Orientador: Jose Antenor Pomilio / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação / Made available in DSpace on 2018-08-09T17:49:15Z (GMT). No. of bitstreams: 1 Ferreira_AndreAugusto_D.pdf: 4648060 bytes, checksum: fec10ea5d77379b209259bd3174d9224 (MD5) Previous issue date: 2007 / Resumo: Este trabalho propõe uma estratégia de gestão de energia, para aplicações em veículos elétricos, baseado em um sistema supervisório nebuloso que combina três diferentes fontes de suprimento, em termos de densidade de energia e de densidade de potência, a saber: célula a combustível, bateria e supercapacitor. O sistema supervisório coordena o fluxo de potência entre os dispositivos de suprimento de energia e provê elevada qualidade de energia necessária para um bom desempenho do sistema de propulsão do veículo elétrico. A estratégia proposta de gestão de energia do conversor eletrônico com múltiplas entradas possibilita o controle individual da transferência de potência das fontes de suprimento, em suas melhores regiões da atuação. Um conveniente arranjo entre as fontes e alocação dos recursos disponíveis permite reduzir o dimensionamento da célula a combustível. Adicionalmente, a vida útil destas fontes e a imunidade do sistema de suprimento a variações bruscas de demanda de potência são melhoradas. Um protótipo de 3 kW é simulado e avaliado experimentalmente, incluindo um banco de baterias de chumbo-ácido e supercapacitor, para comprovar a eficácia da estratégia de controle proposta / Abstract: This work introduces an Energy Management strategy, for electrical vehicle applications, based on a fuzzy logic supervisory system that is able to combine three different power supply sources, i. e., fuel cell, battery and supercapacitor. The supervisory system coordinates the power flow between the power sources so that the system is able to provide high power quality, which is needed to achieve the desirable dynamic performance of the propulsion system. The proposed energy management strategy of a multiple input power electronic converter takes advantage of the individual characteristics of each power sou rce and makes than operate atthe best operation region. Through adequate power sources arrangements and use of the available resources, the fuel cell size is reduced. In addition, the power sources¿ life time and the system ride-through at sudden load disturbances are increased. Simulation and experimental results of a 3 kW prototype, with real supercapacitor and lead-acid batteries bank, prove that the fuzzy logic is a suitable energy management control strategy / Doutorado / Automação / Doutor em Engenharia Elétrica

The diploma thesis deals with dispersed generation (production). The small electric power sources are connected into distribution networks. Types and principles of the small electric power sources are studied. The legislation framework concerning renewable energy sources utilization is described. These power plants have impact into distribution networks and therefore techniques for the source connection to distribution network are included in the thesis. The impact of the specific small source of electricity must be studied.

This work is focused on the current issues, which are associated with the connection of fotovoltaic sources to the distribution grids. An example of these problems can be the connection of the bigger fotovoltaic power plant to the part of the grid with small short-circuit power. In consequence of this, it can happen that the quality parameters (voltage) of this grid are undesiderably influenced. Integral part of the connection procedure of the new sources to the grid is also a design and method of the power output, which is also part of this work.

The aim of this thesis is to describe the advantages of simultaneous utilization of photovoltaic and wind electricity in an autonomous system, supplying the household with electricity without connection to the electrical grid. The most used methods of connecting photovoltaic modules and wind generators to chemical batteries are discussed. Several maximum power point tracking methods and their properties are described. A block schematic diagram of an autonomous off-grid system utilizing chemical accumulators is proposed. The system also contains an inverter producing standard mains voltage 230 VAC to supply common household appliances. A Quasi-Square Wave converter topology was chosen for all three power converters. An experimental 180 W output power QSW converter with one controllable switch was designed, simulated with Pspice, manufactured and tested to verify the efficiency of the topology. Excellent agreement was found between predicted and measured efficiency at full output power. Efficiency for reliable operation varies between 89% and 92,2% at full power and depends mainly power inductor and MOSFET used. After successful evaluation of QSW topology, the power converters for the main system were designed. Because of higher power, the converters were designed as four-phase, whereas each phase contains two controllable switches to boost efficiency mainly in low-power area. The most critical and difficult part of the project was to design the mixed-signal control sections for the converters to ensure proper switching of two controllable MOSFETs in each phase. For user interactivity, main control board with graphic LC display, Ethernet module and SD memory card slot was also manufactured.

Le réchauffement climatique, la pollution de l'environnement et l'épuisement des énergies pétrolières ont attiré l'attention de l'humanité dans le monde entier. Les véhicules électriques hybrides à pile à combustible (FCHEV), utilisant l’hydrogène comme carburant et n’émettant aucune émission, sont considérés par les organismes publics et privés comme l’un des meilleurs moyens de résoudre ces problèmes. Cette thèse de doctorat considère un FCHEV avec trois sources d'énergie: pile à combustible, batterie et supercondensateur, ce qui complique l'élaboration d'une stratégie de gestion de l'énergie (EMS) pour répartir la puissance entre différentes sources d'alimentation. Parmi les méthodes de gestion de l'énergie de la littérature actuelle, la stratégie de minimisation de la consommation équivalente (ECMS) a été sélectionnée car elle permet une optimisation locale sans connaissance préalable des conditions de conduite et cela en donnant des résultats optimaux.En raison de la faible densité énergétique du supercondensateur, sa consommation équivalente d'hydrogène est négligée dans la plupart des références bibliographiques, ce qui va non seulement à l'encontre de l'objectif de minimiser la consommation totale d'hydrogène, mais accroît également la complexité du système EMS en raison du besoin d'un système EMS supplémentaire pour calculer la demande en puissance du supercondensateur. Ainsi, une stratégie ECMS à programmation quadratique séquentielle (SECMS) est proposée pour prendre en compte le coût énergétique des trois sources d’énergie dans la fonction objectif. Une stratégie de contrôle basée sur des règles (RBCS) et une stratégie hybride (HEOS) a été également conçues pour être comparée à SECMS. La dégradation des sources d'énergie représente un défi majeur pour la stabilité du système SECMS développé. Basé sur l'estimation en ligne de l'état de santé de la pile à combustible et de la batterie, le système ECMS adaptatif (AECMS) a été implémenté en ajustant le facteur équivalent et le taux de changement dynamique de la pile à combustible. Les résultats de la simulation montrent que l’AECMS peut assurer le maintien de la charge de la batterie et l’augmentation de la durabilité de la pile à combustible.Pour valider les algorithmes de gestion de l'énergie et les modèles numériques proposés, un banc d'essai expérimental a été construit autour de l'interface temps réel DSPACE. La comparaison des résultats de la simulation numérique et des résultats expérimentaux a montré que le système SECMS proposé fonctionne à un rendement maximal, que le supercondensateur fournit la puissance de pointe et que la batterie fonctionne comme un tampon d’énergie. Il a été prouvé que la négligence de la consommation d'hydrogène équivalente au supercondensateur dans l'ECMS conduit à un fonctionnement non optimal. Comparé à RBCS et HEOS, la SECMS a le moins d'hydrogène consommé et le courant de pile à combustible le plus stable. / Global warming, environment pollution and exhaustion of petroleum energies have risen their attention of the humanity over the world. Fuel cell hybrid electric vehicle (FCHEV) taking hydrogen as fuel and have zero emission, is thought by public and private organisms as one of the best ways to solve these problems. This PhD dissertation consider a FCHEV with three power sources: fuel cell, battery and supercapacitor, which increases the difficult to design an energy management strategy (EMS) to split the power between the different power sources.Among the EMS available in the current literature, the Equivalent consumption minimization strategy (ECMS) was selected because it allows a local optimization without rely on prior knowledge of driving condition while giving optimal results.Due to low energy density of supercapacitor, its equivalent hydrogen consumption is neglected in most bibliographic references, which not only counter to the aim of minimizing whole hydrogen consumption but also increase the complication of EMS due to the need of an additional EMS to calculate supercapacitor power demand. Thus, a sequential quadratic programming ECMS (SECMS) strategy is proposed to consider energy cost of all three power sources into the objective function. A rule based control strategy (RBCS) and hybrid strategy (HEOS) are also designed in order to to be compared with SECMS. Degradation of energy sources represents a major challenge for the stability of the developed SECMS system. So, based on online estimating state of heath of fuel cell and battery, an adaptive ECMS (AECMS) has been designed through adjusting the equivalent factor and dynamical change rate of fuel cell. The simulation results show that the AECMS can ensure the charge sustenance of battery and the increase of fuel cell durability.To validate the proposed energy management algorithms and the numerical models an exerimental test bench has been built around the real time interface DSPACE. The comparison of the simulation and experimental results showed that the proposed SECMS is operated at around maximum efficiency, supercapacitor supplies peak power, battery works as the energy buffer. It has been proved that the neglect of supercapacitor equivalent hydrogen consumption in ECMS leads to not optimal operation. Compared with RBCS and HEOS, SECMS has least hydrogen consumption and most stable fuel cell current.

Lithium-ion battery is attractive for various applications because of its high energy density. The performance of Li-ion battery is influenced by several properties of the electrode materials such as particle size, surface area, ionic and electronic conductivity, etc. Porosity is another important property of the electrode material, which influences the performance. Pores can allow the electrolyte to creep inside the particles and also facilitate volume expansion/contraction arising from intercalation/deintercalation of Li+ ions. Additionally, the rate capability and cycle-life can be enhanced. The following porous electrode materials are investigated. Poorly crystalline porous -MnO2 is synthesized by hydrothermal route from a neutral aqueous solution of KMnO4 at 180 oC and the reaction time of 24 h. On heating, there is a decrease in BET surface area and also a change in morphology from nanopetals to clusters of nanorods. As prepared MnO2 delivers a high discharge specific capacity of 275 mAh g-1 at a specific current of 40 mA g-1 (C/5 rate). Lithium rich manganese oxide (Li2MnO3) is prepared by reverse microemulsion method employing Pluronic acid (P123) as a soft template. It has a well crystalline structure with a broadly distributed mesoporosity but low surface area. However, the sample gains surface area with narrowly distributed mesoporosity and also electrochemical activity after treating in 4 M H2SO4. A discharge capacity of about 160 mAh g-1 is obtained at a discharge current of 30 mA g-1. When the acid-treated sample is heated at 300 °C, the resulting porous sample with a large surface area and dual porosity provides a discharge capacity of 240 mAh g-1 at a discharge current density of 30 mA g-1. Solid solutions of Li2MnO3 and LiMO2 (M=Mn, Ni, Co, Fe and their composites) are more attractive positive electrode materials because of its high capacity >200 mAh g-1.The solid solutions are prepared by microemulsion and polymer template route, which results in porous products. All the solid solution samples exhibit high discharge capacities with high rate capability. Porous flower-like α-Fe2O3 nanostructures is synthesized by ethylene glycol mediated iron alkoxide as an intermediate and heated at different temperatures from 300 to 700 oC. The α-Fe2O3 samples possess porosity with high surface area and deliver discharge capacity values of 1063, 1168, 1183, 1152 and 968 mAh g-1 at a specific current of 50 mA g-1 when prepared at 300, 400, 500, 600 and 700 oC, respectively. Partially exfoliated and reduced graphene oxide (PE-RGO) is prepared by thermal exfoliation of graphite oxide (GO) under normal air atmosphere at 200-500 oC. Discharge capacity values of 771, 832, 1074 and 823 mAh g -1 are obtained with current density of 30 mA g-1 at 1st cycle for PE-RGO samples prepared at 200, 300, 400 and 500 oC, respectively. The electrochemical performance improves on increasing of exfoliation temperature, which is attributed to an increase in surface area. The high rate capability is attributed to porous nature of the material. Results of these studies are presented and discussed in the thesis.