This thesis deals with the structural design dividing equipment for producing blanks for forging. Its contents are designed technological, structural design, design and check calculations needed for the actual construction of the dividing device. The conclusion of the work dealt with a dangerous place for the operation and maintenance of the machines by analyzing significant hazards. The result is the structural design of machine parts according to the assignment.

This diploma thesis deals with analysis of cost planning in company Gebauer a Griller Kabeltechnik, spol s r.o. for third quartal of chosen cost centre. There are described all calculations and final cost plan is compared with actual data. On base of this are proposed recommendations for optimization of cost planning and elimination of deviations.

An analog multiplier are circuits, that are realized multiplication of two analog signals. They can be made by suitable connection (according to function) discreet parts. Nowadays there are integrated circuits in advance function, whose internal structure is made by complex of circuits with operating ampfliers and other circuits. These circuits have a very high accuracy of arithmetic operation which is mostly better than 1%. The analog multiplier are used in situation, when we need realize multiplication, division, exponentation, square root extraction and logarithmic calculation of analog signals. In the next are used in circuits for multiplication of frequency, shifting of frequency, amplitude modulation, detection phase angel of two signals with the same frequency, etc. The AD538 is a monolithic real-time computational circuit that provides precision analog multiplication, division and exponentiation. The combination of low input and output offset voltages and excellent linearity results in accurate computation over an unusually wide input dynamic range.

Thesis subject is a project documentation as a proposal of spiral roundabout replacing current luminous controlled transverse crossing. In the proposal is designed foot - path, cycling transport and stops for public transport. Vehicles will be rectified by the help of protective, divisive islets. We also measured actual traffic flow intensity. Current and newly designed state is modelled with using of programme Aimsun, where we validate proposed solution.

This thesis investigates the design documentation of the proposal to amend the existing confusing intersection of contact on the contact rectifying junction with traffic or roundabout. The proposal is designed communications for pedestrians and bus stops. Vehicular traffic will be channeled through the protective, dividing island.

This dissertation thesis is focused on explaining the broad issue of the non-conventional machining by an abrasive water jet. Introductory chapters deal with various techniques and methods of water-jet cutting and analyze them. Then the following text provides us with a detailed description of the machine itself so that people can understand the way how this technology works. The third chapter is focused on the quality of the resulting surface and the possibility of affecting it by technological parameters. This part is connected with the practical part of my thesis, in which the resultant surfaces of various materials made by different cutting parameters were compared. Subsequent section outlines the development of this technology. The last chapter contains technical and economic evaluation.

This thesis deals with the structural design dividing equipment for producing blanks for forging. Its contents are designed technological, structural design, design and check calculations needed for the actual construction of the dividing device. The conclusion of the work dealt with a dangerous place for the operation and maintenance of the machines by analyzing significant hazards. The result is the structural design of machine parts according to the assignment.

Made available in DSpace on 2014-12-17T15:55:07Z (GMT). No. of bitstreams: 1 SandraMLB.pdf: 485730 bytes, checksum: 2d9d8cd23c72f730b56737d606b11e82 (MD5) Previous issue date: 2006-08-30 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The rapid growth of the Brazilian cities in the latest years has brought a series of problems regarding housing policies and, therefore, the provision of dwellings for the low-income class people. Following the pattern of other capital cities, Natal has repeated the pattern of urbanization practiced in the country, which concentrates the low-income class inhabitants in specific zones of the city known as peripheries or even in a dwelling place for less-favored classes such as Felipe Camar?o, which is one of ten boroughs belonging to the western administrative zone, a region which has historically received less attention from the public administrators towards infrastructure investments. Based on those aspects, the general objective of this work is to investigate which main social-environmental alterations have resulted from the processes of urbanization and field occupation in that area. The specific objectives are concerned with verifying 1) the process of urbanization and the process of dividing urban soil from the 1960s; 2) the current configuration of the public spaces in the borough; 3) the process of the deprivation of the original landscape characteristics of Environmental Protection Zones; 4) the dynamics of land occupation which are predominant in dune areas; 5) the dynamics of land occupation which are predominant in mangrove areas; 6) and the destruction of green covering on the land with its consequent alteration of the local floristic pattern. The methodology consisted of in-loco visits; the application of questionnaires as community research; a survey of bibliography published by the organisms and institutions in charge of carrying out the city hall s environmental and housing policies; and descriptive statistics of the collected data. Concerning the pattern of occupation which is predominant in the borough, the treatment of space dispensed by the local dwellers has culminated in the emergence and consolidation of environmental alterations which are clearly different from common occurrence in both the building area represented by housing complexes and in the green areas represented by dunes and mangroves. The data show that there was the predominance of the irregular land occupation process over the official housing policy during the population settlement which contributed with a series of frequent and foreseeable problems in the dynamics of urbanization of poverty such as invasions and appropriations of land parcels, the beginning of irregular arrangement of streets, the formation of villages and slums, which are full of self-constructed housing units, and the occupation and degradation of susceptibly fragile environmental areas such as the dune slopes and the mangroves / O r?pido crescimento das cidades brasileiras nos ?ltimos anos trouxe uma s?rie de problemas relacionados com as pol?ticas de habita??o e conseq?entemente com a provis?o de habita??es para as classes de renda baixa. Seguindo o exemplo de outras capitais, Natal repetiu o modelo de urbaniza??o praticado no pa?s, concentrando as popula??es de baixa renda em zonas espec?ficas da cidade classificadas como periferias, ou lugar de habita??o das classes menos favorecidas como ocorre em Felipe Camar?o, um dos dez bairros que integram a zona administrativa oeste, regi?o que historicamente recebeu pouca aten??o por parte dos poderes p?blicos em termos de investimentos em infra-estrutura. Fundamentados nesses aspectos, o objetivo geral deste trabalho ? averiguar quais as principais altera??es s?cio-ambientais decorrentes do processo de urbaniza??o e ocupa??o na ?rea. Constituem-se os objetivos espec?ficos verificar: o processo de urbaniza??o e parcelamento do solo a partir de 1960; a configura??o atual dos espa?os p?blicos do bairro; o processo de descaracteriza??o das Zonas de Prote??o Ambiental; as din?micas de ocupa??o predominantes nas ?reas de dunas e de manguezal e a destrui??o da cobertura vegetal com conseq?ente altera??o do padr?o flor?stico local. A metodologia compreendeu: 1) visitas a campo; 2) aplica??o de question?rios pesquisa comunit?ria; 3) levantamento da bibliografia publicada pelos ?rg?os e institui??es encarregados de executar as pol?ticas de meio ambiente e habita??o no munic?pio; e 4) estat?stica descritiva dos dados coletados. No que se refere ao modelo de ocupa??o predominante no bairro, constatou-se que o tratamento dispensado pelos moradores ao espa?o culminou com o aparecimento e consolida??o de altera??es ambientais distintas de comum ocorr?ncia na ?rea edificada representada pelos conjuntos habitacionais e nas ?reas verdes representadas respectivamente pelas dunas e pelo mangue. Os dados demonstram que durante o povoamento, houve predomin?ncia do processo de ocupa??o irregular sobre a pol?tica oficial de habita??o, colaborando com uma s?rie de problemas freq?entes e previs?veis nas din?micas de urbaniza??o da pobreza como: invas?es e apropria??es de lotes; abertura de arruamentos irregulares; forma??o de vilas e favelas, repletas de unidades habitacionais auto-constru?das e ocupa??o e degrada??o de ?reas de fragilidade ambiental, como as encostas de dunas e os manguezais

Title: Analysis of methods used during the downhill skiing training Objectives: The aim of this thesis was to determine, if by using dividing alphabet at the beginning of downhill skiing lesson in young school age children will more children be able to ski by using parallel method than by using plough method. Methods: The main research method was the selective structure observing during the practical lesson of downhill skiing in young school age children. The succes of managing basic dexterity elements of downhill skiing by using parallel method or plough method was determined. These informations were completed by own opinion, literature, personal experiences with downhill skiing racing and downhill skiing training. The method of the research was direct observation of skiing skills in young school age children at Ski school in Kubova Huť. Results: The hypothesis was confirmed. The method of education with elements of parallel position of ski, including used dividing skiing alphabet at the beginning, is highly effective. Keywords: children, downhill skiing, ski, young school age, skiing style, parallel position, plough position, downhill skiing school, dividing skiing alphabet.

The subject of my Master’s thesis is the variant redevelopment of intersections I/56 and II/469 in Hlučín. Both interesections are situated nearby bus terminal. Extent of adjustment obstructs the object of former granary. There are checked spatial options for adjusting both existing intersections to the roundabouts. In the frame of variants, there is a different manner of solution of structural layout of both intersections, possibility of connection of bus terminal and transfer of pedestrian traffic across designed intersections. Part of Master’s thesis is traffic survey and capacity analysis of designed intersections.