Spelling suggestions: "subject:"polarizer"" "subject:"polarized""
1 |
Aspects of tapered optical fibre polarizersLefrançois, Marcel January 1987 (has links)
This thesis proves that it is possible in principle to make in line optical fibre polarizers from tapered optical fibres surrounded by a quartz cladding. The theory of light propagation and polarization in fibres was reviewed as background information and several fabrication processes were evaluated and tried experimentally. The best results are obtained by heating a quartz tube in an oxy-propane flame, so that it collapses onto the fibre. Unfortunately, due to residues remaining between fibre and quartz tube, and due to large differences in melting points the results are quite irreproducible, and routine fabrication of polarizers with predictable properties is not yet feasible by the methods described in this thesis. / Science, Faculty of / Physics and Astronomy, Department of / Graduate
|
2 |
Lifetime testing of wire-grid polarizers with selected over-coatings /Malone, Steven J., January 2007 (has links) (PDF)
Thesis (M.S.)--Brigham Young University. Dept. of Technology, 2007. / Includes bibliographical references (p. 75-77).
|
3 |
Methods for creating a multi-axis polarizer for visible light attenuation by linear translationDonatelli, Peter L. January 1900 (has links)
Thesis (M.S.)--West Virginia University, 2005. / Title from document title page. Document formatted into pages; contains vii, 53 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 52-53).
|
4 |
Increasing optical disc data density by using nano-scale metallic wire polarisers : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Engineering in Electrical and Computer Engineering at the University of Canterbury, Christchurch, New Zealand /Chin, Allan Tzu-Kang. January 1900 (has links)
Thesis (M.E.)--University of Canterbury, 2006. / Typescript (photocopy). "30th January 2006." Includes bibliographical references (p. 127-130). Also available via the World Wide Web.
|
5 |
Development of a Novel Wideband Horn Antenna Polarizer and Fully Polarimetric Radar Cross Section Measurement Reference TargetKuloglu, Mustafa 17 July 2012 (has links)
No description available.
|
6 |
An Analysis of W-fibers and W-type Fiber PolarizersPaye, Corey 04 June 2001 (has links)
Optical fibers provide the means for transmitting large amounts of data from one place to another and are used in high precision sensors. It is important to have a good understanding of the fundamental properties of these devices to continue to improve their applications.
A specially type of optical fiber known as a W-fiber has some desirable properties and unique characteristics not found in matched-cladding fibers. A properly designed W- fiber supports a fundamental mode with a finite cutoff wavelength. At discrete wavelengths longer than cutoff, the fundamental mode experiences large amounts of loss. The mechanism for loss can be described in terms of interaction between the fiber's supermodes and the lossy interface at the fiber's surface. Experiments and computer simulations support this model of W-fibers.
The property of a finite cutoff wavelength can be used to develop various fiber devices. Under consideration here is the fiber polarizer. The fiber polarizer produces an output that is linearly polarized along one of the fiber's principal axes. Some of the polarizer properties can be understood from the study of W-fibers. / Master of Science
|
7 |
A Study on the Competition Strategies of Taiwan's Polarizer EnterprisesTsai, Chi-hsun 12 August 2006 (has links)
Polarizers are key components of TFT-LCD panels. Because their production demands high technical know-how and the supply of their raw materials was under the control of Japanese companies, these companies used to have few competitors and enjoyed good profits. Recently, however, panels have been mass-produced. Since their investments that often amount to hundreds of billions of NT dollars, panel producers have undertaken vertical integration in order to reduce costs for production. In order also to avoid being limited by the shortage of TAC¡Xan important component of polarizers-- panel producers have been reaching into the polarizer industry one after another. It takes a relatively long time to be able to control the quality of polarizers and to produce a large amount of them. At the present time, the leading companies are Nitto Denko and Suwitomo in Japan, and Optimax in Taiwan. Though the new comers to the polarizer industry so far pose no big threat to these well-established companies, their joining in means a warring age has set in for the polarizer industry. And this study of mine tries to analyze what cutting edge Taiwan¡¦s polarize companies have over their competitors.
To understand how cluster influences investments in and development of TFT-LCD industry, I study this industry in Taiwan. I use the Five ¡VForce Model and the Diamond Model proposed by Michael E. Porter to analyze the data. And then I study six polarizer companies in Taiwan, analyzing their developments and the turning points of their strategies. I hope I can make some contributions to the TFT-LCD industry in Taiwan.
In my research, I find that this industry has become an oligopoly. The important factors that determine a company¡¦s competitiveness are its R&D abilities, manufacturing technology, and policies in forming strategic alliances. I also find that local Taiwanese companies do not have an advantage over those leading Japanese companies in either their R&D abilities or their access to raw materials. Their hopes of survival lie in the differentiation of their products and in forming good strategic alliances with their clients.
The purposes of this thesis are four: (1) analyzing the polarizer industry in Taiwan and their competitiveness, (2) studying the key factors of their success or failure, (3) understanding why their CEOs decide to enter this industry, and (4) getting to know why they decide to leave this industry by being merged. My study has successfully fulfilled these purposes and in it are also several suggestions for the reference of those CEOs who are planning to enter this industry.
|
8 |
Anisotropic Ray TraceLam, Wai Sze Tiffany January 2015 (has links)
Optical components made of anisotropic materials, such as crystal polarizers and crystal waveplates, are widely used in many complex optical system, such as display systems, microlithography, biomedical imaging and many other optical systems, and induce more complex aberrations than optical components made of isotropic materials. The goal of this dissertation is to accurately simulate the performance of optical systems with anisotropic materials using polarization ray trace. This work extends the polarization ray tracing calculus to incorporate ray tracing through anisotropic materials, including uniaxial, biaxial and optically active materials. The 3D polarization ray tracing calculus is an invaluable tool for analyzing polarization properties of an optical system. The 3×3 polarization ray tracing P matrix developed for anisotropic ray trace assists tracking the 3D polarization transformations along a ray path with series of surfaces in an optical system. To better represent the anisotropic light-matter interactions, the definition of the P matrix is generalized to incorporate not only the polarization change at a refraction/reflection interface, but also the induced optical phase accumulation as light propagates through the anisotropic medium. This enables realistic modeling of crystalline polarization elements, such as crystal waveplates and crystal polarizers. The wavefront and polarization aberrations of these anisotropic components are more complex than those of isotropic optical components and can be evaluated from the resultant P matrix for each eigen-wavefront as well as for the overall image. One incident ray refracting or reflecting into an anisotropic medium produces two eigenpolarizations or eigenmodes propagating in different directions. The associated ray parameters of these modes necessary for the anisotropic ray trace are described in Chapter 2. The algorithms to calculate the P matrix from these ray parameters are described in Chapter 3 for anisotropic ray tracing. This P matrix has the following characteristics: (1) Multiple P matrices are calculated to describe the polarization of the multiple eigenmodes at an anisotropic intercept. (2) Each P matrix maps the orthogonal incident basis vectors (Ê_m, Ê_n, Ŝ) before the optical interface into three orthogonal exiting vectors (a_m Ê'_m, a_n Ê'_n, Ŝ') after the interface, where a_m and a_n are the complex amplitude coefficients induced at the intercept. The ray tracing algorithms described in this dissertation handle three types of uncoated anisotropic interfaces isotropic/anisotropic, anisotropic/isotropic and anisotropic/anisotropic interfaces. (3) The cumulative P matrix associated with multiple surface interactions is calculated by multiplying individual P matrices in the order along the ray path. Many optical components utilize anisotropic materials to induce desired retardance. This important mechanism is modeled as the optical phase associated with propagation. (4) The optical path length OPL of an eigenpolarization along an anisotropic ray path is incorporated into the calculation of each P matrix. Chapter 4 presents the data reduction of the P matrix of a crystal waveplate. The diattenuation is embedded in the singular values of P. The retardance is divided into two parts: (A) The physical retardance induced by OPLs and surface interactions, and (B) the geometrical transformation induced by geometry of a ray path, which is calculated by the geometrical transform Q matrix. The Q matrix of an anisotropic intercept is derived from the generalization of s- and p-bases at the anisotropic intercept; the p basis is not confined to the plane of incidence due to the anisotropic refraction or reflection. Chapter 5 shows how the multiple P matrices associated with the eigenmodes resulting from propagation through multiple anisotropic surfaces can be combined into one P matrix when the multiple modes interfere in their overlapping regions. The resultant P matrix contains diattenuation induced at each surface interaction as well as the retardance due to ray propagation and total internal reflections. The polarization aberrations of crystal waveplates and crystal polarizers are studied in Chapter 6 and Chapter 7. A wavefront simulated by a grid of rays is traced through the anisotropic system and the resultant grid of rays is analyzed. The analysis is complicated by the ray doubling effects and the partially overlapping eigen-wavefronts propagating in various directions. The wavefront and polarization aberrations of each eigenmode can be evaluated from the electric field distributions. The overall polarization at the plane of interest or the image quality at the image plane are affected by each of these eigen-wavefronts. Isotropic materials become anisotropic due to stress, strain, or applied electric or magnetic fields. In Chapter 8, the P matrix for anisotropic materials is extended to ray tracing in stress birefringent materials which are treated as spatially varying anisotropic materials. Such simulations can predict the spatial retardance variation throughout the stressed optical component and its effects on the point spread function and modulation transfer function for different incident polarizations. The anisotropic extension of the P matrix also applies to other anisotropic optical components, such as anisotropic diffractive optical elements and anisotropic thin films. It systematically keeps track of polarization transformation in 3D global Cartesian coordinates of a ray propagating through series of anisotropic and isotropic optical components with arbitrary orientations. The polarization ray tracing calculus with this generalized P matrix provides a powerful tool for optical ray trace and allows comprehensive analysis of complex optical system.
|
9 |
Ανάλυση της ανάκλασης του φωτός σε ανεξάρτητες συνιστώσεςΚλαουδάτου, Αθηνά 18 June 2009 (has links)
Η παρούσα διπλωματική εργασία ασχολείται με τη χρήση πολωτικών φίλτρων στη φωτογραφία. Συγκεκριμένα, ερευνήσαμε το αν μπορούν να χρησιμοποιηθούν τα πολωτικά φίλτρα σε συστήματα αναγνώρισης αντικειμένων και το ποια είδη φίλτρων μπορούν να χρησιμοποιηθούν. Για το σκοπό αυτό, δημιουργήθηκε μία βάση δεδομένων με φωτογραφίες που βγάλαμε σε εξωτερικό χώρο του Πανεπιστημίου Πατρών, με τη βοήθεια διαφόρων ειδών πολωτικών φίλτρων. Η εργασία βασίστηκε κατά ένα μεγάλο μέρος σε άρθρα και πληροφορίες που συλλέξαμε από το διαδίκτυο. Τα αποτελέσματα ήταν αρκετά ικανοποιητικά και καταλήξαμε στο συμπέρασμα ότι, τόσο τα γραμμικά όσο και τα κυκλικά πολωτικά φίλτρα, μπορούν να χρησιμοποιηθούν στην αναγνώριση υλικών ή αντικειμένων που φωτίζονται επαρκώς. / This project refers to the use of polarizing filters in photography. In particular, we researched if polarizers can be utilized in object identification systems and which kind of polarizers would be appropriate. For this purpose, we created a data base of photographs which were taken at an outdoor place of the University of Patras, using various kinds and orientations of polarizers. The project was based, mainly, on articles and information we found on the internet. The results were quite satisfying and we concluded that both linear and circular polarizers can be utilized in object identification under enough illumination.
|
10 |
Dielectric-based Components and Methods for Terahertz SensingColleoni, Margherita Patrizia Maria 02 September 2020 (has links)
[ES] En el presente trabajo, se investigan algunos aspectos de la interacción de los materiales dieléctricos con ondas de THz. La banda de THz, que incluye las frecuencias de 100 GHz a 30 THz, ha despertado un gran interés sobre todo por su baja energía y su buena capacidad de penetración en materiales de uso diario como tejidos y plásticos. Las características peculiares de estas ondas permiten su aplicación en diversos campos tecnológicos, especialmente como herramientas científicas y para la inspección de control de calidad. Para avanzar en la aplicación práctica de la radiación THz, la presente tesis doctoral investigó varios caminos. En primer lugar, se trataron métodos alternativos de bajo coste para la fabricación de componentes pasivos de THz, centrándose en los polarizadores. El interés en el control de la polarización nace de la demanda de un mayor control sobre las características físicas de los haces de THz. Asimismo, se han investigado los polarizadores wire grid flexible basados en el efecto de absorción dicroica. Se han fabricado polarizadores con grafito y GaIn24,5 depositados en materiales ordinarios utilizados como sustratos (papel y polímeros como PVA y PVC). Mediante la colaboración con el grupo de investigación chino dirigido por el profesor Liu de la Universidad de Tsinghua, se investigaron procesos de fabricación alternativos. Todos los componentes se simularon mediante un simulador comercial basado en la técnica de integrales finitas FIT (CST Microwave Studio). En segundo lugar, se investigó el potencial de la técnica de fixed delay para la detección rápida de elementos homogéneos y transparentes con posible aplicación en la inspección de calidad industrial. En este esquema, la variación de corriente del haz de THz en un punto específico está relacionada con la variación de sus parámetros ópticos, por lo que se demostró la capacidad de detectar defectos, así como de estimar sus volúmenes bajo ciertas condiciones. Por último, un enfoque diferente para el beam profile basado en un slit dieléctrico fue evaluada como alternativa a los métodos convencionales utilizados en la región de THz y la óptica. Todas las mediciones, tanto la espectroscopia como el control de la polarización, se hicieron por medio de un sistema basado en fibra TDS-THz, con antenas fotoconductoras (PCA), tanto para la generación como para la detección de THz. / [EN] In the present work, some aspects of the role of dielectric materials when interacting with THz waves were investigated. The THz bandgap, which covers the frequencies from 100 GHz to 30 THz, has aroused great interest mainly due to its low energy and its good penetration capacity in some materials of daily use such as fabrics and plastics. The peculiar features of terahertz waves enable their application in various technological fields, especially as scientific tools and for quality control inspection. To advance in the practical application of THz radiation, the present doctoral thesis researched several paths. Firstly, alternative low-cost methods for manufacturing THz passive components, in particular, THz polarizers was treated. The interest in polarization control is derived from the demand for greater control over the physical characteristics of THz beams. Flexible wire grid polarizers based on the dichroic absorption effect have been investigated. The polarizers have been manufactured using graphite and GaIn24.5 deployed on ordinary materials used as substrates (paper and polymers such as PVA and PVC). Through a collaboration undertaken with the Chinese research group led by Professor Liu at Tsinghua University, alternative manufacturing processes were researched. All components were simulated through a commercial simulator based on the FIT finite integrals technique (CST Microwave Studio). Secondly, the potential of the fixed delay technique was investigated for rapid sensing of homogeneous and transparent items with possible application to industrial quality inspection. In this scheme, the current variation of the THz beam at a specific point is related to the variation of its optical parameters, thus it was demonstrated the ability of the method in detecting voids as well as in roughly estimating their volumes under certain conditions. Finally, a different approach for beam profiling based on a dielectric slit aperture was evaluated, as an alternative to the conventional methods used in the THz region and optics All measurements, both spectroscopy and polarization control, were made by means of a TDS-THz fibre-based system, with photoconductive antennas (PCA), both for the generation and detection of THz. / [CA] En el present treball, s'investiguen alguns aspectes del paper dels materials dielèctrics quan interactuen amb ones de THz. El bandgap de THz, que cobreix les freqüències de 100 GHz a 30 THz, ha despertat un gran interés principalment a causa de la seua baixa energia i la seua bona capacitat de penetració en alguns materials d'ús diari com els teixits i els plàstics. Les característiques peculiars de les ones de terahertz permeten la seua aplicació en diversos camps tecnològics, especialment com a eines científiques i per a la inspecció de control de qualitat. Per a avançar en l'aplicació pràctica de la radiació THz, la present tesi doctoral investiga diversos camins. En primer lloc, es s'han tractat mètodes alternatius de baix cost per a la fabricació de components passius de THz, centrant-se principalment en polaritzadors de THz. L'interés en el control de la polarització es deriva de la demanda d'un major control sobre les característiques físiques dels feixos de THz. Així mateix, s'han investigat els polaritzadors amb reixes de filferro flexible basats en l'efecte d'absorció dicroica. Els polaritzadors s'han fabricat utilitzant grafit i GaIn24,5 desplegats en materials ordinaris utilitzats com a substrats (paper i polímers com el PVA i el PVC). Mitjançant una col·laboració empresa amb el grup d'investigació xinés dirigit pel professor Liu de la Universitat de Tsinghua, es van investigar processos de fabricació alternatius. Tots els components es van simular mitjançant un simulador comercial basat en la tècnica d'integrals finites FIT (CST Microwave Studio). En segon lloc, s'ha investigat el potencial de la tècnica de retard fix per a la detecció ràpida d'elements homogenis i transparents amb possible aplicació a la inspecció de qualitat industrial. En aquest esquema, la variació actual del feix de THz en un punt específic està relacionada amb la variació dels seus paràmetres òptics, per la qual cosa es va demostrar la capacitat del mètode per a detectar els buits així com en l'estimació aproximada dels seus volums sota certes condicions. Finalment, un enfocament diferent per al perfil de feix basat en una obertura d'escletxa dielèctrica ha sigut avaluada, com a alternativa als mètodes convencionals utilitzats a la regió de THz i l'òptica.Tots els mesuraments, tant l'espectroscòpia com el control de la polarització, es van fer per mitjà d'un sistema basat en fibra TDS-THz, amb antenes fotoconductores (PCA), tant per a la generació com per a la detecció de THz. / Colleoni, MPM. (2020). Dielectric-based Components and Methods for Terahertz Sensing [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/149569 / TESIS
|
Page generated in 0.0732 seconds