Thesis (Ph.D.)--Baylor University, 2007. / Includes bibliographical references (p. 85-95).

Thesis (M.Sc. (Chemistry)) - Rhodes University, 2008

Thesis (M.Sc. (Chemistry)) - Rhodes University, 2008.

Thesis (Ph. D.)--Ohio State University, 2009. / Title from first page of PDF file. Includes vita. Includes bibliographical references (p. 167-180).

Thesis (M.Sc. (Chemistry)) - Rhodes University, 2007.

This thesis explored use of metallophthalocyanines as electrocatalysts towards thiol and thiocyanate oxidation, nitrosothiol decomposition and reduction of oxygen, as well as biomimetic and photo-catalysts of cyclohexene oxidation. 2-mercaptoethanol (2-ME), L-cysteine (CYS) and reduced glutathione (GSH) thiols were oxidized on cobalt tetra ethoxythiophene and cobalt tetra phenoxy pyrrole phthalocyanine modified glassy carbon electrodes, whose catalytic activity was found to depend on pH, film thickness and method of electrode modification. Oxidation of thiocyanate (SCN-), CYS and 2-ME was catalyzed by a selfassembled monolayer of cobalt tetraethoxythiophene Thiocyanate oxidation occurred via two electron transfer, whereas that of CYS and 2-ME required 1 electron. The oxidations of SCN- and 2-ME were catalyzed by ring based processes, while CYS was catalyzed by both Co[superscript III]/Co[superscript II] process and ring-based processes. Oxidation of GSH and 2-ME was conducted on screen printed graphite electrodes modified with cobalt phthalocyanine. Activity depended on method of electrode modification and CoPc % composition. Decomposition of Snitrosoglutathione occurred in the presence of copper ions and NaBH[subscript 4]. Reduced and oxidized glutathione were detected as products using cobalt phthalocyanine adsorbed on an ordinary pyrolytic graphite electrode. Reduction of oxygen was electro-catalyzed by adsorbed manganese phthalocyanine complexes on glassy carbon electrodes. FePc, FePc(Cl)[subscript 16], CoPc and CoPc substituted with phenoxypyrrole and ethoxythiophene ligands were also used as electro-catalysts. Oxygen reduction occurred via two electron transfer in acidic and neutral media forming hydrogen peroxide, while water was formed in basic media via four electron transfer. Cyclohexene oxidation using tert-butylhydroperoxide or chloroperoxy benzoic acid as oxidants in the presence of FePc, FePc(Cl)[subscript 16] and CoPc formed cyclohexene oxide, 2-cyclohexen-1-ol, 2- cyclohexen-1-one and adipic acid. Product selectivity depended on the nature of catalyst and oxidant. The FePc(Cl)[subscript 16] catalyst was transformed into a µ-oxo dimer during the oxidation process while M[superscript III]Pc intermediates were formed with Co[superscript II]Pc and Fe[superscript II]Pc catalysts. Cyclohexene photooxidation catalyzed by zinc phthalocyanine using either red or white light formed 2-cyclohexen-1-one, 2-cyclohexen-1-ol, transcyclohexane diol, cyclohexene oxide and cyclohexene hydroperoxide via singlet oxygen and radical mechanisms. Product yields depended on the light wavelength and intensity, solvent, irradiation time and the rate of photodegradation of the catalyst.

Photodegradation of 4-nitrophenol (4-Np) in the presence of water-soluble zinc phthalocyanines and water-insoluble metallophthalocyanines is reported. The water-soluble phthalocyanines employed include zinc tetrasulphophthalocyanine (ZnPcS[subscript 4]), zinc octacarboxyphthalocyanine (ZnPc(COOH)[subscript 8]) and a sulphonated ZnPc containing a mixture of differently sulphonated derivatives (ZnPcS[subscript mix]), while the water-insoluble phthalocyanines used include unsubstituted magnesium (MgPc), zinc (ZnPc) and chloroaluminium (ClAlPc) phthalocyanine complexes and the ring-substituted zinc tetranitro (ZnPc(NO[subscript 2])[subscript 4]), zinc tetraamino (ZnPc(NH[subscript 2])[subscript 4]), zinc hexadecafluoro (ZnPcF[subscript 16]) and zinc hexadecachloro (ZnPcCl[subscript 16]) phthalocyanines. The most effective water-soluble photocatalyst is ZnPcS[subscript mix] in terms of the high quantum yield obtained for 4-Np degradation (Φ[subscript 4-Np]) as well as its photostability. While ZnPc(COOH)[subscript 8] has the highest Φ[subscript 4-Np] value relative to the other water-soluble complexes, it degrades readily during photocatalysis. The Φ[subscript 4-Np] values were closely related to the singlet oxygen quantum yields Φ[subscript Δ] and hence aggregation. The rate constants for the reaction with 4-Np were kr = 0.67 x 10[superscript 6] mol[superscript -1] dm[superscript 3] s[superscript -1] for ZnPcS[subscript mix] and 7.7 x 10[superscript 6] mol[superscript -1] dm[superscript 3] s[superscript -1] for ZnPc(COOH)[subscript 8]. ClAlPc is the most effective photocatalyst relative to the other heterogeneous photocatalysts for the phototransformation of 4-Np, with 89 ± 8.4 % degradation of 4-Np achieved after 100 min. The least effective catalysts were ZnPcCl[subscript 16] and MgPc. The final products of the photocatalysis of 4-Np in the presence of the homogeneous photocatalysts include 4-nitrocatechol and hydroquinone, while degradation of 4-Np in the presence of the heterogeneous photocatalysts resulted in fumaric acid and 4-nitrocatechol. ClAlPc was employed for the heterogeneous photocatalysis of the non-systemic insecticide, methyl paraoxon. Complete degradation of the pesticide was confirmed by the disappearance of the HPLC trace for methyl paraoxon after 100 min of irradiation with visible light. The removal of 4-Np from an aqueous medium using commercially available Amberlite[superscript ®] IRA-900 modified with metal phthalocyanines was also investigated. The metallophthalocyanines immobilised onto the surface of Amberlite[superscript ®] IRA-900 include Fe (FePcS[subscript 4]), Co (CoPcS[subscript 4]) and Ni (NiPcS[subscript 4]) tetrasulphophthalocyanines, and differently sulphonated phthalocyanine mixtures of Fe (FePcS[subscript mix]), Co (CoPcS[subscript mix]) and Ni (NiPcS[subscript mix]). Adsorption rates were fastest for the modified adsorbents at pH 9. Using the Langmuir-Hinshelwood kinetic model, the complexes showed the following order of 4-Np adsorption: CoPcS[subscript mix] > NiPcS[subscript 4] > NiPcS[subscript mix] > FePcS[subscript 4] > FePcS[subscript mix] > CoPcS[subscript 4]. The adsorbents were regenerated using dilute HNO[subscript 3], with 76 % (7.6 x 10[superscript -5] mol) of 4-Np recovered within 150 min.

The synthesis, spectroscopic characterization, and studies of the photophysicochemical behaviour of selective anionic, cationic and neutral metallophthallocyanine (MPc) complexes were carried out and the results are presented herein. Studies on the effect of the central metal ion, the solvent used and the presence of nanoparticles on the photophysicochemical properties were conducted. The findings showed that the photophysicochemical parameters were mostly enhanced in the presence of central metal ions of high atomic numbers and also in the presence of nanoparticles. It was also observed that solvents that encouraged the monomericity of the MPc complexes also lead to improved photophysical and photochemical behaviour. CdTe quantum dots (QDs) stabilized with mercaptocarbonic acids were also observed to cause stimulated emission of the MPcs through Förster resonance energy transfer (FRET) thus acting as energy donors while the respective MPc acted as energy acceptors in all the FRET studies. FRET was observed following the photoexcitation of QDs for all monomeric anionic MPcs but it was also shown to occur for some cationic MPcs in organic media. Both the substituent and solvent used were found to exert a strong influence on the occurrence of FRET. Other cationic MPcs however showed different behaviour in the presence of the meraptocarbonic stabilized CdTe QDs; with the cationic porphyrazine giving clear indications of Pc ring reduction. The rest of the cationic MPcs did not give clear evidence of Pc ring reduction, instead they showed signs of aggregate formation possibly from the assembly of electrostatic ion pair complexes which could result in reduction of the quaternized pyridinium ring of the substituent. Both the QDs and the MPc complex emission spectra were significantly quenched for each in the presence of the other. Stern-Volmer quenching studies indicated that both static and dynamic quenching of the QDs in the presence of MPcs took place. The fluorescence lifetimes of the mercaptopropionic acid (MPA) capped CdTe QDs in the presence of various MPc complexes showed quenching of mostly the longer lifetimes of the QDs in the presence of MPcs suggesting that the surface defects and states are involved in the interaction of the QDs and MPcs. An MPc complex terminating in thio tethers was employed in the conjugation to AuNPs. Spectroscopic and microscopic studies confirmed the formation of the MPc-AuNP conjugate which was also shown to exhibit improved photophysicochemical properties compared to the free MPc.

Syntheses of various octasubstituted open-shell (Ni(II), Pd(II) and Pt(II)) metallophthalocyanines and their metal-free analogues have been carried out. Spectroscopic characterizations, photophysical and photochemical studies were carried out to determine the effects of these metals on the molecules using the metal-free phthalocyanine analogues as benchmark. Metal-binding studies of few thio-derivatised phthalocyanines were done to increase the number of palladium metal on the phthalocyanine ligands and determine the effect of increasing number of this metal on phthalocyanine properties. Palladium (PdPc) and platinum phthalocyanines (PtPc) gave good triplet and singlet oxygen quantum yields making them suitable for further investigation in application as photosensitisers. Using 4-nitrophenol as model pollutant, photosensitization reactions were carried out under homogenous and heterogeneous conditions. The reactions were monitored using UV-vis spectroscopy. The MPcs were adsorbed on functionalized single wall carbon nanotube (SWCNT-COOH) to form heterogeneous photosensitizers with PtPc failing to adsorb on the SWCNT-COOH. Under the heterogeneous condition, all the PdPcs photosensitization kinetics was consistent with Langmuir-Hinshelwood reaction model. The best photosenstiser, β-palladium dodecylthio phthalocyanine was also deployed in sensitization of oxidation of 4-chlorophenol and pentachlorophenol under homogenous and heterogeneous conditions to establish the ability of the molecules to sensitize oxidation of wide range of phenolic pollutants. Identifications of the products of the reactions were conducted using gas chromatography and high pressure liquid chromatography (HPLC) hyphenated with mass analyzer (LC-MS). Mechanisms of all the reactions were investigated and all the complexes, in spite of reduced lifetime resulting from open-shell nature of the metals, sensitized the reactions through singlet oxygen mediated pathway. All the heterogeneous sensitisers were recyclable in the 4- nitrophenol oxidation but β-palladium dodecylthio phthalocyanine proved unrecyclable in the oxidation of pentachlorophenol.

The potential toxicity of seven different types of quantum dots without shell (L-cysteine-CdTe, TGA-CdTe, MPA-CdTe, TGA-CdSe) and with the shell (GSH-CdSe@ZnS, GSH-CdTe@ZnS,) with different capping agents were evaluated. The growth inhibitory effects of the various quantum dots on human pancreatic BON cancerous cells were determined. The least cytotoxic of the various quantum dots synthesized and the one displaying the lowest growth inhibitory potential and no embryotoxicity was determined to be the GSH-CdSe@ZnS quantum dots. The GSH-CdSe@ZnS quantum dots were then conjugated to gallium, aluminium and indium octacarboxy phthalocyanine and the photophysical behaviour of the conjugates studied for potential use in photodynamic therapy and imaging applications. The sizes, morphology, thermal stability and confirmation of successful conjugation was determined using X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR), respectively. The study was extended by conjugating amino functionalized magnetic nanoparticles (Fe₃O₄) to indium octacarboxy phthalocyanine to study the photophysical behaviour of the conjugate as a potential bi-functional anti-cancer agent (hyperthermia and photodynamic therapy applications). A three-in-one multifunctional nanocomposite comprising of the quantum dots, magnetic nanoparticles and indium octacarboxy phthalocyanine was developed with the aim of developing a multifunctional composite that is able detect, monitor and treat cancer. All conjugates showed improved and enhanced photophysical behaviour. Finally, GSH-CdSe@ZnS conjugated to aluminium octacarboxy phthalocyanine was applied in human pancreatic carcinoid BON cells. The conjugates induced cell death dose-dependently.