The Results of this thesis was the creation of two designed house variants with a module to all the apartments. In addition till the first module there are three other modules of apartments that can be put in the houses if it so needs. The house are volume prefabricated and are placed on site in a way that it create an enclosure of the area which faces against the nature and car parks also lies hidden behind these houses. For the actual structure, a cross beam was created to carry the floor above and it is support by all four walls. The structure between the first and the second floor has no "syll" but instead there are two differently alternative to linking the floors in order so that it will not move. The reason with this solution was that there will not be any subsidence when the forces from above are pressed down ward. The forces are instead directly down to the next timber frame system. This can happen when the real estate's owner might want to build more floors on the house than the present two floors house when there is no land to build and spaces are needed in the future.

<p>The Results of this thesis was the creation of two designed house variants with a module to</p><p>all the apartments. In addition till the first module there are three other modules of</p><p>apartments that can be put in the houses if it so needs. The house are volume prefabricated</p><p>and are placed on site in a way that it create an enclosure of the area which faces against the</p><p>nature and car parks also lies hidden behind these houses.</p><p>For the actual structure, a cross beam was created to carry the floor above and it is support</p><p>by all four walls. The structure between the first and the second floor has no "syll" but</p><p>instead there are two differently alternative to linking the floors in order so that it will not</p><p>move. The reason with this solution was that there will not be any subsidence when the</p><p>forces from above are pressed down ward. The forces are instead directly down to the next</p><p>timber frame system. This can happen when the real estate's owner might want to build</p><p>more floors on the house than the present two floors house when there is no land to build</p><p>and spaces are needed in the future.</p>

No description available.

Diploma thesis deals with revitalization issues of prefabricated house. The aim of the work evaluate the effectiveness of revitalization and presentation proposal of the best variant in terms of investment and energy savings. In the theoretical part is explained revitalization issues, problems of prefabricated houses, phase of the modernization and financing. Practical part is focused to specific revitalization of the prefabricated house, analysis of financial bids of banks and use of subsidies, analysis of energy audits. On the basis of the analysis is determined the optimal variant of the revitalization.

The main task of this thesis is to describe the development of residential properties in Žďár nad Sázavou. In the first part of the thesis describes the history of the location to the present. The second part is the development of construction is divided into several time periods, which describe in detail the development of the locality. Part of it is devoted to the historical city center. After describing the each time periods followed by a list of most residential properties. The work is accompanied by a map of the development of the urbanistic structure of town marked with residential buildings that are being solved. The last chapter is devoted to the future development of construction and overall assessment of the location.

The Master’s thesis deals with the energy savings of a prefabricated house. In the theoretical part, the issue of investment and risk management are first dealt with. Afterwards, the thesis deals with large panel construction in the Czech Republic, energy performance of buildings, heat losses, and especially methods for invesment appraisal. The main objective of the thesis is the economic analysis and the life-cycle analysis. The case study deals with the calculation of saving on heating the prefabricated house after its refurbishment and calculation of economic indicators.

The main task of this thesis is to describe the development of construction of residential real estates in Polička. It is about capturing a building development of residential real estates since the city's foundation to the present. The thesis describes the construction, large buildings and apartment complexes. It shows how the city was developed and how the city grew. The first part describes the history of the site to the present days. In the second part I describe several buildings and housing complexes characteristic for the city. I try to explain the development of construction in different periods by looking into these objects. At the last part I deal with the current land use plan and the possibilities of further construction. I mention maps of the area, historical and contemporary photographs of selected residential properties and important buildings in my thesis.

This thesis survey on juxtaposition choice waies evaluation for real property type residence and non-residential space in locality Lesná, where there are built - up type sectional construction namely more - housing type J. Are here used most common manners evaluation for these print real property. On top enclosed is several formulation of several estate agency (juxtaposition offers with demand) in given to locality. Further also design documentation housing periods in type panel building.