from their bulk (>100 nm) counterparts. With increased use, it is inevitable that nanomaterials will accumulate in the environment and there is concern that the novel properties of nanomaterials could result in detrimental environmental and human health effects. In particular, there has been concern recently regarding the use of silver (Ag) based nanomaterials as antimicrobial agents in consumer and medical products. Current regulations dealing with the discharge of metals into the environment are based on total concentrations with no consideration for the form (e.g., ionic, nanoparticle, colloid) which can largely determine toxicity. Methods for the identification and characterization of nanoparticulates within complex matrices are lacking and the development of robust methods for this purpose are considered a high priority research area. This research focuses on the development and application of a novel method for characterizing Ag manufactured nanoparticles (MNPs) within terrestrial environments, in particular in soil pore water, with applications relevant to other metal MNPs as well. The method was then applied to understand the dynamics and behavior of Ag MNPs in soil and soil amended with sewage sludge biosolids.

One of the important dynamic parameter characterizing the properties of polymer nanocomposite is viscosity. It is a quantity of interest on macroscopic scale also. A thorough study of viscosity in case of polymer nanocomposite has not been carried out in the existing literature. In this work we used atomic force microscope, force-distance spectroscopy to experimentally measure the viscosity of polymer and polymer nanocomposite thin films. In particular we try to tune viscosity by changing the nature of interface of polymer grafted nanoparticle and polymer melt. The interface nature in varied by changing the miscibility parameter ( f ), defined as the ratio of grafted chain length to the matrix chain length. Using coarse-grained molecular dynamic simulations, dynamics at the nanoparticle-matrix interface is explored by calculating slip length and mobility at the interface. Equilibrium molecular dynamic simulation is employed to calculate the viscosity of nanocomposite. Chapter 1 We introduce some basic models for polymer chain conformation and dynamics. The known facts about the structural and dynamics of polymer grafted nanoparticle are also described. Chapter 2 We present our experiment method and results for various nanocomposite systems for two different volume fractions of nanoparticles and for two different thicknesses. We show that introduction of nanoparticles causes reduction in viscosity of thin film with respect to the neat polymer films. Further for the low volume fraction system (0:5%) the extent of reduction decreases with increasing f -value and almost matching the neat system at the highest f . At high volume fraction (1%), for lower f we observe a reduction in viscosity and for highest f surprisingly there is an increase in viscosity of nanocomposite with respect to the neat system with a cross-over for intermediate f . We attribute the effects to possible slip at the nanoparticle-matrix interface. A rough estimation of slip length from the measured value of viscosity of nanocomposite and pure polymer is provided which strongly supports our idea of slip at the interface Chapter 3 Briefly discusses some basic aspects of molecular dynamic simulation. Chapter 4 Using MD simulation we calculate the slip-length at the grafted nanoparticle-matrix interface for various systems with different f values. A spherical core grafted with atoms same as the matrix is kept fixed at the canter of simulation box. The particle is rotated for calculating slip length. We also look at the mobility variation of matrix chains as a function of radial distance from the centre of nanoparticle. From both slip-length and mobility calculation we observe that slip length as well as mobility is higher for lower f systems as compared to higher f thus supporting our assertion of slip as the most likely cause for our experimental observations. Chapter 5 Now instead of single grafted nanoparticle we have multiple nanoparticles which are free to move in the matrix. Using Green-Kubo formalism we calculate the equilibrium viscosity for pure polymer and nanocomposite systems from MD simulations. We observe increase in viscosity for nanocomposite system as compared to the pure polymer system. We also look at various structural and dynamical changes, that occurs in the filled system with respect to neat system, that leads to such increase in viscosity.

Carbon nanotubes (CNTs) and gold nanoparticles (AuNPs) are widely used for sensing applications due to their distinctive electrical and optical properties, and we have explored the development of methods that enable the incorporation of these nanomaterials into new and improved sensing devices. As a means for fabricating simple, low-cost and fast detection platforms for various applications, we have developed paper-based electrochemical detection platforms based on CNTs or platinum nanoparticle (PtNP)-CNT composite materials. We describe the use of a paper-based, low density, a three-dimensional thin film of interconnected CNTs as an electrode material. We studied the electrochemical properties of these paper-based CNT electrodes and demonstrated their use as an electrochemical sensor for the sensitive detection of guanine-based nucleotides. We further describe the functionalization of this paper-based electrode by fabricating a PtNP-SWCNT hybrid film via a vacuum filtration-based method. The interconnected PtNP structure formed on top of the CNT-coated paper was directly used as an electrocatalyst for methanol oxidation. Compared to paper-based PtNP-SWCNT hybrid films formed by electrochemical deposition, hybrid films formed by vacuum filtration showed a higher electrochemical surface area and enhanced electrocatalytic response to methanol oxidation. We have also developed methods based around DNA-modified AuNPs, which offer an excellent colorimetric platform for target detection. The DNA density on the surface of modified AuNPs affects enzymatic activity, colloidal stability of AuNPs, the orientation of the probe DNA and its hybridization efficiency. The combination of all these factors ultimately dictates the reaction time and sensitivity of colorimetric assays. We demonstrate the use of DTT as a modulator to control DNA surface coverage on the surface of AuNPs. Using this DTT treatment and a novel probe for exonuclease III activity, we have developed a colorimetric assay based on DTT-treated, DNA-modified AuNPs that can achieve more sensitive and rapid detection of DNA and enzymes relative to existing sensor platforms.

No description available.

No description available.

Form, mobility, toxicity and the eventual fate of engineered nanomaterials in environmental ecosystems are currently not well defined and are needed to improve risk assessment and legislation. The present study subjected uncoated zinc oxide (ZnO) nanoparticles (30nm and 200nm) and coated silver (Ag) nanoparticles (Paraffin: 3-8nm and citrate/PVP: 50nm) to different ionic strength media and different types of algal/bacterial extracellular-polymeric species (EPS) at long (6 months) and short (2 weeks) timescales. Changes in particle size distribution and stability were examined using a multi-method approach. Sample concentration and sample polydispersity are important factors when selecting techniques. Uncoated ZnO nanoparticles aggregated heavily in water at high concentrations (1000mg/L). However silver nanoparticles (1-10mg/L) remained stable at all ionic strengths and EPS in this study due to the steric component of their coatings. Nano-toxicological experiments involving cyanobacteria S.leopoliensis and green algae C.reinhardtii showed size-dependent toxicity from coated nanosilver particles. Smaller nanoparticles (3-8nm) showed greater dissolution over 72h and greater toxicity to both species than 50nm particles indicating silver ions are an important toxicity mechanism. Nanoparticle coatings were likely important in controlling dissolution levels. Cell viability and production of reactive oxygen species (ROS) were shown to be important mechanisms of toxicity to phycological species. Species specific effects were noted for both silver nanoparticles. EPS from S.leopoliensis were noted to remove ionic silver from suspension and different types of C.reinhardtii EPS were produced when particles underwent different levels of toxic stress indicating that EPS could both affect particle toxicity and be affected by it. This work has demonstrated that coated nanoparticles could remain stable under various ionic strengths and with exposure to algal organic matter for timescales up to 6 months. This could result in adverse effects to aquatic organisms were they to reach environmental systems and is of concern to nanomaterial risk assessors.