221 |
Structural Framework of the Statfjord Formation (Rhaetian-Sinemurian) in the Oseberg South Field, Norwegian North SeaCatterall, Jeffrey John January 2012 (has links)
The Statfjord Formation (Rhaetian-Sinemurian) produces from six fields across the North Sea, but no discoveries have yet been made in the 12 exploration wells across the Oseberg South Field. The field has undergone two major periods of rifting in the Permian-Triassic and from the mid-Jurassic to Early Cretaceous. The Statfjord Formation was deposited during the Permian-Triassic post-rift period, but its tectonic influence on the paleogeography of the formation is not well understood. An isopach map produced from seismic interpretation and RMS modelling of the Statfjord Formation showed a westward thickening trend towards the present-day Viking Graben. This study presents results obtained using new, high-quality OBC seismic data that has allowed for faults throughout the field to be mapped in great detail. Supported by stratigraphic correlations and biostratigraphy, the mapping has showed that most faults can be assigned to either of the main rifting phases or their associated post-rift subsidence histories. Large, east-dipping faults are believed to have originated during the Permo-Triassic rifting, with evidence of movement into the Cretaceous. Large thickness increases of the formation over the westward dipping Oseberg and Brage Faults, as well as syn-rift sediments within some grabens in the J structure indicate movements of these faults during deposition. Biostratigraphic data show that the lowermost part of the Statfjord Formation was approximately the same thickness across the field until the Late Triassic, constraining the initiation of the Oseberg and Brage Faults to the Early Jurassic. Interpretations from timelines correlated within the Statfjord Formation suggest that the rate of subsidence along different faults was not consistent through time. Thickness changes along strike of the fault indicate that the movement along the fault was diachronous. This study aims to show that major fault activity influenced the deposition, and possibly preservation potential of sediment in the Statfjord Formation. The second phase of rifting is believed to have initiated many of the faults within the field, as well as reactivated the Oseberg and Brage Faults. Additional NW-SE faults in the Omega structure show no evidence of syn-rift sediments at the Statfjord Formation level, suggesting a mid-Jurassic post-rift origin. Similarly oriented faults were seen in the C structure, however, the presence of syn-rift sediments was difficult to ascertain, and no conclusions about the timing of initiation were made.
|
222 |
Mapping of shallow Tunnel Valleys combining 2D and 3D Seismic DataHalvorsen, Hanne Sundgot January 2012 (has links)
In this study 19 tunnel valleys within block 2/4 in the central North Sea basin have been mapped. Furthermore, the possibility for these valleys to act as migration paths for leaked gas has been evaluated. In January 1989 a kick occurred while drilling well 2/4-14 in the area of study, hence the pertinence of evaluating this hypothesis at this locality is evident. The work has been performed using multichannel 2D lines and a conventional 3D seismic survey. The quality of the 2D and 3D data is clearly dissimilar at shallow burial depths, as the 2D data is considered to be high-resolution while the 3D data is low-resolution. However, both data sets have proved to give valuable information on the valley morphology. Great details about the extent and basal morphology have been retrieved from the conventional 3D volume; whereas seismic characteristics of the valley infill have been interpreted from the 2D lines. Tunnel valleys are major, elongated incisions carved into sediments or permeable bedrock during glaciations. They tend to be sinuous in planform, but might also appear as straight valleys. Tunnel valleys often consist of several cut- and fill-structures, both laterally and vertically, and thus form a network of interconnected valleys. This has also been observed in the area of study. No sedimentological logs have been available in the study. Hence, the interpretations of valley fill lithologies are based on the seismic characteristics, and thereby they are quite cautious. The typical fill sequence observed correlates fairly good with similar valleys mapped in the area previously. A lower part of chaotic reflectors, believed to be glaciofluvial sands and gravels, is overlain by sub-horizontal layers of glaciomarine mud. Moreover, velocity pull-up effects are seen in the underburden of some of the valleys. These indicate relatively high velocities of the infill sediments, and hence, it is likely to be clayey tills. Even so, the possibility of gas migration within the tunnel valley system is believed to be conspicuous.
|
223 |
Well Log and Seismic Data Interpretation : Rock Physics Study of Poorly Consolidated Sandstones in The North SeaFanka, Walter Roye Taju January 2012 (has links)
We use rock physics models for poorly consolidated rocks to diagnose reservoir sandstones in the Alvheim Field, North Sea. Geological factors that will control the rock physics and seismic properties include clay content, sorting, diagenesis, mineralogy, and bedding configuration. The various geologic factors will affect the fluid and stress sensitivity in these rocks. We investigate the interrelationships between various geological factors and seismic fluid and stress sensitivity, by combining well log data and rock physics models. Finally, we determine inter-well characteristics in terms of varying geological factors at different locations and discuss the results in terms of expected seismic signatures in the area.
|
224 |
Applying Time-Lapse Seismic Inversion In Reservoir Management: A Case Study Of The Norne FieldAmmah, Anass Nii-Armah January 2012 (has links)
Time-lapse seismic inversion approach to reservoir management has proven to be a vital tool in the industry today because of its effectiveness in tracking the movement of fluid front within the reservoir as well as identifying isolated bypassed accumulations. A base (2001) and three monitor (2003, 2004 and 2006) seismic surveys from the Norne field were inverted during this research. Water and gas have been injected into the reservoir to maintain the initial pressure within the field. These seismic surveys were analyzed for time-lapse impedance changes due to the differences in the produced hydrocarbons and the injected fluids. Check-shot corrected well data as well as interpreted horizons were integrated in the inversion process. Two independent wavelets were extracted from base and monitor surveys and combined to form an all-encompassing frequency and amplitude wavelet. The base and monitors were jointly inverted. This is because of the reduction in inconsistencies that are associated with independent inversions of surveys and the production related changes expected in time-lapse inverted seismic data.The results of the inversion show the impedance difference across the field for the various monitor surveys. Areas surrounding producer wells show slight changes in impedance while great impedance difference are observed around injector wells. A statistical analysis of the inversion results also shows steady increase in impedance across the field for the subsequent monitors. Structural and stratigraphic interpretation of the time-lapse inverted data also confirmed the sealing properties of some formations. This sealing property supported the impedance changes within the field. Fault interpretations as well as its sealing and non-sealing properties were inferred from the impedance differences across various discontinuities. Time-lapse acoustic impedance inversion of the Norne post-stack seismic data has revealed the impacts of production, dynamic fluid changes across main identified geologic structures, fluid front migration, fluid communication across structures and segments and other identified stratigraphic elements.
|
225 |
Structural Interpretation and Investigation of the Displacement Gradients of the Normal Fault System beneath the Horda Platform, the northern North SeaKaenmee, Kwanjai January 2012 (has links)
The North Sea basin is one of the best-studied areas in the world with respect to thestructural and sedimentary architecture of rift zones. The Base Cretaceous Unconformity,which defines a mappable horizon at the transition from synrift to postrift sequencesassociated with the Jurassic–Cretaceous rift, is well known as a reference marker for bothseismic and well log interpretations and covers most of the basin. This unconformity isinterpreted at the locations of the Øygarden Fault Zone, the Troll Fault Block, the NorthViking Graben, the Tampen Spur, the Snorre Fault Block, the Sogn Graben and the HordaPlatform. The complexities of the unconformity have been established and vary with thestructural and geographical position within the basin. However, as the Base CretaceousUnconformity covers most of the northern North Sea, its structural time map, is used to derivethe picture of post-structural framework of a rift basin and to locate essential structures in thedeeper sections.Three main reflectors (Pre-Jurassic 1, Pre-Jurassic 2 and Top seismic basement)located beneath the Base Cretaceous Unconformity on the Horda Platform, and have beeninterpreted using 2D seismic reflection data. These three reflectors have been studied in orderto investigate in detail the displacement gradients and possible linkage of the early faultsystem under the Horda Platform, and to evaluate their effect on the large-scale sedimentarchitecture. A main reason to work on the structures under the Horda Platform is due to thefact that these structures are believed to have existed already in the early stages of thenorthern North Sea basin development.The extensional normal fault systems of both the Permo-Triassic and the Late Jurassicrifts are considered a key control on the geological structures and sedimentary architecture ofthe region as presently seen. The basin evolution related Permo-Triassic rifting is mostpronounced on the eastern part of the Horda platform where its synrift geometry is obviouslyseen with the huge segment length and largest uplift explainable by a flexural stretchingmodel. The rift axis is transferred to position at base of the Viking graben during the Late-Jurassic rifting with the smaller magnitude of extension than the Permo-Triassic as clearlyseen by the less thickness of the synrift geometry. However, the structural evolution of normalfaults and the basin architecture under the Horda Platform is particularly affected by thecomplex interaction of fault linkage, fault propagation, fault growth, and death of faultthrough times from the early stage to the final stage of the basin development. Apart from theeffects of major tectonic controls, additionally, non-tectonic parameters, such as climate, seaor lake level changes, and differences in amount and type of sediment supply, should be takeninto account to influence the stratigraphic and sedimentation patterns in the basin.
|
226 |
The British North Sea : the importance of and factors affecting tax revenue from oil production /Hill, Mark Thomas, January 2003 (has links) (PDF)
Thesis (M.A.)--Brigham Young University. David M. Kennedy Center, 2003. / Includes bibliographical references (p. 82-85).
|
227 |
Identification of possible human errors that can result in fires/explosions during tankers' cargo loading/unloading operations at the XYZ marine petroleum terminalTriana Cedeno, Guillermo A. January 2000 (has links) (PDF)
Thesis--PlanB (M.S.)--University of Wisconsin--Stout, 2000. / Field problem. Includes bibliographical references.
|
228 |
The evaporation of crude oil and petroleum productsFingas, Mervin F. January 1996 (has links)
The physics of oil and petroleum evaporation are investigated. Literature on oil spill evaporation shows that most workers use boundary-layer equations adapted from water evaporation work. These equations predict a constant evaporation mass-transfer rate, dependent on scale size and wind speed. Evaporation was studied further by measuring evaporation of commercial oil products. An experimental apparatus for the study of evaporation was developed. Evaporation was determined by weight loss measured on a balance and recorded constantly on a computer. Examination of the data shows that most oil and petroleum products evaporate at a logarithmic rate with respect to time. This is attributed to the overall logarithmic appearance of many components evaporating at different linear rates. Petroleum products with fewer chemical components such as diesel fuel, evaporate at a rate which is square root with respect to time. The particular behaviour is shown to be a result of the number of components evaporating. Oils with greater than seven to ten components can be predicted with logarithmic equations, those with three to seven components, with square root equations. Evaporation of oils and petroleum products is not strictly boundary-layer regulated. This is largely a result of the high saturation concentrations of oil components in air, which is associated with a high boundary-layer regulated rate. Typical oil evaporation rates do not exceed that of molecular-diffusion, and thus turbulent diffusion does not increase the evaporation rates. Some volatile oils and petroleum products show some effect of boundary-layer regulation at the start of the evaporation process, but after several minutes, evaporation slows because of the loss of the more volatile components, at which point evaporation ceases to be boundary-layer regulated. Overall, boundary-layer regulation can be ignored in the prediction of oil and petroleum evaporation. A simple equation relating only the logarithm of t
|
229 |
Designing primary hydrocarbon production separation systems : a mathematical programming formulationGrodal, Evert Olaus 05 1900 (has links)
No description available.
|
230 |
The organic geochemical correlation of crude oils from early Jurassic to late Cretaceous Age reservoirs of the Eromanga Basin and late Triassic Age reservoirs of the underlying Cooper Basin /Jenkins, C. C. January 1987 (has links) (PDF)
Thesis (M. Sc.)--University of Adelaide, Dept. of Geology and Mineralogy, 1988. / Includes bibliographical references (leaves [1-13]).
|
Page generated in 0.0441 seconds