No / A low-profile (λ/43) miniaturized multi-element antenna is presented, which displays vertical polarization with an omni-directional radiation pattern. The antenna uses a logarithmic spiral shape as the main radiating element such that the impedance bandwidth of the antenna is much improved in comparison with both a strip-line square spiral design and a strip-line circular spiral design. The antenna demonstrates stable gain and useful efficiency over the operating frequency band. Significantly, the antenna provides a low profile, omnidirectional pattern in the azimuth plane, polarizes normal to the ground-plane with a 1.2% bandwidth and 0.5 dBi gain.

ITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Most range safety telemetry tracking systems have antenna designs that feature an S-band (2200-2400 MHz) Telemetry Tracking and UHF-Band (400-450 MHz) Command Destruct feed along side an omni-directional antenna. The antennas must have, by design, high angular velocity (w) and acceleration (α) parameters to achieve these tasks. Generally, these parameters are user configurable through software and monitored through BIT (Built In Test) log files. The parameters are nominally set to their maximum values (ie. w=10 deg/sec and α = 15 deg/sec².) Considering the dynamics of a sample satellite launch vs. the ground tracking and omni antennas' combined capabilities, this document analyzes whether the target will stay within the beam.

This thesis deals with brief research on problematics of antennas in microwave band for omni-directional applications, own design and assembling of such an antenna. The purpose of the design is to have a best possible radiation patterns and reflection loss of our antenna. Conical monopole is chosen and it is simulated and changed to get the best possible parameters. Two prototypes are manufactured with mechanical changes applied and their parameters measured. Finished antenna is used for experimental channel measurement.

No / A miniaturized conical helix antenna is presented, which displays vertical polarization with electrically small dimensions of 10mm×10mm×45mm. The resonance of the antenna is made tunable by adding a variable digital MEMS capacitor load at the bottom of the helix, giving a tuning range of 316 MHz to 400 MHz. The antenna demonstrates considerable impedance matching bandwidth and gain over the entire tuning frequency band. Most importantly, the antenna is capable of compact, flexible and easy integration into a wireless device package or for platform installation. / Datong of Seven Technology Group, for their support under the KTP project grant No. 008734.