1 |
"Eletrólitos sólidos cerâmicos à base de óxido de zircônio para a detecção de oxigênio" / "Zirconium oxide based ceramic solid electrolytes for oxygen detection"Caproni, Érica 27 August 2003 (has links)
Tendo como vantagem a elevada resistência ao choque térmico da zircônia:magnésia e a alta condutividade iônica da zircônia:ítria, compósitos dessas cerâmicas foram preparados por meio da mistura, em diferentes concentrações, de eletrólitos sólidos de ZrO2: 8,6 mol% MgO e de ZrO2: 3 mol% Y2O3, compactação e sinterização. A caracterização microestrutural foi feita por meio de difração de raios X e microscopia eletrônica de varredura. A análise do comportamento térmico foi feita por dilatometria. As propriedades elétricas foram estudadas por meio de espectroscopia de impedância. Foi feita uma montagem experimental para monitorar a resposta elétrica gerada em função do teor de oxigênio a altas temperaturas. Os principais resultados mostram que os compósitos cerâmicos são parcialmente estabilizados nas fases monoclínica, cúbica e tetragonal, e apresentam comportamento térmico similar ao apresentado por eletrólitos sólidos de zircônia:magnésia de dispositivos sensores de oxigênio. Além disso, os resultados de análise de espectroscopia de impedância mostram que a adição da zircônia:ítria melhora o comportamento elétrico da zircônia:magnésia, e que resposta elétrica gerada é dependente do teor de oxigênio a 1000 °C, mostrando ser possível construir sensores de oxigênio utilizando compósitos cerâmicos. / Taking advantage of the high thermal shock resistance of zirconia-magnesia ceramics and the high oxide ion conductivity of zirconia-yttria ceramics, composites of these ceramics were prepared by mixing, pressing and sintering different relative concentrations of ZrO2: 8.6 mol% MgO and ZrO2: 3mol% Y2O3 solid electrolytes. Microstructural analysis of the composites was carried out by X-ray diffraction and scanning electron microscopy analyses. The thermal behavior was studied by dilatometric analysis. The electrical behavior was evaluated by the impedance spectroscopy technique. An experimental setup was designed for measurement the electrical signal generated as a function of the amount of oxygen at high temperatures. The main results show that these composites are partially stabilized (monoclinic, cubic and tetragonal) and the thermal behavior is similar to that of ZrO2: 8.6 mol% MgO materials used in disposable high temperature oxygen sensors. Moreover, the results of analysis of impedance spectroscopy show that the electrical conductivity of zirconia:magnesia is improved with zirconia-yttria addition and that the electrical signal depends on the amount of oxygen at 1000 °C, showing that the ceramic composites can be used in oxygen sensors.
|
2 |
"Eletrólitos sólidos cerâmicos à base de óxido de zircônio para a detecção de oxigênio" / "Zirconium oxide based ceramic solid electrolytes for oxygen detection"Érica Caproni 27 August 2003 (has links)
Tendo como vantagem a elevada resistência ao choque térmico da zircônia:magnésia e a alta condutividade iônica da zircônia:ítria, compósitos dessas cerâmicas foram preparados por meio da mistura, em diferentes concentrações, de eletrólitos sólidos de ZrO2: 8,6 mol% MgO e de ZrO2: 3 mol% Y2O3, compactação e sinterização. A caracterização microestrutural foi feita por meio de difração de raios X e microscopia eletrônica de varredura. A análise do comportamento térmico foi feita por dilatometria. As propriedades elétricas foram estudadas por meio de espectroscopia de impedância. Foi feita uma montagem experimental para monitorar a resposta elétrica gerada em função do teor de oxigênio a altas temperaturas. Os principais resultados mostram que os compósitos cerâmicos são parcialmente estabilizados nas fases monoclínica, cúbica e tetragonal, e apresentam comportamento térmico similar ao apresentado por eletrólitos sólidos de zircônia:magnésia de dispositivos sensores de oxigênio. Além disso, os resultados de análise de espectroscopia de impedância mostram que a adição da zircônia:ítria melhora o comportamento elétrico da zircônia:magnésia, e que resposta elétrica gerada é dependente do teor de oxigênio a 1000 °C, mostrando ser possível construir sensores de oxigênio utilizando compósitos cerâmicos. / Taking advantage of the high thermal shock resistance of zirconia-magnesia ceramics and the high oxide ion conductivity of zirconia-yttria ceramics, composites of these ceramics were prepared by mixing, pressing and sintering different relative concentrations of ZrO2: 8.6 mol% MgO and ZrO2: 3mol% Y2O3 solid electrolytes. Microstructural analysis of the composites was carried out by X-ray diffraction and scanning electron microscopy analyses. The thermal behavior was studied by dilatometric analysis. The electrical behavior was evaluated by the impedance spectroscopy technique. An experimental setup was designed for measurement the electrical signal generated as a function of the amount of oxygen at high temperatures. The main results show that these composites are partially stabilized (monoclinic, cubic and tetragonal) and the thermal behavior is similar to that of ZrO2: 8.6 mol% MgO materials used in disposable high temperature oxygen sensors. Moreover, the results of analysis of impedance spectroscopy show that the electrical conductivity of zirconia:magnesia is improved with zirconia-yttria addition and that the electrical signal depends on the amount of oxygen at 1000 °C, showing that the ceramic composites can be used in oxygen sensors.
|
3 |
Development of novel implantable sensors for biomedical oximetryMeenakshisundaram, Guruguhan 10 September 2008 (has links)
No description available.
|
4 |
A Logic Gate Based on a Flexible Metal–Organic Framework (JUK-8) for the Concomitant Detection of Hydrogen and OxygenRoztocki, Kornel, Bon, Volodymyr, Senkovska, Irena, Matoga, Dariusz, Kaskel, Stefan 22 May 2024 (has links)
We present an autonomous, chemical logic gate based on a switchable metal–organic framework (MOF) composite, containing carbon nanoparticles and a Pt catalyst. The switchable MOF composite performs as AND logic gate. Hydrogen and oxygen gas streams serve as binary inputs. Catalytically formed water induces a structural transition (crystal volume expansion) of the MOF, and as a consequence, a detectable drop in conductance of the composite as a ‘true’ output only if both gases come in contact with the composite.
|
5 |
Thermoelectrics and Oxygen Sensing Studies of Selected Perovskite OxidesBehera, Sukanti January 2016 (has links)
Perovskite oxides show wide range of applications in the area of magnetism, ferroelectricity, piezoelectricity, thermoelectricity, gas sensing, catalyst development, solid oxide fuel cell, etc. This is due to flexibility in the structure and compositions that can be tuned by specific element doping. In the perovskite oxide (ABO3), large cation (A) is 12 -coordinated and smaller B-cation is 6 coordinated with oxide ions. Oxide materials are considered as better candidates for thermoelectric applications (interconversion of thermal into electrical energy) due to its non-toxicity and thermal stability at elevated temperature. These are insulating in nature and the conductivity can be increased by doping A and / or B –sites. Perovskite oxides are also used for oxygen monitoring in different applications including control and optimization of combustion of fossil fuels in industries and automobiles, biological and defines places, etc.
In the present study, we focused on thermoelectric properties in single perovskite oxides of lanthanum cobaltite and calcium manganite and a double perovskite oxide of dysprosium barium cobaltite. Also, the oxygen sensing behaviour of dysprosium barium cobaltite at elevated temperatures is studied. The thesis contains seven chapters and a summary of respective chapters are given below.
The first chapter outlines the basics of thermoelectric and gas sensing applications of both perovskite and double perovskite oxides. In the initial part, thermoelectric phenomena are explained. Thermoelectric effect is the conversion of thermal energy to electrical energy and vice-versa. Higher thermoelectric efficiency
(η) can be achieved by maintaining a large temperature difference across the material. The efficiency depends on the thermoelectric figure of merit (zT) of material, which depends on thermopower (S), electrical resistivity (ρ) and thermal conductivity
(κ) of the material and hence needs to be optimized. The latter part discusses the oxygen sensing property of distorted double perovskite 112 structure type as it shows advantages over other materials due to oxygen nonstoichiometric. Further, an overview of the relevant literature, objective and scope of the thesis are mentioned.
The second chapter elucidates the materials and methods used for the present work. The materials viz. LaCoO3, CaMnO3-δ and DyBaCo2O5+δ, were selected for thermoelectric and oxygen sensing studies. Both the conventional solid state and soft chemistry methods were adopted for the synthesis of these materials. Powders were densified into pellets by hot uniaxial pressing / cold isostatic pressing and various heat treatments were carried out. Samples thus prepared were phase pure as confirmed using powder x-ray diffraction and Rietveld refinement performed for structural analysis. Morphological studies were carried out using scanning electron microscopy and transmission electron microscopy. Further Raman and x-ray photoelectron spectroscopic characterization of these materials were discussed. The transport properties viz. electrical resistivity, thermopower and thermal conductivity of compact pellets were measured at elevated temperatures. Further, the home-built apparatus for room temperature See beck measurements and chemo resistive oxygen sensing were explained in detail as a part of this work.
The third chapter describes the effect of monovalent ion doping (Na+ and K+) at A-site of lanthanum cobaltite on thermoelectric properties. Lanthanum cobaltite system exhibit exotic behaviour due to commensuration phenomena of spin, lattice, charge and metal insulator transition. The synthesis, followed by structural refinements by Rietveld method using Fullprof suit program are explained. The results of the transport properties indicate that there is no appreciable change in the See beck Coefficient of K-doped samples throughout the studied temperature range.
The Na-doped samples exhibit a decrease in the Seebeck value with increasing Na content at room temperature. At higher temperatures Seebeck value matches with that of the parent sample. This may be due to a change in the ratio of the concentration of Co4+/Co3+ ions which increases the configurational entropy of the system. In conclusion, the highest figure of merit (0.01) found for the Na / K- doped lanthanum cobaltite is for 15 atomic wt. % of doping amongst the studied samples.
The fourth chapter explains about Tb/Nb co-doped calcium manganite for thermoelectric applications. The CaMnO3-δ shows enhanced thermoelectric properties, exhibits n-type behavior and the absolute thermopower is found to be 129 µV/K. Here, we investigated the Terbium and Niobium codoped at Ca and Mn-sites respectively. The presence of oxygen non-stoichiometry was confirmed using Raman spectroscopy (Mn3+ peak at 614 cm-1) and δ value was evaluated by iodometric titration. The thermoelectric properties of cold isostatic pressed (CIP) pellets prepared by the solid state and soft chemistry routes are compared. The non-monotonous behavior of absolute thermopower may be due to the increase of Mn3+ in the Mn4+ matrix and also the presence of oxygen defects in compounds. The thermoelectric figure of merit of solid state sample CaMnO3-δ estimated of 0.036 at 825K.
The fifth chapter describes the thermoelectric properties of double Perovskite AA’B2O6 (112 type): (RE)BaCo2O5+δ. It is a disordered double perovskite with non-stoichiometry in oxygen and exhibits mixed valences of Cobalt. Resistivity of DyBaCo2O5+δ was found to be 0.09 Ω cm and Seebeck coefficient is found to be 42 µV/K. In order to improve the thermopower value, the Fe is substituted at Co-site. This varies the valences of Cobalt that in turn leads to a higher thermopower. Also, the morphology of thermally etched CIP pellets recorded and correlated with the transport properties. It shows the highest thermoelectric figure of merit of 0.25 at 773 K for 20 at wt % of Fe substituted sample.
The sixth chapter explains about oxygen sensing studies of DyBaCo2O5+δ (112 type). The detailed structural and morphological characterization studies were carried out. Thermogravimetric analysis at isothermal temperature 873 K shows fast intake/release of oxygen of this disordered double perovskite structure. The higher chemo resistive oxygen sensitivity at the elevated temperature was measured. Further, the systematic study on the effect of oxygen sensing on the substitution of Fe and Cu at Co-site in DyBaCo2-xM xO5+δ was investigated. The possible bulk diffusion mechanism at higher temperature due to movement of oxygen defects were explained. The highest sensitivity was obtained for x = 0.4 at % of Fe and 0.2 at % of Cu at 973 K and 823 K respectively.
The key findings and future aspects are summarized in the chapter-7.
|
Page generated in 0.0618 seconds