241 |
Testing for imperfect competition : the Argentine gasoline market /Serebrisky, Tomas Sebastian. January 2000 (has links)
Thesis (Ph. D.)--University of Chicago, Dept. of Economics, June 2000. / Includes bibliographical references. Also available on the Internet.
|
242 |
Modeling the electrical submersible jet pump producing high gas-liquid-ratio petroleum wells /Carvalho, Paulo Moreira de, January 1998 (has links)
Thesis (Ph. D.)--University of Texas at Austin, 1998. / Vita. Includes bibliographical references (leaves 276-281). Available also in a digital version from Dissertation Abstracts.
|
243 |
Oil and politics in Indonesia, 1945 to 1980Aden, Jean Bush, January 1988 (has links)
Thesis (Ph. D.)--Cornell University, 1988. / Vita. Includes bibliographical references (leaves 524-534).
|
244 |
Modeling the macroeconomic impact of oil Mexico, 1970-1987 /Smith, Villavicencio, Walter J. January 1991 (has links)
Thesis (Ph. D.)--University of Pittsburgh, 1991. / Includes bibliographical references (p. 127-134).
|
245 |
The market structure of international oil with special reference to the Organization of Petroleum Exporting CountriesʻAbd Allāh, Ḥusayn. January 1966 (has links)
Thesis (Ph. D.)--University of Wisconsin, 1966. / Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 299-314).
|
246 |
A system study of the oil and petrochemical industry in Western Europe with special considerations to this future industry in NorwayMikkelsen, Johan Kristian. January 1979 (has links)
Thesis (M.S.)--University of Wisconsin--Madison. / Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 100-102).
|
247 |
OPEC and the experience of previous international commodity cartelsEckbo, Paul Leo January 1975 (has links)
No description available.
|
248 |
Oil gaps, prices and economic growthAdelman, Morris Albert., Jacoby, Henry D. 05 1900 (has links)
M.I.T. World Oil Project. / Research supported by the National Science Foundation under Grant no. SIA75-00739.
|
249 |
Constructing a Niobrara Reservoir Model Using Outcrop and Downhole DataJohnson, Andrew Charles 03 November 2018 (has links)
<p> The objective of this study is threefold: 1) Build a dual-porosity, geological reservoir model of Niobrara formation in the Wishbone Section of the DJ Basin. 2) Use the geologic static model to construct a compositional model to assess performance of Well 1N in the Wishbone Section. 3) Compare the modeling results of this study with the result from an eleven-well modeling study (Ning, 2017) of the same formation which included the same well. The geologic model is based on discrete fracture network (DFN) model (Grechishnikova 2017) from an outcrop study of Niobrara formation.</p><p> This study is part of a broader program sponsored by Anadarko and conducted by the Reservoir Characterization Project (RCP) at Colorado School of Mines. The study area is the Wishbone Section (one square mile area), which has eleven horizontal producing wells with initial production dating back to September 2013. The project also includes a nine-component time-lapse seismic. The Wishbone section is a low-permeability faulted reservoir containing liquid-rich light hydrocarbons in the Niobrara chalk and Codell sandstone.</p><p> The geologic framework was built by Grechishnikova (2017) using seismic, microseismic, petrophysical suite, core and outcrop. I used Grechishnikova’s geologic framework and available petrophysical and core data to construct a 3D reservoir model. The 3D geologic model was used in the hydraulic fracture modeling software, GOHFER, to create a hydraulic fracture interpretation for the reservoir simulator and compared to the interpretation built by Alfataierge (2017). The reservoir numerical simulator incorporated PVT from a well within the section to create the compositional dual-porosity model in CMG with seven lumped components instead of the thirty-two individual components. History matching was completed for the numerical simulation, and rate transient analysis between field and actual production are compared; the results were similar. The history matching parameters are further compared to the input parameters, and Ning’s (2017) history matching parameters.</p><p> The study evaluated how fracture porosity and rock compaction impacts production. The fracture porosity is a major contributor to well production and the gas oil ratio. The fracture porosity is a major sink for gathering the matrix flow contribution. The compaction numerical simulations show oil production increases with compaction because of the increased compaction drive. As rock compaction increases, permeability and porosity decreases. How the numerical model software, CMG, builds the hydraulic fracture, artificially increases the original oil-in-place and decreases the recovery factor. Furthermore, grid structure impacts run-time and accuracy to the model. Finally, outcrop adds value to the subsurface model with careful qualitative sedimentology and structural extrapolations to the subsurface by providing understanding between the wellbore and seismic data scales.</p><p>
|
250 |
Spontaneous Countercurrent and Forced Imbibition in Gas ShalesRoychaudhuri, Basabdatta 13 February 2018 (has links)
<p> In this study, imbibition experiments are used to explain the significant fluid loss, often more than 70%, of injected water during well stimulation and flowback in the context of natural gas production from shale formations. Samples from a 180 ft. long section of a vertical well were studied via spontaneous and forced imbibition experiments, at lab-scale, on small samples with characteristic dimensions of a few cm; in order to quantify the water imbibed by the complex multi-porosity shale system. The imbibition process is, typically, characterized by a distinct transition from an initial linear rate (vs. square root of time) to a much slower imbibition rate at later times. These observations along with contact angle measurements provide an insight into the wettability characteristics of the shale surface. Using these observations, together with an assumed geometry of the fracture system, has made it possible to estimate the distance travelled by the injected water into the formation at field scale. </p><p> Shale characterization experiments including permeability measurements, total organic carbon (TOC) analysis, pore size distribution (PSD) and contact angle measurements were also performed and were combined with XRD measurements in order to better understand the mass transfer properties of shale. The experimental permeabilities measured in the direction along the bedding plane (10<sup> –1</sup>–10<sup>–2</sup> mD) and in the vertical direction (~10<sup>–4</sup> mD) are orders of magnitude higher than the matrix permeabilities of these shale sample (10<sup>–5</sup> to 10<sup> –8</sup> mD). This implies that the fastest flow in a formation is likely to occur in the horizontal direction, and indicates that the flow of fluids through the formation occurs predominantly through the fracture and micro-fracture network, and hence that these are the main conduits for gas recovery. The permeability differences among samples from various depths can be attributed to different organic matter content and mineralogical characteristics, likely attributed to varying depositional environments. The study of these properties can help ascertain the ideal depth for well placement and perforation. </p><p> Forced imbibition experiments have been carried out to better understand the phenomena that take place during well stimulation under realistic reservoir conditions. Imbibition experiments have been performed with real and simulated frac fluids, including deionized (DI) water, to establish a baseline, in order to study the impact on imbibition rates resulting from the presence of ions/additives in the imbibing fluid. Ion interactions with shales are studied using ion chromatography (IC) to ascertain their effect on imbibition induced porosity and permeability change of the samples. It has been found that divalent cations such as calcium and anions such as sulfates (for concentrations in excess of 600 ppm) can significantly reduce the permeability of the samples. It is concluded, therefore, that their presence in stimulating fluids can affect the capillarity and fluid flow after stimulation. We have also studied the impact of using fluoro-surfactant additives during spontaneous and forced imbibition experiments. A number of these additives have been shown to increase the measured contact angles of the shale samples and the fluid recovery from them, thus making them an ideal candidate for additives to use. Their interactions with the shale are further characterized using the Dynamic Light Scattering (DLS) technique in order to measure their hydrodynamic radius to compare it with the pore size of the shale sample.</p><p>
|
Page generated in 0.0424 seconds