Made available in DSpace on 2014-06-11T19:25:31Z (GMT). No. of bitstreams: 0 Previous issue date: 2005-03-01Bitstream added on 2014-06-13T18:28:55Z : No. of bitstreams: 1 saggioro_bz_me_rcla.pdf: 2011105 bytes, checksum: 3a55198b06d17033aac4826618ba3503 (MD5) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Superfícies de vidro plano comercial (flotado) e de vidros sintetizados no laboratório com diferentes concentrações em massa de SnO2 foram expostos aos vapores resultantes da decomposição de KNO3 fundido a uma temperatura um pouco abaixo da temperatura de transição vítrea. Medidas de EDS mostram um aumento da concentração dos íons K+ na superfície com o aumento do tempo de exposição aos vapores. Alguns destes íons migraram para o interior dos vidros, conforme mostram as medidas do perfil de concentração. Os coeficientes de difusão foram determinados utilizando a técnica de Bolztzman-Matano. Esta mudança na concentração de K+ provocou modificações estruturais na superfície, alterando algumas de suas propriedades físico-químicas. Espectros de reflexão no infravermelho foram realizadas nestas amostras e mostraram que as alterações mais pronunciadas ocorreram na banda em tono de 950 cm-1. A dureza Vickers aumenta com o tempo de exposição. O índice de refração foi determinado pelos métodos de Brewster e refratometria Abbe. Constatou-se que quanto maior o tempo de exposição aos vapores, maior o valor do índice de refração das amostras. Foi verificado se esta nova técnica de troca iônica, isto é, por exposição a vapores, é propicia na preparação de dispositivos baseados em guias de ondas planares, utilizando a técnica de acoplamento de prisma. Vidros sintetizados também foram submetidos a testes de dilatometria com o intuito de determinar a temperatura de transição vítrea e calcular o coeficiente de expansão térmica. Medidas de densidade foram realizadas utilizando o principio de Arquimedes. Há diversas evidências experimentais que o estanho incorporado à estrutura vítrea atua como cátion formador de vidros, e que inibe a difusão iônica. / Surfaces of commercial plane glass (floated) and glasses synthesized in laboratory with different concentrations of SnO2 were exposed to vapors resulting from the decomposition of molten KNO3 at temperatures somewhat below the glass transitions. EDS measurements show an increase of the K+ concentration at the surfaces during the time of exposition to the vapors. Some of these ions migrate into the near surface layers of the samples, according to the measured concentration profiles. Diffusion coefficients were determined using the Bolztzman-Matano technique. The changes in concentration promote structural modifications at the surfaces, changing some of the physico-chemical properties of the glasses. Reflectance spectra in the infrared were carried out in these samples and one observe that the most pronounced change occurred around 950 cm-1. The Vickers hardness increases with the exposition time. The refractive index was determined by Brewster method and by Abbe refractometry. The longer the time of exposition to the vapors, the higher was the refractive index of the samples. This new technique of ionic exchange, that is, the exposition to vapors, was tested to verify if it is appropriate to prepare planar waveguide devices, and the coupling prism method was employed. Synthesized glasses were also subjected to dilatometric tests in order to determine the glass transition temperature, Tg, and the average thermal expansion coefficient, a. Density measurements were performed using Archimedes principle. There are several experimental evidences that tin is incorporated in the glass structure as a glass former cation, and it hinders ionic diffusion.

Dans cette thèse nous étudions les propriétés d'ondes stationnaires dans des structures composées d'une couche diélectrique nonlinéaire de type Kerr et des couches métalliques et diélectriques linéaires. Nous élaborons différents modèles pour étudier les propriétées de plasmons-solitons dans deux types de structures : (i) une région diélectrique nonlinéaire semi-infinie, des couches de métal et de diélectrique linéaires et (ii) une couche de diélectrique nonlinéaire d'épaisseur finie entre deux régions métalliques (guide d'onde métallique à coeur nonlinéaire). Pour le premier type de structures, nous montrons qu'en utilisant une structure à quatre couches, il est possible d'obtenir des plasmons-solitons de basses puissance. Pour des guides d'onde métalliques à coeur nonlinéaire, nous trouvons de modes d'ordres supérieurs. Pour certains des modes symétriques, nous observons une bifurcation par brisure de symétrie donnant naissance à des modes asymétriques dans une structure symétrique. / In this PhD thesis, we study the properties of stationary transverse magnetic polarized waves in structures composed of a Kerr-type nonlinear dielectric layer, metal and linear dielectric layers. We develop several models to study the properties of plasmon-soliton waves in two types of structures: a semi-infinite nonlinear dielectric in contact with metal and linear dielectric layers and a finite-size nonlinear dielectric layer sandwiched between two metal regions (nonlinear slot waveguide). Our models allow us to compute the nonlinear dispersion relations and the corresponding field profiles. For the first type of structure, we prove that using the four-layer structures that we propose, it is possible to obtain plasmon-soliton waves at the power levels. For nonlinear slot waveguide structures, we discover the existence of new, higher order modes. For some of the symmetric modes, we observe a symmetry breaking bifurcation giving birth to asymmetric modes in symmetric structure.