Even though KTiOPO4 (KTP) is considered to be one of the best nonlinear materials for quasi phase matched (QPM) frequency conversion in the visible and the near-infrared spectral regions, its use is often limited by poor material homogeneity, high ionic conductivity, a considerable linear absorption and photochromatic damage. On the other hand, the improved material homogeneity and the lower ionic conductivity of bulk Rb-doped KTP (RKTP) make this material an ideal alternative for fabrication of fine-pitch QPM gratings, while the arsenate isomorph KTiOAsO4 (KTA) promises a better performance in the green spectral region and adds the advantage of a wider transparency window in the infrared. Unfortunately, the available studies on these materials are limited and unable to answer the question whether RKTP and KTA are feasible alternatives to KTP in terms of periodic poling and optical performance. The optical performance of the QPM devices depends on the periodic poling quality, therefore, a detailed comprehension of domain-grating formation in the KTP isomorphs is highly desired. The goals of this thesis were to gain a better understanding of the periodic poling process in the KTP isomorphs, in order to study the specifics of ferroelectric domain engineering in KTA and RKTP, and to evaluate the optical performance of these isomorphs. Fine-pitch periodically poled structures were engineered both in KTA and RKTP crystals. It was demonstrated that QPM gratings with excellent quality and with periods as short as 8.49 μm can be fabricated in KTA crystals. Comparative transmission studies have shown that periodically poled KTA (PPKTA) crystals can be superior to KTP for QPM second harmonic generation in the visible spectral region due to lower linear absorption. It was also demonstrated that RKTP is a superior alternative to KTP for high-quality QPM grating fabrication. A consistent room-temperature periodic poling of 5 mm thick RKTP crystals with a period of 38.86 μm has been achieved. The obtained large aperture periodically poled RKTP (PPRKTP) crystals showed an outstanding QPM grating uniformity and excellent optical performance in optical parametric oscillator (OPO) applications. Moreover, it was shown that RKTP is less susceptible to blue-induced infrared absorption than KTP. Finally, a novel and a relatively simple method for self-assembling quasi-periodic sub-μm scale ferroelectric domain structure in RKTP crystals has been presented. It was shown that, after treatment in aqueous KOH/KNO3 solution, periodic poling of RKTP with planar electrodes resulted in one-dimensional ferroelectric domain structure with an average periodicity of 650±200 nm, extending over the whole 1 mm thick crystal. Such self-assembled structures in RKTP were used to demonstrate 5th order non-collinear QPM backward second harmonic generation. / <p>QC 20140114</p>

Fine-pitch ferroelectric domain gratings are extensively used for generation of light in the visible and near-infrared spectral regions through quasi-phase matched (QPM) frequency conversion. Sub-μm QPM devices enables demonstration of nonlinear optics with counterpropagating waves, a field of nonlinear optics which remains sparsely explored due to the difficulty of fabricatinghigh quality gratings. In recent years, bulk Rb-doped KTiOPO4 (RKTP) has emerged as a highly promising nonlinear materials for fabrication of fine-pitch QPM devices through periodic electric-field poling. RKTP possesses large optical nonlinearity and high resistance to optical damage, while demonstrating improved material homogeneity and lower ionic conductivity than its isomorphs, which are important features for poling. Although fine-pitch QPM gratings, as well as large aperture QPM devices, have been demonstrated, fabrication of sub-μm high quality QPM devices remains a challenge. The primary aim of this research was to develop a reliable method to fabricate high-quality sub-μm periodically poled RKTP crystals (PPRKTP) and exploit them in novel optical applications. For this purpose, a novel poling method was developed. It was based on periodic modulation of the coercive field through ion exchange, where K+ ions are exchanged with Rb+ in the crystal, to modulate the coercive field and the ionic conductivity. This enables periodic poling of higher quality and with shorter period than ever before. High quality PPRKTP with a period of 755 nm were fabricated and used to demonstrate the first cascaded mirrorless optical parametric oscillator (MOPO), as well as the first MOPO pumped by a Q-switched laser. PPRKTP samples for blue light generation were fabricated, and second harmonic generation (SHG) was investigated with a high power 946 nm fiber laser. Up to 2 W of blue power was demonstrated for bulk samples, where the output power was limited by absorption of the SHG, leading to thermal dephasing of the devices. Laser-written waveguides were fabricated in PPRKTP for the first time, and a record high SHG power of 76 mW was obtained. Finally, the high-temperature stability of ferroelectric domain gratings was investigated. This is of utmost importance when a PPRKTP crystal is used as a seed for crystal growth. It was found that for charged domains walls, the domain-wall motion was highly anisotropic with rapid movement in y-direction while only small movements were observed in the x-direction of the crystal. / Ickelinjära ferroelektriska kristaller med artificiella domängitter med perioder av några mikrometer används idag för generering av ljus i de synliga och nära-infraröda våglängdsområdena, genom kvasifasmatchad (QPM) frekvenskonvertering. Med sub-μm QPM domängitter kan man åstadkomma ickelinjära optiska effekter med motpropagerande parametriska ljusvågor. Detta är ett område av den ickelinjära optiken som fortfarande är tämligen outforskat på grund av svårigheten med att tillverka högkvalitativa domängitter.  Under de senaste åren har Rb-dopat KTiOPO4 (RKTP) blivit ett mycket lovande ickelinjärt material för tillverkning av QPM-gitter med mycket korta perioder genom periodisk elektrisk fält polning. RKTP kristallen har en hög optisk ickelinejäritet och den tål höga optiska intensiteter, samtidigt som materialet har bättre materialhomogenitet och lägre jonledningsförmåga än vad dess isomorfa kristaller har. De två senare egenskaperna har visat sig viktiga för att få en lyckad polning. Fastän QPM-gitter med kort periodicitet, liksom QPM-gitter med stor apertur, har demonstrerats, är tillverkningen av högkvalitativa QPM-kristaller med sub-µm perioder fortfarande en utmaning. Det primära syftet med denna avhandling var att utveckla en pålitlig metod för att tillverka högkvalitativa sub-μm periodiskt polade RKTP kristaller (PPRKTP) och utnyttja dem i nya optiska tillämpningar. I detta syfte utvecklades en ny polningsmetod. Den baseras på periodiskt jonutbyte, där K+ joner byts mot Rb+ i kristallen, vilket resulterar i en samtidig modulation av materialets koerciva fält och jonledningsförmåga. Detta möjliggör i sin tur periodisk polning av högre kvalitet och med kortare perioder än någonsin tidigare har uppnåtts. Högkvalitativa PPRKTP kristaller med en period på 755 nm tillverkades och användes för att demonstrera den första kaskaderade spegelfria optiska parametriska oscillatorn (MOPO), liksom den första MOPO processen pumpad av en Q-switchad laser. Vidare utvecklades PPRKTP-kristaller för generering av blått ljus via frekvensdubbling. Dessa utvärderades med hjälp av en högeffekts-fiberlaser vid 946 nm. Upp till 2 W av blått ljus erhölls för bulkkristallerna. Uteffekten begränsades av absorption av det blåa frekvensdubblade ljuset, vilket ledde till urfasning i QPM-gittret p.g.a. termiska effekter. Laserskrivna vågledare tillverkades sedan i PPRKTP för första gången, och en rekordhög effekt på 76 mW erhölls via frekvensdubbling. Slutligen undersöktes stabiliteten hos de periodiskt polade domängitterna vid höga temperaturer. Det är viktigt att domängittrena är stabila när PPRKTP kristallerna används som ympämne för kristalltillväxt. Det visade sig att instabila domänväggar flyttade sig mycket anisotropt, med en snabb rörelse i kristallens y-riktning och en långsam rörelse i kristallens x-riktning. / <p>QC 20170519</p>

Material and structure engineering are increasingly employed in active optical media,in this context defined as media capable of providing laser or/and optical parametric gain. For laser materials, the main aim of the engineering is to tailor the absorption and emission cross sections in order to optimise the laser performance. At the same time, the engineering also results in a collateral modification of the material’s nonlinear response. In the first part of this work, the nonlinear index of refraction is characterised for two crystallographic forms of laser-ion doped and undoped double-tungstate crystals. These laser crystals have broad gain bandwidths, in particular when doped with Yb3+. As shown in this work, the crystals also have large Kerr nonlinearities, where the values vary significantly for different chemical compositions of the crystals. The combination of a broad gain bandwidthand a high Kerr nonlinearity makes the laser-ion doped double tungstates excellent candidates to employ for the generation of ultrashort laser pulses by Kerr-lens modelocking. The second part of the work relates to the applications of engineered second-order nonlinear media, which here in particular are periodically-poled KTiOPO4 crystals. Periodic structure engineering of second-order nonlinear crystals on a submicrometre scale opens up for the realisation of novel nonlinear devices. By the use of quasi-phase matching in these structures, it is possible to efficiently downconvert a pump wave into two counterpropagating parametric waves, which leads to a device called a mirrorless optical parametric oscillator. The nonlinear response in these engineered submicrometre structures is such that the parametric wave that propagates in the opposite direction of the pump automatically has a narrow bandwidth, whereas the parametric wave that propagates with the pump essentially is a frequency-shifted replica of the pump wave. The unusual spectral properties andthe tunabilities of mirrorless optical parametric oscillators are investigated. / QC 20120330

No description available.