Oscillating heat pipes (OHPs) have been actively investigated since their inception due to their ability to manage high heat/heat fluxes. The OHP is a passive, wickless, two-phase heat transfer device that relies on pressure driven fluid oscillations within a hermetically-sealed serpentine channel structure. The cyclic phase-change heat transfer drives additional sensible heat transfer, and this combination causes OHPs to have high effective thermal conductivities. Many strides have been made, through both experimentation and modeling, to refine the design and implementation of OHPs. However, the main objective in OHP research has been to better understand the thermodynamic and fluid mechanic phenomena so as to enhance OHPs' thermal performance. The current work presents methods for using OHP in thermal-to-electric energy harvesting, which would allow for ‘dual-purpose’ OHP applications in which thermal management can be combined with work output. Energy harvesting occurred when a portion of the thermally-driven fluidic motion was used to generate a voltage either by electromagnetic induction or by a piezoelectric transducer imbedded in an OHP tube. For the induction approach, two methods were used to create the time-varying magnetic field required for induction. In the first, a ferrofluid was used as the OHP working fluid. Because the magnetic dipoles of the nanoparticles are randomly aligned naturally, two static, external ‘bias’ magnets were required to create a uniform magnetic field to align the particle dipoles for a non-zero magnetic flux change through a coaxial solenoid. The second method used a small rare-earth magnet confined inside a set length of an OHP channel that had a coaxial solenoid. As the OHP working fluid moved inside the harvesting channel, a portion of the fluid's momentum was transferred to the magnet, causing it to oscillate. For the piezoelectric approach, a narrow piezoelectric transducer was placed in a bow-shaped configuration along the inside of an OHP channel. Passing fluid would deflect the piezo creating a potential difference across its leads, which protruded out of the channel walls. All three of these methods successfully produced a voltage while retaining the excellent thermal performance synonymous with OHPs.

An experimental study of turbulent air flow in a pipe is reported in this paper. A determination was made of the mean velocity distribution and longitudinal mean turbulent velocity distribution, both in the turbulent core and boundary layer for four different Reynolds numbers from 7300 to 58300. A traversing mechanism was designed in order to measure the turbulence correlations between two points. The variation of the macro scale length, one of the fundamental quantities in recent statistical turbulence theory across the pipe diameter was calculated for Reynolds number equal to 58300, by integrating the correlation curves. The turbulent momentum diffusivity at the center of a pipe was calculated from the correlation study and the dimension less value was found to be 0.111. Ethylene gas was injected into the center of the pipe, and in order to investigate the turbulent mass diffusivity, the concentration distribution curves of ethylene were measured at different test positions downstream from the injection point, for the same series of Reynolds numbers used in the turbulence measurement. A numerical method for calculating the diffusivity was developed. The values of diffusivity obtained. in these experiments show that the assumptions which were used by most of the authors, that of (turbulent mass diffusivity/turbulent momentum diffusivity) has a value between 1.0 to 1.6 is correct. / Thesis / Master of Engineering (ME)

No description available.

No description available.

No description available.

No description available.

No description available.

An examination of various methods for mass flow rate measurements was undertaken to evaluate their applicability for measuring refrigerant R-134a two-phase mass flow in refrigeration and air-conditioning equipment. An experimental apparatus was constructed to generate the required two-phase flow conditions. A turbine and a venturi flowmeter were used together with either a capacitance transducer or a gamma densitometer to determine the two-phase mass flow rate. The time-averaged void fraction was measured using a capacitance transducer and a gamma densitometer. Their measurements were in good agreement. Hence, for mass flow rate measurements, the capacitance transducer was used as the void fraction meter because of its ease of operation. A number of models were used to combine the output of either the turbine flowmeter or the venturi flowmeter, with the void fraction measurement to estimate the mass flow rate. It was found that, within the range of experimental data tested in the present work, the venturi flowmeter, in conjunction with Chisholm's model, provided the best agreement with the experimental results. / Thesis / Master of Engineering (MEngr)

While more than 100 years of research has focused on removing acute and chronic health threats from water, substantially less study has focused on potable water infrastructure and water quality deterioration, monitoring technologies, and relationships between water taste and consumer health. These knowledge–gaps have left infrastructure users, owners, regulators, and public health professionals largely unaware of how premise and buried polymer water pipes deteriorate and sorb/ desorb organic contaminants during normal operations and following water contamination events. These knowledge–gaps also prevent infrastructure managers from producing drinking water that optimizes mineral content for both water taste and health benefits, and employing a monitoring tool capable of immediately detecting water contamination or equipment failures. Research was conducted to address these challenges using analytical chemistry, environmental engineering, food science, polymer chemistry, public health, and material science principles. This work was enhanced by collaborations with sixteen American water utilities and the National Institute for Standards and Technology. These efforts were funded by the National Science Foundation, American Water Works Association, and the Water Research Foundation. Research results are unique and provide important scientific contributions to the public health, potable water, and material science industries. Particular achievements include the: (1) Evaluation of linkages between minerals, water palatability, and health useful for water production and public health decisions; (2) Creation of a novel infrastructure and water quality surveillance tool that has begun water utility implementation in the USA; (3) Development of an accelerated chlorinated water aging method with stable water pH, free chlorine, and alkalinity concentration that enables interpretation of polymer pipe surface and bulk characteristic changes; (4) Discovery that polar compounds are 2–193% more soluble in PEX than HDPE water pipes; (5) Finding that several polymer and contaminant properties can be used to predict contaminant diffusivity and solubility during sorption and desorption in new, lab aged, and water utility PE pipes; and the (6) Discovery that chlorinated water exposure of HDPE and PEX pipes increases polar contaminant diffusivity during sorption by 50–162% and decreases diffusivity during desorption as much as 211%. Outcomes of this work have domestic and global significance, and if engaged, can greatly improve public health protection, potable water infrastructure operations, water quality, sustainability, and regulation. / Ph. D.

The possible effects of pipe materials on drinking water quality have been analyzed in the distribution system of the water treatment plant of "La La Concepciónâ " in Tegucigalpa, Honduras. "La La Concepciónâ " is a surface water reservoir experiencing biogeochemical cycling of manganese. Black water problems have been reported in the distribution system since 1998. An evaluation of the potential influence that PVC and iron pipes could have on the concentration of iron and manganese in drinking water, the effects caused by the presence of manganese in PVC and iron pipe surfaces, and residual chlorine and Pb concentrations in the distribution system was performed. The sampled neighborhoods received an intermittent service. Water was suspended for 8 hours every day due to water quantity problems in the city. Water and pipe samples were obtained for PVC and galvanized iron pipes because these constitute the majority of the infrastructure used for distribution systems in Honduras. Thermodynamic and kinetic conditions for possible manganese oxidation by chlorine and dissolved oxygen in the distribution system were also evaluated. As expected, total Fe concentrations were greater for first flush conditions from the iron pipe. Water samples obtained from the PVC pipe showed higher total Mn concentrations and more black color than those obtained from the iron pipe for both first flush and continuous flow conditions. Residual chlorine decayed relatively fast along the sampled section of the distribution system. Pb concentrations were detected on water samples obtained from PVC for first flush and continuous flow and on iron pipe for first flush. Preliminary experiments showed that manganese-oxidizing and -reducing bacteria were present in the walls of both PVC and iron pipes. Higher numbers of colony-forming microorganisms were recovered from iron (30-fold more) compared to PVC pipe sections. However, the majority of isolates from the PVC biofilm (8 of 10, 80 %) were capable of Mn-oxidation while only 35 % (11 of 31) of isolates from the iron biofilm sample demonstrated Mn-oxidation. This research demonstrates the importance of the different interactions between water and the infrastructure used for its supply in producing safe drinking water. / Master of Science