Spelling suggestions: "subject:"circular""
1 |
An analytical and experimental investigation of the response of elliptical composite cylindersMeyers, Carol Ann 05 October 2007 (has links)
An analytical and experimental investigation of the response of composite cylinders of elliptical cross-section to axial compression and internal pressure loadings is discussed. Nine eight-ply graphite-epoxy elliptical cylinders, three layups for each of three cross sectional aspect ratios, are specifically examined. The lay-ups studied are a quasi-isotropic (±45/0/90)<sub>g</sub>, an axially-stiff (±45/0₂)<sub>g</sub>, and a circumferentially-stiff (±45/90₂)<sub>g</sub>. The elliptical cross sections studied are characterized by semi-minor axis (b) to semi-major axis (a) ratios of b/a = 0.70, 0.85, and 1.00 (circular). The cross sections are obtained by holding the semi-major axis constant for all cross sections, and only varying the semi-minor axis. The nominal semi-major axis for all specimens was 5.00 in. (127 mm), and all specimens were cut to the same length, which provided a length-to-radius ratio of 2.9 for the circular cylinders. For the elliptical cross section cylinders, the length to- radius ratios, L/R(s), ranged from two to slightly greater than six, where R(s) is the function describing the circumferential variation of the radius. A geometrically nonlinear special-purpose analysis, based on Donnell’s nonlinear shell equations, is developed to study the prebuckling responses of geometrically perfect cylinders. In this analysis the circumferentially-varying radius of curvature of the cylinder is expanded in a cosine series. While elliptical sections are studied here, it should be noted that such an expansion will accommodate any cross section with at least two axes of symmetry. The displacements are likewise expanded in a harmonic series using the Kantorovich method. The total potential energy, written in terms of the displacements, is then integrated over the circumferential coordinate. The variational process then yields the governing Euler-Lagrange equations and boundary conditions. This process has been automated using the symbolic manipulation package Mathematica ©. The resulting nonlinear ordinary differential equations are then integrated via the finite difference method. A geometrically nonlinear finite element analysis is also utilized to compare with the prebuckling solutions of the special-purpose analysis and to study the prebuckling and buckling responses of geometrically imperfect cylinders. The imperfect cylinder geometries are represented by an analytical approximation of the measured shape imperfections.
An accompanying experimental program is carried out to provide a means for comparison between the real and theoretical systems using a test fixture specifically designed for the present investigation to allow for both axial compression and internal pressurization. A description of the test fixture is included. Three types of tests were run on each specimen: (1) low internal pressure with no axial end displacement, (2) low internal pressure with a low level compressive axial displacement and, (3) compressive axial displacement to failure, with no internal pressure. The experimental data from these tests are compared to predictions for both perfect and imperfect cylinder geometries. Prebuckling results are presented in the form of displacement and strain profiles for each of the three sets of load conditions. Buckling loads are also compared to predicted values based upon classical estimates as well as linear and nonlinear finite element results which include initial shape imperfections. Lastly, the postbuckling and failure characteristics observed during the tests are described. / Ph. D.
|
2 |
Characterization of the jet emanating from a self-exciting flexible membrane nozzleLakhamraju, Raghava Raju 05 October 2012 (has links)
No description available.
|
3 |
Torsion of Elliptical Composite Cylindrical ShellsHaynie, Waddy 28 August 2007 (has links)
The response of elliptical composite cylindrical shells under torsion is studied. The torsional condition is developed by rotating one end of the cylinder relative to the other. Prebuckling, buckling, and postbuckling responses are examined, and material failure is considered. Four elliptical cross sections, defined by their aspect ratio, the ratio of minor to major radii, are considered: 1.00 (circular), 0.85, 0.70, and 0.55. Two overall cylinder sizes are studied; a small size with a radius and length for the circular cylinder of 4.28 in. and 12.85 in., respectively, and a large size with radii and lengths five times larger, and thicknesses two times larger than the small cylinders. The radii of the elliptical cylinders are determined so the circumference is the same for all cylinders of a given size. For each elliptical cylinder, two lengths are considered. One length is equal to the length of the circular cylinder, and the other length has a sensitivity of the buckling twist to changes in the length-to-radius ratio the same as the circular cylinder. A quasi-isotropic lamination sequence of a medium-modulus graphite-epoxy composite material is assumed. The STAGS finite element code is used to obtain numerical results. The geometrically-nonlinear static and transient, eigenvalue, and progressive failure analysis options in the code are employed. Generally, the buckling twist and resulting torque decrease with decreasing aspect ratio. Due to material anisotropy, the buckling values are generally smaller for a negative twist than a positive twist. Relative to the buckling torque, cylinders with aspect ratios of 1.00 and 0.85 show little or no increase in capacity in the postbuckling range, while cylinders with aspect ratios of 0.70 and 0.55 show an increase. Postbuckling shapes are characterized by wave-like deformations, with ridges and valleys forming a helical pattern due to the nature of loading. The amplitudes of the deformations are dependent on cross-sectional geometry. Some elliptical cylinders develop wave-like deformations prior to buckling. Instabilities in the postbuckling range result in shape changes and loss of torque capacity. Material failure occurs on ridges and in valleys. Cylinder size and cross-sectional geometry influence the initiation and progression of failure. / Ph. D.
|
Page generated in 0.0322 seconds