Seed addition experiment was conducted on the moisture gradient with aim to demonstrate that many species not accounted by current measures of species pools in a site should be included because they are in fact able to establish successfully if biotic filter is removed. Transplant experiment was established to compare the sensitivity of seedling recruitment and survival of transplants in the field. Recruitment of seedlings in field was observed and compared with germination of seeds under different chilling treatments in laboratory.

This thesis aims to provide an overview of possibilities of using low-potential waste heat produced at the CEZ Temelin Nuclear Power Plant. It also shows current technological possibilities of using low-potential heat sources in the primary form or as a waste by-product in leisure time aquapark, eventually the waste heat used as a source of central heat system supply victim village.

The goal of this work was to evaluate of water quality in natural swimming pools in Borovany and Sezimovo Ústí, to compare the differences in the results of water analyses in proper swimming water body and regenerative part, as well as to compare of both these localities. Most of results were gathered during 2016 in Borovany and during 2017 in Sezimovo Usti. Transparency, color of water, temperature, conductivity, concentration of dissolved O2, concentrations of NH4-N, NO2-N, NO3-N, TN, PO4-P, TP, Cl, turbidity, fluorescence, chlorophyll concentration, alkalinity, zooplankton and phytoplankton composition and bacterial contamination were monitored. The results confirmed the possibility to achieve the good water quality even though the problem with phosphorus removing remains. The comparison of both site showed more efficient functioning of regenerative zone in Borovany natural swimming pool.

Made available in DSpace on 2016-06-02T19:29:55Z (GMT). No. of bitstreams: 1 5071.pdf: 6530153 bytes, checksum: 71875d271723b1b5d923027f92ee8038 (MD5) Previous issue date: 2013-03-21 / Identifying the relative importance of deterministic and stochastic factors to the assembly of local communities has been tagged as one of the fundamental questions ecologists need to answer. Niche-based theories predict that the subset of species from the regional pool that occur in a local community presents a trait distribution that has been shaped by biotic and abiotic factors. The neutral theory, on the other hand, predicts that the species that compose the regional pool are functionally equivalent. Local communities formed from stochastic processes would, thus, present abundances not significantly different from those in the species pool. We collected traits on all woody individuals in 100 25m2 quadrats to test if we could predict local abundances using a pool of species and traits. We combined plots into large scale, intermediate scale, and fine scale samples. We used random sampling, spatial distance, soil characteristics, and fire to assemble species in different scales and environmental gradients. In the Brazilian cerrado, fire and nutrient-poor soils are likely promoters of habitat filtering. To test if traits improved the predictions generated by the information present in the pool, we used maximum entropy models coupled with permutation tests. We could accurately predict local abundances of the 73 species in the pool. Dispersal limitation was the main factor assembling communities at all the scales we studied, but the effects of stochasticity became more important as the scale became local. Traits explained little of the uncertainty present in local abundances, but coupled with pool frequencies they yielded large coefficients of determination. / Entender como a biodiversidade e o funcionamento dos ecosistemas vão responder às mudanças nas condições ambientais é essencial para a manutenção das interações que influenciam as propriedades dos ecossistemas. Os sistemas ecológicos respondem à mudanças nas condições ambientais não apenas por meio da interação direta com essas condições, mas também de maneira indireta, via organismos. No primeiro capítulo, descrevemos o uso de variáveis latentes e modelos de equações estruturais em ecologia. No segundo capítulo, nós investigamos como variações em características ambientais resultam em variações na diversidade funcional e funcionamento de uma comunidade de arbustos e árvores de cerrado no Parque Nacional das Emas (GO). Nós usamos modelagem de equações estruturais para quantificar os efeitos da fertilidade do solo, alumínio, disponibilidade de água e diversidade funcional na decomposição de serapilheira. Nós encontramos efeitos diretos entre nutrientes do solo, disponibilidade de água e alumínio na diversidade funcional e funcionamento da comunidade. O fogo não teve um efeito direto, mas sim caminhos indiretos pelos quais o fogo influencia a diversidade funcional e o funcionamento. No terceiro capítulo, nós procuramos identificar a importância de processos determinísticos e estocásticos na composicão da comunidade vegetal do cerrado em Emas. Nós testamos, por meio de modelos de máxima entropia e testes de permutação, se os traços das espécies adicionariam informação relevante para a previsão das abundâncias além da informação já presente no repositório de espécies. Nossos modelos tiveram alto poder de previsão para as 73 espécies do repositório. Limitação de dispersão foi o principal processor compondo as comunidades. Processos estocásticos também tiveram grande importância, principalmente na escala local. Sem a informação prévia sobre as frequências das espécies, modelos com os traços tiveram pouco poder de explicação. Entretanto, ao combinarmos traços e frequências no repositório, nossos modelos resultaram em altos coeficientes de determinação. No último capítulo, nós mostramos como fogo e fertilidade do solo influenciam diferentes grupos de traços e como esses traços influenciam na composição e densidade das comunidades. Cerrados; Comunidades vegetais; Funcionamento de comunidades; Modelos de equações estruturais

Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2014-11-10T11:30:02Z No. of bitstreams: 0 / Made available in DSpace on 2014-11-10T11:30:02Z (GMT). No. of bitstreams: 0 / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

``Water-related injuries{\crqq} are the second most frequent cause of death of children in the Czech Republic. My thesis addresses the issue of safety in facilities designed for aquatic leisure activities. Within the scope of the qualitative research with the aim to analyze technical standards, to ascertain their observance and afterwards to analyze the injury risks I used the data collection technique consisting in secondary data analysis, observation in combination with photographic documentation and semi-standardized interviews. For the research I selected a swimming pool in České Budějovice and Aquaviva Wellness Centre in Aurora Třeboň spa. The reason for this selection was creation of a pilot study monitoring safety in these facilities in South Bohemia. The Czech Republic has technical standards in place that are applied to minimize the risk of injury to the largest possible extent in facilities like that. They determine the procedures that have to be observed during construction and subsequent operation of facilities designed for aquatic leisure activities. The provisions defined by the standards are observed in both facilities but in their substance they are so generalized that it is only at the operators{\crq} discretion to what extent the safety is to be secured by them. They should be more specified and applied concretely to individual units of the equipment in order to create a safe environment. As far as risk places in the facilities are concerned, it may be stated that, regardless of compliance with the requirements defined by the standard, there is a large number of risks related in particular with slippery surfaces. Within the scope of the safety evaluation, it is also necessary to take account of hazardous behaviour of users of the chutes. The results of the research indicate that in Aquaviva Wellness Centre in Třeboň safety is secured and complies with the requirements of technical standards and the prevention requirements; the swimming pool in České Budějovice shows more serious defects {--} the standards are complied with but the surfaces are not covered with materials that would secure safety. On the basis of my research and other technical studies that confirmed seriousness of water-related injuries it is obvious that the issue of injuries in this field will require modification of safety measures and more precise specification of standards and thus elements such as materials of surfaces that would secure the required safety.

Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2014-11-10T11:30:02Z No. of bitstreams: 0 / Made available in DSpace on 2014-11-10T11:30:02Z (GMT). No. of bitstreams: 0 / O Instituto de Pesquisas Energéticas e Nucleares IPEN-CNEN/SP produz rotineiramente o combustível nuclear necessário para a operação de seu reator de pesquisas IEA-R1. Esse combustível é formado por placas combustíveis contendo núcleos de dispersões U3Si2-Al, obtidas por laminação. As placas combustíveis sofrem um tratamento químico para limpeza de sua superfície, com o objetivo de garantir a remoção de qualquer impureza presente em suas superfícies, incluindo resíduos de urânio. Nos últimos 10 anos foram constatados de forma esporádica aumentos significativos na atividade radioativa da água da piscina do reator IEA-R1. O aumento da atividade no ambiente do reator foi relacionado à entrada na piscina de elementos combustíveis recém-fabricados, entrando em operação. Apesar do processo de tratamento superficial atual estar perfeitamente estável e reprodutível, uma possível causa para o aumento da atividade da água da piscina do reator IEA-R1 é a presença de contaminação residual de urânio na superfície não retirada pelo tratamento químico superficial. Durante anos, esse problema não foi observado devido à baixa potência de operação do reator, no nível de 2 MW. Contudo, com o aumento da potência, acima de 3,5 MW, esse problema começou a ser observado. Esse trabalho verifica a hipótese da contaminação residual de urânio na superfície das placas combustíveis de forma estatística e caracteriza a adequação do processo de tratamento superficial de placas combustíveis. Utilizou-se uma metodologia estatística de avaliação do processo em três níveis: produção presente, contaminação intencional, produção histórica. A contagem de emissões alfa por contador de NaI permitiu a quantificação de urânio residual. Como resultado global, verificou-se que pode ocorrer contaminação abaixo de 1 g de 235U por elemento combustível. Essa contaminação não é significante para causar eventuais acidentes de aumento de atividade no reator IEA-R1. Provou-se no presente trabalho que a metodologia de contagens de emissões alfa é segura, precisa e rápida para se analisarem contaminações superficiais de urânio nas placas combustíveis. / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Interest in the use of heat pipe technology for heat recovery and energy saving in a vast range of engineering applications has been on the rise in recent years. Heat pipes are playing a more important role in many industrial applications, especially in increasing energy savings in commercial applications and improving the thermal performance of heat exchangers. Computational techniques play an important role in solving complex flow problems for a large number of engineering applications due to their universality, flexibility, accuracy and efficiency. However, up to now, computational studies on heat pipes are still at an early stage due to the complexity of multiphase flow characteristics and heat and mass transfer phase changes. Therefore, the main objective of this study is to develop a CFD modelling that includes the complex physical phenomena of both the heat transfer processes of evaporation and condensation and the mass transfer process of phase change during the pool boiling and film condensation. In this thesis, two novel numerical models were developed in ANSYS FLUENT. In the first, a two-dimensional CFD model was developed to visualise the two-phase flow and the evaporation, condensation and heat transfer phenomena during the operation of a wickless heat pipe, that otherwise could not be visualised by empirical or experimental work. An in-house code was developed using user-defined functions (UDFs) to enhance the ability of FLUENT to simulate the phase change occurring inside the heat pipe. Three different fluids, water, R134a and R404a, were selected as the working fluids of the investigated wickless heat pipe. The cooling system of the condenser section was simulated separately as a three-dimensional CFD model of a parallel-flow double pipe heat exchanger to model the heat transfer across the condenser section's heat exchanger and predict the heat transfer coefficients. The overall effective thermal resistance along with the temperature profile along the wickless heat pipe have been investigated. An experimental apparatus was built to carry out a thermal performance investigation on a typical wickless heat pipe for the purpose of validating the CFD simulation. A theoretical model based on empirical correlations was developed to predict the heat transfer thermal resistances in the evaporator and the condenser section. The second model was developed to combine the two-dimensional CFD simulation of the wickless heat pipe and the three-dimensional CFD simulation of the condenser section's heat exchanger to simulate the two-phase flow phenomena of boiling and condensation and the cooling system of the condenser section through a comprehensive three-dimensional CFD model of a wickless heat pipe. Two fluids, water and R134a, were selected as the working fluids of the investigated wickless heat pipe. This model was validated using a transparent glass wickless heat pipe to visualise the phenomena of pool boiling and comparing the results with the three-dimensional CFD flow visualisation. This study demonstrated that the proposed CFD models of a wickless heat pipe can successfully reproduce the complex physical phenomena of both the heat transfer process of evaporation and condensation and the mass transfer process of phase change during the pool boiling that takes place in the evaporator section and the filmwise condensation that takes place in the condenser section. The CFD simulation was successful in modelling and visualising the multiphase flow characteristics for water, R134a and R404a, emphasising the difference in pool boiling behaviour between these working fluids. The CFD simulation results were compared with experimental measurements, with good agreement obtained between predicted temperature profiles and experimental temperature data.

The rapid development of wind energy in Sweden created a volatile environment for the electricity market. Variance in the daily prices and the reductions of the average prices over the years due to the merit order effect of intermittent wind energy resulted in increased unpredictability in financial returns, which led to many wind projects being cancelled. In this thesis, in order to shed more light on the impact of wind energy development on spot prices, an artificial neural network (ANN) electricity price forecasting model is designed in order to predict Sweden’s four electricity regions Nord Pool Elspot day-ahead electricity spot market prices. The model's final result displayed a mean absolute error of 3.3398 €/MWh. In order for the model to be able to generalize better, a ridge regression regularizer is added to the ANN. Alternative wind scenarios for Sweden are introduced and their spot prices are predicted by the ANN model. The results show that each 10% increase in wind energy production leads to a 0.9% spot price reduction in the Nord Pool Swedish energy market prices.

To mitigate microbial activity in swimming pools and to assure hygienic safety for bathers, pool systems have a re-circulating water system ensuring continuous water treatment and disinfection by chlorination. A major drawback associated with the use of chlorine as disinfectant is its potential to react with organic matter (OM) present in pool water to form potentially harmful disinfection by-products (DBP). In this thesis, the treatment performance of different combinations of conventional and novel treatment processes was compared using a pilot scale swimming pool model that was operated under reproducible and fully controlled conditions. The quality of the pool water was determined in means of volatile DBPs and the concentration and composition of dissolved organic carbon (DOC). Further, overall apparent reaction rates for the removal of monochloramine (MCA), a DBP found in pool water, in granular activated carbon (GAC) beds were determined using a fixed-bed reactor system operated under conditions typical for swimming pool water treatment. The reaction rates as well as the type of reaction products formed were correlated with physico-chemical properties of the tested GACs.