Global ETD Search

1	Needle Trap Device and Solid Phase Microextraction Combined with Portable GC-MS for On-Site Applications Warren, Jamie January 2011 (has links) Needle trap device (NTD) is a technique that is useful for a wide variety of applications involving the sample preparation of compounds with a wide range of chemico-physico properties, and varying volatilities. A newly designed NTD that improves the performance relative to previous NTD designs is simple to produce is developed. The NTD utilizes a side-hole needle with a modified tip to improve the sealing between the NTD and narrow neck liner of the GC injector, thereby increasing the desorption efficiency. The slurry packing method was applied, evaluated, and NTDs prepared by this method were compared to NTDs prepared using the vacuum aspiration method. NTD geometries including blunt tip with a side-hole needle, tapered tip with side-hole needle, dome tapered tip with side-hole, sliding tip with side-hole and blunt tip with no side-hole needle (expanded desorptive flow) were prepared and evaluated. Sampling performance and desorption efficiency were investigated using automated headspace extraction of benzene, toluene, ethylbenzene, p¬-xylene (BTEX), anthracene and pyrene. The tapered tip and sliding tip NTDs were found to have increased desorption efficiency. SPME and NTDs are valuable sample preparation tools for on-site analysis. Combining both extraction techniques allows for the differentiation of free and particle-bound compounds in a sample matrix. Portable GC/MS instrumentation can achieve fast separation, identification, and quantitation of samples prepared by the above techniques on-site without the need for transport to the laboratory. This minimizes the effects of volatiles lost and sample degradation during storage time. Here, SPME and tapered tip NTDs combined with portable GC/MS are used to investigate free and total emissions of BTEX and select PAHs from gasoline and diesel exhaust. Using the above optimized technologies, cigarette smoke in a smoking area where people were actively smoking and inside a smoker’s car were also investigated. Target contaminants were found in the investigated matrices at ng/mL levels. SPME needle trap device on-site portable GC/MS Chemistry
2	Needle Trap Device and Solid Phase Microextraction Combined with Portable GC-MS for On-Site Applications Warren, Jamie January 2011 (has links) Needle trap device (NTD) is a technique that is useful for a wide variety of applications involving the sample preparation of compounds with a wide range of chemico-physico properties, and varying volatilities. A newly designed NTD that improves the performance relative to previous NTD designs is simple to produce is developed. The NTD utilizes a side-hole needle with a modified tip to improve the sealing between the NTD and narrow neck liner of the GC injector, thereby increasing the desorption efficiency. The slurry packing method was applied, evaluated, and NTDs prepared by this method were compared to NTDs prepared using the vacuum aspiration method. NTD geometries including blunt tip with a side-hole needle, tapered tip with side-hole needle, dome tapered tip with side-hole, sliding tip with side-hole and blunt tip with no side-hole needle (expanded desorptive flow) were prepared and evaluated. Sampling performance and desorption efficiency were investigated using automated headspace extraction of benzene, toluene, ethylbenzene, p¬-xylene (BTEX), anthracene and pyrene. The tapered tip and sliding tip NTDs were found to have increased desorption efficiency. SPME and NTDs are valuable sample preparation tools for on-site analysis. Combining both extraction techniques allows for the differentiation of free and particle-bound compounds in a sample matrix. Portable GC/MS instrumentation can achieve fast separation, identification, and quantitation of samples prepared by the above techniques on-site without the need for transport to the laboratory. This minimizes the effects of volatiles lost and sample degradation during storage time. Here, SPME and tapered tip NTDs combined with portable GC/MS are used to investigate free and total emissions of BTEX and select PAHs from gasoline and diesel exhaust. Using the above optimized technologies, cigarette smoke in a smoking area where people were actively smoking and inside a smoker’s car were also investigated. Target contaminants were found in the investigated matrices at ng/mL levels. SPME needle trap device on-site portable GC/MS Chemistry
3	Gas Chromatography: Mass Spectrometry of Chemical Agents and Related Interferents Zhai, Lailiang 26 March 2006 (has links) (PDF) One of the main problems encountered in chemical analysis operations in the field is collecting sufficient sample from the source and transferring that sample to the measurement instrument for fast separation and identification. I have been involved in developing a field-portable gas chromatography-mass spectrometry (GC-MS) system with solid phase microextraction (SPME) sampling for point detection of chemical agents. The objective is to minimize the analysis time between sampling and detection of a potential chemical threat. SPME offers a convenient means for sampling gaseous and liquid samples, concentrating the analytes, and transferring the analytes to the injection port of a GC system for separation and identification. GC-MS has advantages of high efficiency, speed, and applicability for field analysis. Work was done to optimize the SPME fiber coating, capillary column dimensions, and GC operating conditions to provide complete analysis within 3 minutes. Since isothermal operation of the GC was a prior requirement, many components in the chromatograms were unresolved. Therefore, a peak de-convolution algorithm was applied to allow for identification and quantitation of poorly resolved and often completely obscured trace components. Details of the instrumentation and optimization of operating conditions are described in this thesis. gas chromatography-mass spectrometry solid phase microextraction chemical agents and related interferents field portable GC-MS fast GC Box-Behnken design Plankett-Burman design Biochemistry Chemistry
4	Design, Construction, and Characterization of a Mini-CO2/VOC Sensor and Gas Chromatograph for Field Research Basdeo, Rishi 01 January 2021 (has links) Volatile Organic Compounds (VOCs) are commonly used as indicators of an organism's health, among other factors. Traditionally, gas chromatographs (GC) are used to classify these but are prohibitively expensive and impractical for field use. This thesis outlines the motivations, design, construction, and characterization of a portable GC. This proof-of-concept uses off-the-shelf components to show that the production of a device is feasible. It was able to successfully generate carrier gas from the surrounding air via filtration by activated carbon fiber filters. It was also able to reliably produce distinguishable peaks for acetone and hexane at retention times that were reasonable for a prototype system. With some modifications, this system has the strong potential for long-term implementation in the field. Gas Chromatograph Portable VOC Volatile Organic Compound Volatile Organic Compounds VOCs Portable Gas Chromatograph GC Portable GC Micro GC VOC Sensor SGP30 VOC Detector Active Listener Active Listening Gas Chromatography Portable Gas Chromatography Field Research Field Instrumentation Portable Instrument Analytical Chemistry Instrumentation Field Sampling Low-Cost Instrument Open-Sourced Technology Sensor Analytical Chemistry Mechanical Engineering

1

Page generated in 0.048 seconds