This thesis details the development of a novel photovoltaic device based on organometal halide perovskites. The initial focus of this thesis begins with the study of lighttrapping strategies in solid-state dye-sensitised solar cells (detailed in chapter 3). While I report enhancement in device performance through the application of near and far-field light-trapping techniques, I find that improvements remain step-wise due to fundamental limitations currently employed in dye-sensitised solar cell technology— notably, the available light-sensitising materials. I found a promising yet under researched family of materials in the methyl ammonium tri-halide plumbate perovskite (detailed in chapter 4). The perovskite light-sensitiser was applied to the traditional mesoscopic sensitised solar cell device architecture as a replacement to conventional dye yielding world-record breaking photo-conversion e!ciencies for solid-state sensitised solar cells as high as 8.5%. The system was further developed leading to the conception of a novel device architecture, termed the mesoporous superstructured solar cell (MSSC), this new architecture replaces the conventional mesoporous titanium dioxide semiconductor with a porous insulating oxide in aluminium oxide, resulting in very low fundamental losses evidenced through high photo-generated open-circuit voltages of over 1.1 V. This development has delivered striking photo-conversion ef- ficiencies of 10.9% (detailed in chapter 6).

This thesis is concerned with studying the fascinating quantum properties of real-world nanostructures embedded in a noisy condensed matter environment. The interaction with light is used for controlling and manipulating the quantum state of the systems considered here. In some instances, laser pulses also provide a way of actively probing and controlling environmental interactions. The first two research chapters assess two different ways of performing all-optical spin qubit gates in self-assembled quantum dots. The principal conclusion is that an `adiabatic' control technique holds the promise of achieving a high fidelity when all primary sources of decoherence are taken into account. In the next chapter, it is shown that an optically driven quantum dot exciton interacting with the phonons of the surrounding lattice acts as a heat pump. Further, a model is developed which predicts the temperature-dependent damping of Rabi oscillations caused by bulk phonons, finding an excellent agreement with experimental data. A different system is studied in the following chapter: two electron spin qubits with no direct interaction, yet both exchange-coupled to an optically active mediator spin. The results of this study show that these general assumptions are sufficient for generating controlled electron spin entanglement over a wide range of parameters, even in the presence of noise. Finally, the Radical Pair model of the avian compass is investigated in the light of recent experimental results, leading to the surprising prediction that the electron spin coherence time in this molecular system seems to approach the millisecond timescale.

Experimental investigations of the optical properties of GaN nanostructured light emitting diode (LED) arrays are presented. Microphotoluminescence spectroscopy with pulsed and continuous wave lasers was used to probe the carrier dynamics and emission mechanisms of nanorod LED arrays fabricated by a top down etching method. Results show a possible reduction in internal electric field as nanorod diameter decreases. Localisation effects were also observed, affecting the spectral shape of the nanorod emission. Under two-photon excitation, quantum dot-like sharp spectral peaks in the PL spectra are found to exist in abundance amongst all the nanorod samples. The optical properties of these localised states, which are shown to be associated with the nanorod free-surfaces, are characterised using non-linear and time resolved spectroscopy. An investigation into spatially resolved single nanorods was also carried out. Single nanorods were isolated, and characterised using pulsed lasers. The etching is shown to increase the carrier decay life-time at extended intervals over several hundred ns. The temporal evolution and excitation power density dependence of the quantum dot-like states are also presented for the first time. The long lived localised states are thought to arise from surface effects, in particular Fermi-surface pinning, causing localisation and spatial separation of carriers. Additional work on nano-pyramid array LEDs, with quantum wells on semi-polar surfaces is also presented. Optical properties using micro-photoluminescence are compared to cathodoluminescence studies. An uneven distribution of emission wavelengths across the pyramid facet is thought to lead to an emission mechanism involving carriers transferring between multiple spatially localised states. Finally, experimental techniques and fabrication methods for future work are documented in detail.

The aim of this thesis is to develop a deeper understanding and the technology in the nascent field of solid-state organic-inorganic perovskite solar cells. In recent years, perovskite materials have emerged as a low-cost, thin-film technology with efficiencies exceeding 16% challenging the quasi-paradigm that high efficiency photovoltaics must come at high costs. This thesis investigates perovskite solar cells in more detail with a focus on incorporating plasmonic nanostructures and perovskite film formation. Chapter 1 motivates the present work further followed by Chapter 2 which offers a brief background for solar cell fabrication and characterisation, perovskites in general, perovskite solar cells in specific, and plasmonics. Chapter 3 presents the field of plasmonics including simulation methods for various core-shell nanostructures such as gold-silica and silver-titania nanoparticles. The following Chapters 4 and 5 analyze plasmonic core-shell metal-dielectric nanoparticles embedded in perovskite solar cells. It is shown that using gold@silica or silver@titania NPs results in enhanced photocurrent and thus increased efficiency. After photoluminescence studies, this effect was attributed to an unexpected phenomenon in solar cells in which a lowered exciton binding energy generates a higher fraction of free charge. Embedding thermally unstable silver NPs required a low-temperature fabrication method which would not melt the Ag NPs. This work offers a new general direction for temperature sensitive elements. In Chapters 6 and 7, perovskite film formation is studied. Chapter 6 shows the existence of a previously unknown crystalline precursor state and an improved surface coverage by introducing a ramped annealing procedure. Based on this, Chapter 7 investigates different perovskite annealing protocols. The main finding was that an additional 130°C flash annealing step changed the film crystallinity dramatically and yielded a higher orientation of the perovskite crystals. The according solar cells showed an increased photocurrent attributed to a decrease in charge carrier recombination at the grain boundaries. Chapter 8 presents on-going work showing noteworthy first results for silica scaffolds, and layered, 2D perovskite structures for application in solar cells.