The subject of the diploma thesis is the design and the assessment of two variants of existing HVAC system, that serves the microelectronic laboratory premises of GL Electronic company, which are situated in JIC INMEC center. The aim of the designing process is to find the optimal solution of the problem, which is concerned of excessive air humidity gains in the clean rooms. The first proposed approach is the installation of controlled dehumidification in the form of direct cooling into the yet existing device. The second considered approach is a complete deconstruction of implemented air conditioning unit and subsequent reinstalling of the brand new unit, which would meet all the requirements. Both two variants will be in the beginning outlined in a form of pre-study, selected option will be later on processed as project documentation for construction. The winning solution will be designed in the way that will satisfie the criteria of hygiene, function, and economy. The next section of the text will be dedicated to the research regarding the topic of the physical nature of air humidity, of the transportation of humidity, dehumidification of the space, also. Last but not least, the heat recovery efficiency will be measured (in the form of thermal glycol tubes). The experiment provides evidence of the system's real-time performance.

The thesis deals with the design of the experimental testing rig. Test rig is designed to measure NVH transmission parameters. First, basic knowledge of vibro-acoustic measurement is discussed. This is followed by an evaluation of the most commonly used power devices to derive real loads on measured gearboxes. In more detail, a back-to-back test rig is disassembled among other things. In the thesis are described two main components, which are composed of a connecting element and a test bench. Both components were optimized during the design due to their modal properties. Numerical modal analysis was performed in ANSYS Workbench software. The thesis also includes strength calculations performed using both numerical and analytical approaches. The indispensable result of the design work is the complete drawing documentation. Finally, measurements of vibrations and noise on the physically made connecting element assembly have been performed and subsequently evaluated.

The master thesis deals with design of test rig for long-term testing of coupling appointed to railway vehicles. At first, there is made a brief research which is related to railway coupling used for transmitting a torque. This is followed by an analysis of the most used power devices to derive real loads conditions of tested couplings. There is chosen the most appropriate conception based on made analysis and it is followed by the description of designed components. There is made a verification of modal properties non-purchased components which is necessary part of the thesis. Numerical modal analysis was performed in ANSYS Workbench software. In the end of the thesis there are included stress-strain analysis of the chosen designed components.

The goal of this thesis is to design variant solution of interconnection of great city circuit and exhibition ground with secured safety of traffic without local area accesibility sacrification.

This diploma thesis deals with the analysis of the drainage pipeline of the Škoda K 220-44 steam turbine. This turbine is operated in Dukovany Nuclear Power Plant. One part of this work is proposal of corrective measures. The aims of this work include the creation of a search for drainage, steam, erosion corrosion and mapping of defects in long-term operated drainage system. Work also includes the evaluation of measured values of the pipe wall thickness measured by ultrasonic analyzer. In addition, the work contains images created from 3D model, on which the location of defects and measurements are displayed.

The Master’s thesis deals with the processing of solar thermal systems for heating hot water, outdoor swimming pool and heating selected house. Introduces us how we can use the sun for the production of thermal energy through solar collectors. Furthermore, the basic components of the solar system and the types of collectors used. After this summary on the present state be the calculation of the system and fixing the price of the investment. The economic part of the evaluate if this system to invest, eventually appoint a return on investment.

Master’s thesis deals with cogeneration units of low power that are used for heating of buildings and to cover the heat demand of small industrial enterprises. The introductory chapters are focusing on clarifying the principles of combined heat and power (CHP) as well as on the basic advantages and important indicators of CHP. The thesis presents a brief overview of cogeneration devices by type of primary units and also provides an overview of cogeneration units suitable for family houses that are currently available on the market. The text describes how to install and connect the cogeneration unit. The fourth chapter includes description of elemental thermal processes and possibility of heat transfer. The fifth chapter describes the thermal circuit model and calculation efficiency of a cogeneration unit. Thermal circuit consists of a cogeneration unit and a multivalent tank for hot water heating system and potable hot water system. The object of master’s thesis is to create a model of thermal circuit cogeneration units in a simulation program and a graphical user interface, that will allow a simple way to evaluate the operation of the cogeneration unit when changing the input parameters.

Master’s thesis presents the machine - technological design of the hydraulic circuit of laboratory, which is part of project documentation. The main part’s of thesis are hydraulic circle and hydraulic measuring flume and control algorithm of pumping stations and visualization of control of hydraulic circuit to display.

Tato práce shrnuje autorův výzkum v oblasti teorie kvaternionových algeber, jejich izomorfismů a maximálních řádů. Nový úhel pohledu na tuto problematiku je umožněn využitím pojmu diskrétní normy. Za hlavní výsledky práce je možná považovat důkaz jednoznačnosti diskrétní normy pro celá čísla, kvadratická rozšíření těles a řády kvaternionových algeber. Dále větu, která umožňuje mezi dvěma kvaternionovými algebrami konstruovat izomorfismy explicitně vyjádřené v maticovém tvaru. A v neposlední řadě důkaz existence nekonečně mnoha různých maximálních řádů kvaternionové algebry. Výsledky uvedené v této diplomové práci budou dále publikovány ve vědeckém článku.

The aim of this Diploma thesis is a description of gas heat pump (GHP) technology and the possibility of their usage in real life. Also units from the major manufactures of GHP units in the Czech Republic and abroad are evaluated from technical and economical point of view. The thesis as well includes a part where is decided if it is better to further develop GHP units with higher or lower performance. In the last part of thesis are cooling circuits designed for both lower and higher performance, than performance of existing GHP unit Polo 100. As a result, the units with higher performance are more perspective. Therefore heat plate exchangers, which serve as a condenser and an evaporator, are designed for unit with higher performance.