<p>This thesis will discuss a novel method of tracking the Sun. An essential aspect of the method is to rotate a polar aligned single axis tracker such that the angle between the direction of the Sun and the normal of the module remains at a constant angle of 23.44 degrees or a few degrees more. The rotational symmetry that arises from this circumstance enables seasonal tracking to occur inside the module whilst maintaining efficient concentration. Several possible optical designs and a preferred optical design are presented as a way of implementing the tracking method. The tracking method is also open to a plethora of different concentrator photovoltaic system designs which may be integrated onto rooftops more effectively than conventional dual axis tracking systems.</p> / Master of Applied Science (MASc)

A novel and original category of low-cost static solar-daylighting-collectors named Keywo solar energy, solar collectors, daylighting systems, nonimaging optics, Refractive Integrated Nonimaging Solar Collectors (RINSC) has been designed and thoroughly tested. The RINSC category is based on nonimaging optics and integrates several optical elements, such as prismatic arrays and light guides, into a single-structured embodiment made of solid-dielectric material. The RINSC category is sub-divided in this thesis into four distinctive and original sub-categories/systems: Prismatic Solar Collectors (PSC), Multi-Prismatic Solar Collectors (MPSC), Integrated Multi-Prismatic Solar Collectors (IMPSC) and Vertically Integrated Nonimaging Solar Collectors (VINSC). The optical configuration and compact embodiment of these systems allows them to be integrated into a building façade without creating any protrusion, indicating that they can lead to solar collector systems with high building integration potential. Laboratory and outdoor experimental tests conducted with a series of demonstration prototypes made of clear polymethyl-methacrylate (PMMA) and manufactured by laser ablation process, yield peak transmission efficiencies TE varying from 2% to 8%. Computer simulations indicated that transmission efficiencies TE > 30% are possible. The design and development of the innovative optical systems introduced in this thesis were backed-up with extensive computer ray-tracing analysis, rapid-prototyping, laboratory and outdoor experimental tests. Injection moulding computer simulations and surface analysis concerning the development of the RINSC systems were also conducted. Basic theory and comprehensive literature review are presented. This research has also resulted in the design and prototyping of a novel optical instrumentation named Angular Distribution Imaging Device (ADID), specially developed to analyse the spatial distribution of light emerging from the exit aperture of solar collectors/concentrators. The systems and knowledge described in this thesis may find application in areas such as solar collector systems to harvest sunlight for natural illumination in buildings, solar-photovoltaic and solar-thermal.

Reflector design stemmed from the need to shape the light emitted by candles or lamps. Over 2,000 years ago people realized that a mirror shaped as a parabola can concentrate light, and thus significantly boosts its intensity, to the point where objects can be set afire. Nowadays many applications require an accurate control of light, such as automotive headlights, streetlights, projection displays, and medical illuminators. In all cases light emitted from a light source can be shaped into a desired target distribution with a reflective surface. Design methods for systems with rotational and translational symmetry were devised in the 1930s. However, the freeform reflector shapes required to illuminate targets with no such symmetries proved to be much more challenging to design. Even when the source is assumed to be a point, the reflector shape is governed by a set of second-order partial non-linear differential equations that cannot be solved with standard numerical integration techniques. An iterative approach to solve the problem for a discrete target, known as the method of supporting ellipsoids, was recently proposed by Oliker. In this research we report several efficient implementations of the method of supporting ellipsoids, based on the point source approximation, and we propose new reflector design techniques that take into account the extent of the source. More specifically, this work has led to three major achievements. First, a thorough analysis of the method of supporting ellipsoids was performed that resulted in two alternative implementations of the algorithm, which enable a fast generation of freeform reflector shapes within the point source approximation. We tailored the algorithm in order to provide control over the parameters of interest to the designers, such as the reflector scale and geometry. Second, the shape generation algorithm was used to analyze how source flux can be mapped onto the target. We derived the condition under which a given source-target mapping can be achieved with a smooth continuous surface, referred as the integrability condition. We proposed a method to derive mappings that satisfy the integrability condition. We then use these mappings to quickly generate reflector shapes that create continuous target distributions as opposed to reflectors generated with the method of supporting ellipsoids that create discrete sets of points on the target. We also show how mappings that do not satisfy the integrability condition can be achieved by introducing step discontinuities in the reflector surface. Third, we investigated two methods to design reflectors with extended sources. The first method uses a compensation approach where the prescribed target distribution is adjusted iteratively. This method is effective for compact sources and systems with rotational or translational symmetry. The second method tiles the source images created by a reflector designed with the method of supporting ellipsoids and then blends the source images together using scattering in order to obtain a continuous target distribution. This latter method is effective for freeform reflectors and target distributions with no sharp variations. Finally, several case studies illustrate how these methods can be successfully applied to design reflectors for general illumination applications such as street lighting or luminaires. We show that the proposed design methods can ease the design of freeform reflectors and provide efficient, cost-effective solutions that avoid unnecessary energy consumption and light pollution.