In my diploma thesis the proposal is developed as supporting steel structure sports hall with dimensions 45 x 54 m, a maximum height of 15.5 meters,for the area of Znojmo. In a static calculation are designed and assessed the main bearing structural components such as solid panel purlins, spatial lattice truss, bracing and solid panel columns, which together with the truss form create a crosslinks, column bases and anchoring, plus Tribune.The work includes the design documentation consisting of a layout drawing, drawing anchoring and drawing selected details.

The topic of the thesis is a project of roof of a multifunctional sport object with a ground-plan covering area 35x48m, and maximum height of 16m. This construction is projected for Brno and its surroundings. The project of roofing is evolved in two different variants. First one is formed by double-jointed arched latticed truss. Supporting components such as purlins, lateral and longitudal bracings, frontal column and anchorage are designed and assessed in static calculation. At the end of the thesis, comparison of both variants is elaborated. Design documentation, which consists of dispositional drawing, drawing of truss for manufacturing, drawing of indicative details and plan of anchorage, is a part of the thesis.

The thesis contains the design and assessment of three-aisled steel building for small metal production. Supporting span of construction hall is 9, 18 and 9 m. In the middle wing is situated bridge crane with capacity of 2 tons. The estimated location of the object is Luhačovice. The initial design concept was specified by supervisor (as the idea of the investor/architect), for which was did static and structural solution and assembly details. For selected option was made a calculation of supporting structures and selected assembly details. The hall has a rectangular floor plan of 36x36m and ridge height is 9 m. The central wing is made of steel and side extensions are made of glued laminated timber.

The main content of of this thesis is a construction design and analysis of a machine for cutting tires. The resulting solution emerges from the design options and the option that meets the best selection criteria is chosen. Then the thesis stops for a while at the choice of cutting technology and tries to exemine its suitability for cutting tires. In its other part there is an attempt to clarify the relevant parts of the machine, where the benefits of three-dimensional views is used. Basic design and check calculations are done in the selected machine parts.

Thesis deals with design of a steel structure of multi-storey office building. It is a six-storey steel structure of square plan with dimensions of 40 x 48 meters and height of 21,5 meters. Structural design report is made by a combination of manual calculations and calculations using software Scia engineer. Structural design report includes calculations of: truss girder, column, connection, bracing, beam, secondary beam and column anchorage. Thesis includes drawing documentation and report.

Diploma thesis is developed the design and static assessment supporting steel structure Exhibition Hall of the overall ground dimensions 47x66m with a maximum height of 15.4 meters. Layout is designed in accordance with architectural requirements. The design is considered for Brno´s area. The proposal of roof system is designed in two versions whose dimensions are identical. The first option consists of a two-aisle hall object, parabolic truss girder, pin supported on fixed columns. The second variant also two-aisle building with truss frame structure assessed in static calculation. At the end of the thesis, comparison of both variants is elaborated. Design documentation, which consist layout drawing, drawing of truss for manufacturing, drawing indicative details and plan of anchorage, is a part od thesis

The final thesis is focused on the design of monolithic reinforced concrete ceiling slab and supporting vertical structures of typical floor of an administrative building. Calculation of internal forces is carried out in a computer software SCIA Engineer. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1).

The subject of this thesis is the design and assessment of the supporting structure multifunctional building in the Czech Budejovice . The construction of a sphere with a maximum diameter of 30 m and a height of 19.5 meters the highest point . The supporting structure consists of curved ribs , elevator shaft and ceiling beams . The structure is designed in 4 versions . Two variants are made of steel, the third option is wooden and the latest version solves a combination of wood and steel. In the variant selected is done loading , ultimate limit state, serviceability limit state , fire resistance and compounds selected details.

The final thesis is new building Basic school of art and music. The building is located in the urban area of Hronov. The building is divided into two wings. In one part of the building at 1 NP is mainly individual classrooms for play on an individual instrument. In the second part of the building is the concert hall, which is designed for orchestral rehearsal. The 2nd floor is mostly individual classrooms. In 3 NP is designed dance and ballet hall and individual classrooms. In the attic is a classroom for art education. The building has a partial basement. The building is planted on flat land. The building is brick from the system LIAPOR, overhead structures are made of panels SPIROLL, in the basement of a reinforced concrete slab. The roof construction is designed as a purlin roof and „hambalek“ purlin roofs made as saddle with a slope of 35 degrees.

Master’s thesis is based on analysis and design of a load bearing structure of an mountains hotel. Mountain hotel schould be realized in the village Vernirovice in Šumperk district. The proposed structure is formed 4th floors. In 1.NP is a restaurant, a sports and wellness center. In 2.NP in the right side is situated the swimming pool. In 2 to 4 floor are located rooms. This structure is supported with a strip footing made of reinforced concrete. The main load-bearing elements in the vertical direction are in 1.NP reinforced concrete walls and columns, the upper floors bearing masonry walls of ceramic blocks THERM. The inner support walls are 300 mm thick, outside support walls are 400 mm thick. Floors are constructed of carrying plates with girders above the larger openings. These plates and girders are made of reinforced concrete. In the 2 floor are beams with the span of 8,8 m. These girders are designed of prestressed concrete cause the large loads. Individual levels are connected with monolithic concrete staircases. Around the middle of the building is a monolithic reinforced concrete elevator shaft. The highest elevation above grade level is 16 m. The thesis also deals with relevant drawing documentations for chosen parts of construction.The building is located in the ski area VI and IV wind areas.