Spelling suggestions: "subject:"nosná"" "subject:"noses""
21 |
Stavebně technologický projekt polyfunkčního domu, Staré Brno / Architectural and technological project of multifunctional building, Old BrnoHradečný, Štěpán January 2018 (has links)
The diploma thesis deals with the technological stage of the lower structure, namely laying on piled foundations, including laying of a building pit with pilot reinforced concrete walls, and a rough top structure made of reinforced concrete walls, cores and reinforced concrete ceiling structure. The content is a technical report, solutions of wider transport relations, time and financial planning, studies of the main technological stages, equipment of the construction site of solved stages, design of the main building machines and mechanisms, technological regulations, control and test plans, safety and health protection at work, , thermal engineering assessment of selected constructions, budget, staff deployment balance, work progress scheme.
|
22 |
Polyfunkční dům / Multifuntional houseMelenovský, Jan January 2014 (has links)
The thesis deals with a Polyfunctional house. It´s lately erected building of self-standing block of flats with a pizzeria situated in Humpolec, Hradská Street. The building is designed as a four-storeyed cellarless house with eight separate housing units for thirty permanently living people. The pizzeria designed for thirty guests and five employees is included to the property. It´s situated in the firtst floor. Residential part and business premises are separated from each other operationally independent and accessible main entrance. The building is covered with a flat roof structures. The building plan uses load-bearing vertical structure of ceramic system Porotherm, horizontal structure consists of prestressed and reinforced concrete panels Spiroll board.
|
23 |
Viladům Kasalka v Humpolci / Villahouse Kasalka in HumpolecHonzárek, Pavel January 2015 (has links)
This diploma thesis deals with the project documentation of villa house Kasalka in Humpolci. The house is situated in the region Highland in the village Humpolec, cadastral territory of Humpolec. The building is designed as a five-story brick building, where the vertical structures are designed from a structural system POROTHERM. The external walls are insulated. The building is covered with three flat roof decks at different heights, two of which are walkable and used as terraces. The building includes Garage for ten cars of type 1a and small establishment an office type.
|
24 |
Sidlo stavební firmy / Head Office building companyMalý, Jiří January 2015 (has links)
This thesis processes project documentation for headquarters of construction company. Main purpose of building is to facilitate administrative nd manufacturing needs of the company. Building contains of reception, offices, meeting room, restrooms and lock rooms for employees, elevator and workshops. There is underground garage in the basement. Building is going to be situated in Stritez u Policky. Building takes up 1088m2 of land. Vertical structures are mainlymade of concrete and brick blocks. Horizontal structures are made of reinforced concrete panels, roof structure is made of wooden trusses.
|
25 |
Nosná konstrukce bytového domu Palackého třída 24, Brno / Load - bearing structure of apartment blockNečas, Daniel January 2013 (has links)
Master’s thesis is based on analysis and design of a load bearing structure of an apartment block. This structure is supported with a strip footing made of reinforced concrete. The above-ground part of designed structure consists of brick masonry. Floors are constructed of carrying plates. These plates are made of reinforced concrete and precast boards (prestressed concrete). Individual levels are connected with monolithic concrete staircases. The thesis also deals with relevant drawing documentations for chosen parts of construction.
|
26 |
Wellness hotel / Wellness hotelBambas, Vratislav January 2013 (has links)
Newly built Wellness hotel. The building is partially basement. The building has three parts. The central part is made of reinforced concrete skeleton and has five aboveground floors. This part serves as the main entrance hall and staircase. The side tracts have four aboveground floors and their support system is a transverse wall, brick, from the system Porotherm. In the basement there is a swimming pool and hotel facilities. There is located a restaurant too. On the second floor there are rooms, a gym and services. On the top floor there are only hotel rooms. The building is based on thecontinous footings. Roofing is made arched trusses.
|
27 |
Mateřská škola / Nursery SchoolKoutná, Vendula January 2014 (has links)
Master’s thesis „Nursery School" is proceed in form of project document, including all requirement according to standards and regulations. New building is located on parcel number 439/50 in city Přerov. Detached building has three floors and is partly cellarage. It is brick construction system based on packs. The roofs are flat, and constructed as single shell. Te floors are connected by prefabricated concrete staircase and by elevator. The nursery school is designed as a four departments building, with capacity of 96 children.
|
28 |
Mateřská škola, Brno - Tuřany / Nursery school, Brno - TuřanyKleinová, Eva January 2015 (has links)
The subject of this thesis is the solution of a new building of nursery school in the part of city Brno – Tuřany. It is a cellarless, detached building and single-storey building. Nursery school will be two classes with 40 children. The floor plan is irregularly – shaped plan with orientation of the classes to the east. Building is designed from structural masonry system Porotherm with contact thermal insulation system. Roofing is solved with use of two different slopes of timber girder.
|
29 |
Nosná konstrukce rodinného domu / Load-bearing structure of the family houseKabrhelová, Eliška January 2017 (has links)
Master's thesis is focused on the design and assessment of load-bearing structure of the family house. Model reinforced concrete structure is created in RFEM. Elements of reinforced concrete are Assessed in accordance with EN 1992-1-1. Excepting static calculation is part of documentation the technical report and drawings shape and reinforcement.
|
30 |
Rozhledna / Lookout towerJedzoková, Patricie January 2022 (has links)
The object of the diploma thesis is design and assessment of a steel lookout tower situated in Beskydy mountains. Two different variants were designed. The first variant is of square shaped plan and the second one is of hexagonal shaped plan. Both variants are spatial truss structures. They are shaped as hourglass. The variants were compared and the first one was chosen to be further developed. The lookout tower is 36 meters high and it is divided by floors. One floor is 3,6 meters high. The widest section is 8 meters, the narrowest section is 5 meters wide. The structure is pin-supported into concrete foundation. The concrete is class C25/30. The roof covering is made of trapezoidal sheet of class S280GD. Each steel element is made of steel of class S355.
|
Page generated in 0.0274 seconds