1 |
Adaptive process control for stabilizing the production process in injection moulding machinesSchiffers, Reinhard, Holzinger, Georg P., Huster, Gernot 02 May 2016 (has links) (PDF)
Plastic injection moulding machines are a positive example of the possibilities in terms of performance and energy efficiency of modern hydraulic drives technology. In addition to the performance and energy efficiency of the machines, the quality of the plastic mouldings and an easy to use machines control is the focus. To ensure a constant plastics part quality the set process parameters of the injection moulding machines are kept constant by appropriate closed loop control strategies today. Assuming a constant quality of the processed plastic raw material, this strategy is effective. If it comes to a qualitative variation in the processed plastics, which often leads to a change in viscosity of the plastics melt, keeping processing parameters constant will not lead to a constant quality of the moulded parts. The deviations in the plastics viscosity have such a great influence on the moulding process that the relevant process parameters have to be adjusted manually in many cases. Often the stroke of the reciprocating screw system has to be adapted to reach a constant filling volume of the cavity and therefore avoid burr formation or short shots. In this paper an approach for adaptive process control is introduced. This control loop is able to correct the set points of specific machines parameters online within the production cycle and therefore is able to avoid changes in the produced parts quality.
|
2 |
Technologie výroby plastového tělesa clony / Production technology of plastic body apertureDluhoš, Jan January 2013 (has links)
This thesis deals with the production of a plastic body of the aperture by the method of injection moulding. The work includes a design of the injection mould for the given component. First, an appropriate material for the moulded piece was chosen and then the necessary calculations for the injection mould were made. A quadruplex injection mould with a heated inlet nozzle and pullout cores was designed based on these calculations. Modular components were chosen when designing the injection mould. The next part of the thesis contains the selection of the injection moulding machine for the given mould. The conclusion contains a technical-economical evaluation including the cost estimating for the injection mould and cost estimating for one moulded piece.
|
3 |
Návrh technologie výroby tělesa světlometu motocyklu / Design of manufacturing technology for motorcycle headlamp bodyNosek, Jan January 2010 (has links)
The thesis is a proposal technology of the main body of motorcycle polymer material from Bayer's APEC - high temperature polycarbonate 1703. Literary study summarizes findings from a thermoplastic injection molding technology and the possibilities of structural design of injection molds, plastic plating technology from a focus on the most important technology in the field of lighting technology vehicles. Given the anticipated production run of 50 thousand. pieces are assessed a total of 2 variants of the molding parts. The practical part was modeled and specified product designed mold. Construction was done by using SolidWorks 2007 software and normalities FCPK Bytów and HASCO. For the selected option is implemented technological calculations. For the proposed technology was chosen Allrounder injection molding machine 570 A the manufacturer Arburg designed and suitable technological process of production.
|
4 |
Adaptive process control for stabilizing the production process in injection moulding machinesSchiffers, Reinhard, Holzinger, Georg P., Huster, Gernot January 2016 (has links)
Plastic injection moulding machines are a positive example of the possibilities in terms of performance and energy efficiency of modern hydraulic drives technology. In addition to the performance and energy efficiency of the machines, the quality of the plastic mouldings and an easy to use machines control is the focus. To ensure a constant plastics part quality the set process parameters of the injection moulding machines are kept constant by appropriate closed loop control strategies today. Assuming a constant quality of the processed plastic raw material, this strategy is effective. If it comes to a qualitative variation in the processed plastics, which often leads to a change in viscosity of the plastics melt, keeping processing parameters constant will not lead to a constant quality of the moulded parts. The deviations in the plastics viscosity have such a great influence on the moulding process that the relevant process parameters have to be adjusted manually in many cases. Often the stroke of the reciprocating screw system has to be adapted to reach a constant filling volume of the cavity and therefore avoid burr formation or short shots. In this paper an approach for adaptive process control is introduced. This control loop is able to correct the set points of specific machines parameters online within the production cycle and therefore is able to avoid changes in the produced parts quality.
|
Page generated in 0.1346 seconds