No description available.

No description available.

Solid-state dye-sensitized solar cells (ssDSSCs) and recently developed perovskite solar cells (PSCs) have attracted a great attention in the scientific field of photovoltaics due to their low cost, absence of solvent, simple fabrication and promising power conversion efficiency (PCE). In these types of solar cell, the dye molecule or the perovskite can harvest the light on the basis of electron excitation. Afterwards, the electron and hole are collected at the charge transport materials. Photoelectrochemical polymerization (PEP) is employed in this thesis to synthesize conducting polymer hole transport materials (HTMs) for ssDSSCs. We have for the first time developed aqueous PEP in comparison with the conventional organic PEP with acetonitrile as solvent. This water-based PEP could potentially provide a low-cost, environmental-friendly method for efficient deposition of polymer HTM for ssDSSCs. In addition, new and simple precursors have been tested with PEP method. The effects of dye molecules on the PEP were also systematically studied, and we found that (a) the bulky structure of dye is of key importance for blocking the interfacial charge recombination; and (b) the matching of the energy levels between the dye and the precursor plays a key role in determining the kinetics of the PEP process. In PSCs, the HTM layer is crucial for efficient charge collection and its long term stability. We have studied different series of new molecular HTMs in order to understand fundamentally the influence of alkyl chains, molecular energy levels, and molecular geometry of the HTM on the photovoltaic performance. We have identified several important factors of the HTMs for efficient PSCs, including high uniformity of the HTM capping layer, perovskite-HTM energy level matching, good HTM solubility, and high conductivity. These factors affect interfacial hole injection, hole transport, and charge recombination in PSCs. By systematical optimization, a promising PCE of 19.8% has been achieved by employing a new HTM H11. We believe that this work could provide important guidance for the future development of new and efficient HTMs for PSCs.

This thesis studies parameters influencing both the performance and stability of solid state sensitized solar cells (ssSSCs). ssSSCs benefit from their low materials and manufacturing processing costs, a consequence of using solution processed materials. However, solution processed materials are often structurally and electronically disordered. By characterizing fully operational ssSSCs and their charge transport properties, this thesis elucidates the factors limiting charge transport and proposes routes towards both improved photovoltaic conversion efficiency and long-term stability. Chapter 2 provides an explanation of the operation of ssSSCs, while Chapter 3 discusses the basic methods used in this thesis. Having set this background, Chapter 4 explores the interaction between atmospheric oxygen and charge doping mechanisms in the organic semiconductors used in ssSSCs. To understand the implications of the findings presented in Chapter 4, a new technique, “transient mobility spectroscopy”, was developed to understand the evolution of balanced charge transport behaviour of disordered semiconductors at different operating conditions in ssSSCs. This technique is presented in full in Chapter 5. The understanding gained in Chapters 4 and 5 suggest that alternative light absorbers with higher extinction coefficients may be beneficial to improving the performance of ssSSCs. Chapter 6 discusses the use of an organometal trihalide perovskite, as light absorber in ssSSCs. Using time resolved techniques, the charge transport and recombination mechanisms in various device architectures are explored, allowing suggestions to be made towards future improvements. Chapter 7 uses the technique presented in Chapter 5 to understand a rapid degradation mechanism of working ssSSCs. Particular focus is placed on the titanium dioxide charge-transporting layer. Building on this newfound understanding, two methods for attaining stable photovoltaic performance are provided, a great step forward for this technology.

Metal-halide perovskites show great promise as solution-processable semiconductors for efficient solar cells and LEDs. In particular, the diffusion range of photogenerated carriers is unexpectedly long and the luminescence yield is remarkably high. While much effort has been made to improve device performance, the barriers to improving charge transport and recombination properties remain unidentified. I first explore charge transport by investigating a back-contact architecture for measurement. In collaboration with the Snaith group at Oxford, we develop a new architecture to isolate charge carriers. We prepare thin films of perovskite semiconductors over laterally-separated electron- and hole-selective materials of SnOₓ and NiOₓ, respectively. Upon illumination, electrons (holes) generated over SnOₓ (NiOₓ) rapidly transfer to the buried collection electrode, leaving holes (electrons) to diffuse laterally as majority carriers in the perovskite layer. We characterise charge transport parameters of electrons and holes, separately, and demonstrate that grain boundaries do not prevent charge transport. Our results show that the low mobilities found in applied-field techniques do not reflect charge diffusivity in perovskite solar cells at operating conditions. We then use the back-contact architecture to investigate recombination under large excess of one charge carrier type. Recombination velocities under these conditions are found to be below 2 cm s⁻¹, approaching values of high quality silicon and an order of magnitude lower than under common bipolar conditions. Similarly, diffusion lengths of electrons and holes exceed 12 μm, an order of magnitude higher than reported in perovskite devices to date. We report back-contact solar cells with short-circuit currents as high as 18.4 mA cm⁻², giving 70% external charge-collection efficiency. We then explore the behaviour of charge carriers in continuously illuminated metal-halide perovskite devices. We show that continuous illumination of perovskite devices gives rise to a segregated charge carrier population, and we find that the distance photo-induced charges travel increases significantly under these conditions. Finally, we examine intermittancy in the photoluminescence intensity of metal-halide perovskite films.

La thèse a pour but d’élaborer et d’étudier les potentialités des semi-conducteurs organiques, transporteurs de trous (HTMs) pour l’application photovoltaïque à l’aide de cellules solaires à base de pérovskite (PSCs). Plusieurs familles de molécules HTM ont été préparées et déposées en solution pour l’élaboration des cellules solaires. L'objectif principal étant d'étudier et d’apporter des informations sur la relation entre la structure moléculaire des nouveaux matériaux de transport de trous et les performances photovoltaïques obtenues, cette étude contribue à une meilleure compréhension fondamentale des propriétés requises des matériaux de transport de trous pour de meilleures performances photovoltaïques.La première étude concerne l’élaboration d’une molécule de type p à base de thieno [3,2-b] thiophène comme élément central avec des dérivés de dimethoxytriphenylamine comme donneurs d’électrons aux extrémités. Différentes conformations sont proposées et révèlent des performances photovoltaïques significativement différentes dans les dispositifs PSC. Notons par exemple, qu’une conformation de structure planaire favorisent la conjugaison avec des valeurs élevées de mobilités et conductivités obtenues.Dans la seconde étude, des molécules donneur-accepteurs à base de dérivés d’acridone 9 (10H) comme accepteur ont été élaborés. En y associant différents fragments donneurs d'électrons, on obtient des structures présentant des caractéristiques favorables à la fois pour de bons transferts de charge intramoléculaire (ICT) et des niveaux d’énergie HOMO-LUMO adaptés et favorisant l’injection des trous de la pérovskite vers l’électrode métallique via le HTM. Des études similaires ont été effectuées avec la thioxanthone.A partir d’un précurseur bon marché et d’une préparation aisée, la troisième étude a permis de synthétiser un dérivé de 9,9’-biacridone, molécule push-pull de type p révélant une structure tridimensionnelle, similaire à celle du Spiro-OMeTAD, molécule référence pour les PSCs.Enfin, la dernière étude concerne l’élaboration de molécules donneur-accepteur à base de thiéno [3,4-c] pyrrole-4,6-dione (TPD). La motivation de cette partie est le développement de la molécule à structure planaire améliorant l’empilement π-π dans la fabrication de dispositifs sans joints de grains. Ces molécules possèdent également un fort caractère ICT, une conjugaison π étendue sur toute la structure et une bonne solubilité ce qui en fait un candidat HTM idéal pour la réalisation d’un dispositif PSCs sans dopant. / The aim of the thesis is to develop and study the potential of organic hole transporting materials (HTMs) for photovoltaic applications using perovskite-based solar cells (PSCs). Several families of HTM molecules have been prepared and deposited in solution for the fabrication of solar cells. Since the main objective is to study and provide information on the relationship between the molecular structure of new hole transport materials and the photovoltaic performances obtained, this study contributes to a better fundamental understanding of the required properties of hole transport materials for better photovoltaic performance.The first study concerns the development of p-type molecules based on Thieno [3,2-b] thiophene as a central unit and π-linker with dimethoxytriphenylamine as end-capping electron donors. Different configurations are designed and revealed significantly different photovoltaic performances in the PSC devices. Remarkable, a planar structure with linear conjugation shows higher values of mobility and conductivity than others, thus it improved device performances.In the second study, donor-acceptor molecules based on 9(10H)Acridone derivatives as an acceptor were developed. By incorporating different electron-donating fragments, we obtain structures with favorable characteristics for both good intramolecular charge transfer (ICT) character and adequate HOMO-LUMO energy levels. Their energy levels are suitable for collecting and injecting the holes from perovskite to the metal electrode through the HTM. Similar studies have been done with Thioxanthone.Using a cheap precursor and facile preparation, the third study synthesized a 9.9'-biacridone derivative. These p-type molecules possess a three-dimensional structure which is similar to that of Spiro-OMeTAD, state-of-the-art molecule for PSCs.Finally, the last study focus on the development of donor-acceptor molecules based on thieno [3,4-c] pyrrole-4,6-dione (TPD). The objective is elaboration of the planar structure molecule which could be improved the π-π stacking effect in the device fabrication without grain boundaries. These molecules also own a strong ICT character, an extended π-conjugation on the whole structure and a good solubility which makes it an ideal candidate for the dopant-free HTM in PSCs.

This thesis is about new ways to experimentally realise materials with desired nano-structures for solution-processable optoelectronic devices such as solar cells and light-emitting diodes (LEDs), and examine structure-performance relationships in these devices. Short exciton diffusion length limits the efficiency of most exciton-based solar cells. By introducing nano-structured architectures to solar cells, excitons can be separated more effectively, leading to an enhancement of the cell’s power conversion efficiency. We use diblock copolymer lithography combined with solvent-vapour-assisted imprinting to fabricate nano-structures with 20-80 nm feature sizes. We demonstrate nanostructured solar cell incorporating the high-performance polymer PBDTTT-CT. Furthermore, we demonstrated the patterning of singlet fission materials, including a TIPS-pentacene solar cell based on ZnO nanopillars. Recently perovskites have emerged as a promising semiconductor for optoelectronic applications. We demonstrate a perovskite light-emitting diode that employs perovskite nanoparticles embedded in a dielectric polymer matrix as the emissive layer. The emissive layer is spin-coated from perovskite precursor/polymer blend solution. The resultant polymer-perovskite composites effectively block shunt pathways within the LED, thus leading to an external quantum efficiency of 1.2%, one order of magnitude higher than previous reports. We demonstrate formations of stably emissive perovskite nanoparticles in an alumina nanoparticle matrix. These nanoparticles have much higher photoluminescence quantum efficiency (25%) than bulk perovskite and the emission is found to be stable over several months. Finally, we demonstrate a new vapour-phase crosslinking method to construct full-colour perovskite nanocrystal LEDs. With detailed structural and compositional analysis we are able to pinpoint the aluminium-based crosslinker that resides between the nanocrystals, which enables remarkably high EQE of 5.7% in CsPbI3 LEDs.

This thesis presents a study of hybrid solar cells, specifically looking at various methods which can be employed in order to increase the power conversion efficiency of these devices. The experiments and results contained herein also present a very accurate picture of how rapidly the field of hybrid solar cells has progressed within the past three years. Chapters 1 and 2 present the background and motivation for the investigations undertaken, as well as the relevant theory underpinning solar cell operation. Chapter 2 also gives a brief review of the literature pertinent to the main types of devices investigated in this thesis; dye-sensitised solar cells, semiconductor sensitized solar cells and perovskite solar cells. Descriptions of the synthetic procedures, as well as the details of device fabrication and any measurement techniques used are outlined in Chapter 3. The first set of experimental results is presented in Chapter 4. This chapter outlines the synthesis of mesoporous single crystals (MSCs) of anatase TiO₂ as well as an investigation of its electronic properties. Having shown that this material has superior electronic properties to the conventionally used nanoparticle films, they were then integrated into low temperature processed dye-sensitised solar cells and achieved power conversion efficiencies of > 3%, exhibiting electron transport rates which were orders of magnitude higher than those obtained for the high temperature processed control films. Chapter 5 further investigates the use of MSCs in photovoltaic devices, this time utilising a more strongly absorbing inorganic sensitiser, Sb₂S₃. Utilising the readily tunable pore size of MSCs, these Sb₂S₃ devices showed an increase in voltage and fill factor which can be attributed to a decrease in recombination within these devices. This chapter also presents the use of Sb₂S₃ in the meso-superstructured configuration. This device architecture showed consistently higher voltages suggesting that in this architecture, charge transport occurs through the absorber and not the mesoporous scaffold. Chapters 6 and 7 focus on the use of hybrid organic-inorganic perovskites in photovoltaic devices. In Chapter 6 the mixed halide, lead-based perovskite, CH₃NH₃PbI_3-xCl_x is employed in a planar heterojunction device architecture. The effects of Lewis base passivation on this material are investigated by determining the photoluminescence (PL) lifetimes and quantum efficiencies of treated and untreated films. It is found that passivating films of this material using Lewis bases causes an increase in the PLQE at low fluences as well as increasing the PL lifetime. By globally fitting these results to a model the trap densities are extracted and it is found that using these surface treatments decreases the trap density of the perovskite films. Finally, these treatments are used in complete solar cells resulting in increased power conversion efficiencies and an improvement in the stabilised power output of the devices. Chapter 7 describes the materials synthesis and characterisation of the tin-based perovskite CH₃NH₃SnI₃ and presents the first operational, lead-free perovskite solar cell. The work presented in this thesis describes significant advances in the field of hybrid solar cells, specifically with regards to improvements made to the nanostructured electrode, and the development and implementation of more highly absorbing sensitizers. The improvements discussed here will prove to be quite important in the drive towards exploiting solar power as a clean, affordable source of energy.

No description available.

Perovskite solar cells are part of third generation of solar cells and thanks to their atractive properties they are potencional candidates for replacement of silicon solar cells. Inverted planar structure of perovskite solar cells is possible to prepare by low temperature methods and by solution processing techniques. Main aim of this thesis was to prepare and characterize inverted planar perovskite solr cells with a different modification of structure. Perovskite solar cells was prepared with following structures: reference perovskite solar cells, perovskite solar cells with only a perovskite layer, perovskite solar cell without electron transport and perovskite solar cell without hole transport layer. They were prepared simultaneously by spin coating. Methods used for a characterisation of a parameters of this cells were current-voltage characteristic, impedance spektroskopy, meassure of external quantum efficiency and electrolumiscence. Reference perovskite solar cell reached best results folowed by solar cell without hole transport layer. Lowest results were gained by perovskite solar cell without electron transport layer and perovskite solar cell with only perovskite layer, where increased recombination and acumulation of charge were observed,