京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20763号 / 工博第4415号 / 新制||工||1686(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 陰山 洋, 教授 阿部 竜, 教授 江口 浩一 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21271号 / 工博第4499号 / 新制||工||1700(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 陰山 洋, 教授 江口 浩一, 教授 阿部 竜 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

京都大学 / 0048 / 新制・課程博士 / 博士(エネルギー科学) / 甲第21884号 / エネ博第385号 / 新制||エネ||75(附属図書館) / 京都大学大学院エネルギー科学研究科エネルギー基礎科学専攻 / (主査)教授 佐川 尚, 教授 萩原 理加, 教授 野平 俊之 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DGAM

Mould powders are synthetic slags that contain mixtures of silica (SiO2), lime (CaO), sodium oxide (Na2O), fluorspar (CaF2), and carbon (C). When heated to elevated temperatures these powders liquefy and float on the liquid steel in the mould. Mould oscillation helps the liquid flux to penetrate the tiny gap between the mould and the newly formed solid steel shell. In this position the liquid flux partially solidifies against the water cooled mould, while a small portion of the flux remains liquid next to the steel shell to provide lubrication between the moving parts. Effective horizontal heat transfer in the mould is critical for solidifying the liquid steel inthe mould. This process is largely influenced by the thickness and the nature of the flux layer that infiltrates the mould/shell gap. When casting titanium stabilised stainless steels the alloying element reacts with the molten flux, ultimately changing the behaviour of the flux. During the casting process, titanium from the liquid steel reacts with the molten flux producing solids at high temperatures known as perovskite (CaTiO3). Research has shown that perovskite reduces the lubrication capabilities of casting fluxes leading to detrimental effects on product quality while posing a serious threat of machine damage (breakout). The focus of this study is to investigate the effect of titanium pickup on the solidification nature of mould flux and the consequences on horizontal heat transfer. To achieve this, an experimental setup was constructed to simulate the behaviour of mould flux during continuous casting. Analyses of the test flux indicated that the liquid flux closest to the cold side (mould) instantly froze to produce a glassy solid structure. Closer to the hot side (steel shell), solid particles such as perovskite, cuspidine (Ca4Si2O7F2), olivine (Ca,Mg,Mn)2SiO4 and nepheline (Na2O.Al2O3.(SiO2)2) could be identified. Similar solid particles were also found in a slag rim sample taken during the industrial casting of 321- titanium stabilised stainless steel using SPH-KA1 mould powder. Further investigations of the crystalline flux layers showed the entrapment of many tiny gas bubbles during solidification. This porous structure acted as a thermal heat barrier limiting horizontal heat transfer. Experimental testing on 3.0 and 6.0mm flux thickness revealed that the overall thermal conductivity of mould flux decreased as the flux porosity increased. Larger amounts of gas entrapment (in the solid flux structure) resulted in higher thermal resistances which ultimately reduced the heat transfer capabilities of the flux. A second heat barrier, which has a far more dominating effect on the overall heat transfer, is created on mould surface during flux solidification. This thermal contact resistance is also found to be the result of entrapped gas bubbles. Experimental results concluded that the effect of titanium pickup on heat transfer is primarily overshadowed by the larger effect of the thermal contact resistance that is formed during mould flux solidification. The contact resistance in combination with gas entrapment in the solid crystalline structure is considered to be the key factors preventing horizontal heat transfer during continuous casting. / Dissertation (MEng (Metallurgical Engineering))--University of Pretoria, 2006. / Materials Science and Metallurgical Engineering / MEng / unrestricted

No description available.

Perovskite solar cells exhibit outstanding device performance and photovoltaic potential in recent ten years. However, the photoactive layer of the majority of perovskite solar cells with outstanding efficiency currently contains toxic lead. Although perovskite solar cells will be encapsulated prior to application to enhance the device's stability and prevent lead leakage, it is still possible for the devices to be broken or exposed to the environment during actual use. Correspondingly, Pb may enter water or soil through rainfall, posing health risks to humans and other creatures. To prepare perovskite solar cell devices with both high performance and low toxicity, current research concentrates primarily on Pb-Sn hybrid perovskite solar cells as Sn is less toxic than Pb from an environmental standpoint. To intuitively compare the lead leakage of Pb-based perovskite solar cells and Pb-Sn hybrid perovskite solar cells, this study simulated the lead leakage scenario under heavy rainfall conditions using self-prepared, good-performance solar cell devices. Our results indicate that Pb-Sn hybrid perovskite solar cells have less lead leakage than Pb-based perovskite solar cells. The lead leakage concentration of Pb-Sn hybrid perovskite solar cells was 36.8% (in the dripping test) and 41.2% (in the soaking test) lower than that of Pb-based perovskite solar cells.

No description available.

Solar photovoltaics (PV) is expected to be a critical contributor to mitigating the effects of climate change by helping to satisfy net zero emissions. Since crystalline silicon-based solar cells are close to their practical efficiency limit, further reducing the balance of system (BoS) costs is only possible by increasing the cell efficiencies. The most promising candidate is perovskite/silicon (Si) tandem solar cell technology, which allows efficient solar spectrum harvesting. This relatively new technology attracts attention due to its potential to dominate the PV market; however, it also brings challenges that must be overcome, like stability and scalability concerns. This thesis project focuses on optimizing and characterizing recombination junctions (RJs) for monolithic perovskite/Si tandem solar cells aimed at improved performance and stability. Tandem solar cell PV parameter measurements, encapsulated stability measurements, and thin film characterizations are performed for RJ developments. The optimizations are performed for tandem solar cells with solution-processing and hybrid methods. Self-assembled monolayer (SAM) molecules and transparent conductive oxide (TCO) recombination layer (RL) combinations are optimized to obtain tandems with hybrid technique. In addition, the influence of the thickness of TCO RL on the tandem devices’ performance is also investigated, particularly solution-processed tandems. The improvements are observed by thinning down the thickness of TCOs regardless of the material type. 3 Characterizations revealed that ultra-thin ( 5 nm) amorphous indium zinc oxide (IZO) RL allows more workfunction shift, homogeneous surface potential distribution with SAM deposition, and better carrier recombination suppression at the perovskite/hole transport layer (HTL) interface. Ultra-thin RL idea is combined with some optical improvements in the device architecture, and stable high-efficient perovskite/Si tandem solar cells with 32.5% power conversion efficiency (PCE) and 80% fill factor (FF) values are realized. In addition, the preliminary examples of tandem devices with a larger active area (4 cm2 ) are presented. Finally, the remaining challenges and alternative concepts are also discussed.

京都大学 / 新制・課程博士 / 博士(理学) / 甲第24443号 / 理博第4942号 / 新制||理||1706(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 若宮 淳志, 教授 依光 英樹, 教授 畠山 琢次 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

No description available.