Growth anisotropy, in which cells grow predominantly in one direction, is common in plant cells, and an essential event for plant form and function. The direction and degree of growth anisotropy are governed by the mechanical properties of the primary cell wall. When aligned in a parallel manner, cellulose microfibrils accommodate great resistance in the direction of their alignment to expansion driven by isotropic turgor pressure. Using the Arabidopsis thaliana inflorescence stem as a model system, field emission scanning electron microscopy (FESEM) analysis demonstrated that the establishment of parallel arrangement of microfibrils is closely correlated with anisotropic cell expansion. In the novel anisotropy 1 (any1) mutant allele of the primary cellulose synthase CesA1, growth defects were correlated with random cellulose microfibril patterns in some inflorescence stem tissues. Microtubules have been considered to be the most likely candidates for controlling the orientation of cellulose microfibrils. Recent studies have indeed demonstrated a close association of the plasma membrane-localized cellulose-synthase-complexes (CSCs) that produce cellulose and cortical microtubules. Despite this close association, microtubule disruption did not cause cellulose microfibrils to lose parallel alignment in the radial and inner periclinal walls of cells in the inflorescence stem, suggesting that microtubules influence mechanical properties of cellulose microfibrils other than orientation. X-ray diffraction analysis demonstrated that cellulose crystallinity in wild-type plants declines at the growth-promoting temperature of 29°C, whereas crystallinity fails to adapt and remains high in mor1-1, the temperature-sensitive mutant whose microtubule arrays become disorganized at its restrictive temperature (29°C). This finding suggests that organized microtubules are involved in reducing cellulose crystallinity that normally accompanies increased cell expansion. Live-cell imaging of CSCs by tracking a yellow fluorescent protein (YFP)-tagged CesA6 subunit in hypocotyl cells demonstrated that dynamic and well-organized microtubules affect the velocity, the direction of movement, and the density of CSCs, suggesting that there is a close relationship between microtubules and CSCs. Together with the finding that microtubules also control the distribution of COBRA, a GPI-anchored wall protein that is essential for growth anisotropy, I discuss the variety of roles microtubules play in anisotropic growth.

Growth anisotropy, in which cells grow predominantly in one direction, is common in plant cells, and an essential event for plant form and function. The direction and degree of growth anisotropy are governed by the mechanical properties of the primary cell wall. When aligned in a parallel manner, cellulose microfibrils accommodate great resistance in the direction of their alignment to expansion driven by isotropic turgor pressure. Using the Arabidopsis thaliana inflorescence stem as a model system, field emission scanning electron microscopy (FESEM) analysis demonstrated that the establishment of parallel arrangement of microfibrils is closely correlated with anisotropic cell expansion. In the novel anisotropy 1 (any1) mutant allele of the primary cellulose synthase CesA1, growth defects were correlated with random cellulose microfibril patterns in some inflorescence stem tissues. Microtubules have been considered to be the most likely candidates for controlling the orientation of cellulose microfibrils. Recent studies have indeed demonstrated a close association of the plasma membrane-localized cellulose-synthase-complexes (CSCs) that produce cellulose and cortical microtubules. Despite this close association, microtubule disruption did not cause cellulose microfibrils to lose parallel alignment in the radial and inner periclinal walls of cells in the inflorescence stem, suggesting that microtubules influence mechanical properties of cellulose microfibrils other than orientation. X-ray diffraction analysis demonstrated that cellulose crystallinity in wild-type plants declines at the growth-promoting temperature of 29°C, whereas crystallinity fails to adapt and remains high in mor1-1, the temperature-sensitive mutant whose microtubule arrays become disorganized at its restrictive temperature (29°C). This finding suggests that organized microtubules are involved in reducing cellulose crystallinity that normally accompanies increased cell expansion. Live-cell imaging of CSCs by tracking a yellow fluorescent protein (YFP)-tagged CesA6 subunit in hypocotyl cells demonstrated that dynamic and well-organized microtubules affect the velocity, the direction of movement, and the density of CSCs, suggesting that there is a close relationship between microtubules and CSCs. Together with the finding that microtubules also control the distribution of COBRA, a GPI-anchored wall protein that is essential for growth anisotropy, I discuss the variety of roles microtubules play in anisotropic growth.

Growth anisotropy, in which cells grow predominantly in one direction, is common in plant cells, and an essential event for plant form and function. The direction and degree of growth anisotropy are governed by the mechanical properties of the primary cell wall. When aligned in a parallel manner, cellulose microfibrils accommodate great resistance in the direction of their alignment to expansion driven by isotropic turgor pressure. Using the Arabidopsis thaliana inflorescence stem as a model system, field emission scanning electron microscopy (FESEM) analysis demonstrated that the establishment of parallel arrangement of microfibrils is closely correlated with anisotropic cell expansion. In the novel anisotropy 1 (any1) mutant allele of the primary cellulose synthase CesA1, growth defects were correlated with random cellulose microfibril patterns in some inflorescence stem tissues. Microtubules have been considered to be the most likely candidates for controlling the orientation of cellulose microfibrils. Recent studies have indeed demonstrated a close association of the plasma membrane-localized cellulose-synthase-complexes (CSCs) that produce cellulose and cortical microtubules. Despite this close association, microtubule disruption did not cause cellulose microfibrils to lose parallel alignment in the radial and inner periclinal walls of cells in the inflorescence stem, suggesting that microtubules influence mechanical properties of cellulose microfibrils other than orientation. X-ray diffraction analysis demonstrated that cellulose crystallinity in wild-type plants declines at the growth-promoting temperature of 29°C, whereas crystallinity fails to adapt and remains high in mor1-1, the temperature-sensitive mutant whose microtubule arrays become disorganized at its restrictive temperature (29°C). This finding suggests that organized microtubules are involved in reducing cellulose crystallinity that normally accompanies increased cell expansion. Live-cell imaging of CSCs by tracking a yellow fluorescent protein (YFP)-tagged CesA6 subunit in hypocotyl cells demonstrated that dynamic and well-organized microtubules affect the velocity, the direction of movement, and the density of CSCs, suggesting that there is a close relationship between microtubules and CSCs. Together with the finding that microtubules also control the distribution of COBRA, a GPI-anchored wall protein that is essential for growth anisotropy, I discuss the variety of roles microtubules play in anisotropic growth. / Science, Faculty of / Botany, Department of / Graduate

<p>The primary cell wall is a complex multipolymer system whose composite structure has been mostly determined from chemical and biochemical studies. Although the primary cell wall serves a central role, with regard to the connective properties of fibres, knowledge about the interactions among the polymers, when it comes to the mechanical properties, is very limited. The physical properties of the polymers, i.e. their elastic and viscous deformations, as well as the ultrastructure of the polymers, i.e. the interactions among the polymers in the outer fibre wall layers that lead to this behaviour, are still not fully understood.</p><p>The aim of this study was to examine how the different wood polymers, viz. lignin, protein, pectin, xyloglucan and cellulose, interact in the outer fibre wall layers of the spruce wood tracheid. The initial objective was to separate an enriched primary cell wall material from a first stage TMP, by means of screening and centri-cleaning. From this material, consisting of the primary cell wall (P) and outer secondary cell wall (S1) materials, thin sheets were prepared and analysed using a number of different analytical methods. The major measuring technique used was dynamic Fourier transform infra-red (FT-IR) spectroscopy in combination with dynamic 2D FT-IR spectroscopy. This technique is based on the detection of small changes in molecular absorption that occur when a sinusoidally stretched sample undergoes low strain. The molecular groups affected by the stretching respond in a specific way, depending on their environment, while the unaffected molecular groups provide no response to the dynamic spectra, by producing no elastic or viscous signals. Moreover, the dynamic 2D FT-IR spectroscopy provides useful information about various intermolecular and intramolecular interactions, which influence the reorientability of functional groups in a polymer material.</p><p>Measurements of the primary cell wall material, using dynamic FT-IR spectroscopy, indicated that strong interactions exist among lignin, protein and pectin, as well as among cellulose, xyloglucan and pectin in this particular layer. This was in contrast to the secondary cell wall, where interactions of cellulose with glucomannan and of xylan with lignin were dominant. It was also indicated that the most abundant crystalline cellulose in the primary cell wall of spruce wood fibres is the cellulose Iβ allomorph, which was also in contrast to the secondary cell wall, where the cellulose Iα allomorph is more dominant. The presence of strong interactions among the polymers in the primary cell wall and, especially, the relatively high content of pectin and protein, showed that there is a very good possibility of selectively attacking these polymers in the primary cell wall. The first selective reaction chosen was a low degree of sulphonation, applied by an impregnation pretreatment of chips with a very low charge of sodium sulfite (Na2SO3). This selective reaction caused some structural modification of the lignin, a weakening of the interactions between lignin;pectin, lignin;protein and pectin;protein, as well as an increased softening of the sulphonated primary cell wall material, when compared to the unsulphonated primary cell wall material. All this resulted in an increased swelling ability of the material.</p>

The primary cell wall is a complex multipolymer system whose composite structure has been mostly determined from chemical and biochemical studies. Although the primary cell wall serves a central role, with regard to the connective properties of fibres, knowledge about the interactions among the polymers, when it comes to the mechanical properties, is very limited. The physical properties of the polymers, i.e. their elastic and viscous deformations, as well as the ultrastructure of the polymers, i.e. the interactions among the polymers in the outer fibre wall layers that lead to this behaviour, are still not fully understood. The aim of this study was to examine how the different wood polymers, viz. lignin, protein, pectin, xyloglucan and cellulose, interact in the outer fibre wall layers of the spruce wood tracheid. The initial objective was to separate an enriched primary cell wall material from a first stage TMP, by means of screening and centri-cleaning. From this material, consisting of the primary cell wall (P) and outer secondary cell wall (S1) materials, thin sheets were prepared and analysed using a number of different analytical methods. The major measuring technique used was dynamic Fourier transform infra-red (FT-IR) spectroscopy in combination with dynamic 2D FT-IR spectroscopy. This technique is based on the detection of small changes in molecular absorption that occur when a sinusoidally stretched sample undergoes low strain. The molecular groups affected by the stretching respond in a specific way, depending on their environment, while the unaffected molecular groups provide no response to the dynamic spectra, by producing no elastic or viscous signals. Moreover, the dynamic 2D FT-IR spectroscopy provides useful information about various intermolecular and intramolecular interactions, which influence the reorientability of functional groups in a polymer material. Measurements of the primary cell wall material, using dynamic FT-IR spectroscopy, indicated that strong interactions exist among lignin, protein and pectin, as well as among cellulose, xyloglucan and pectin in this particular layer. This was in contrast to the secondary cell wall, where interactions of cellulose with glucomannan and of xylan with lignin were dominant. It was also indicated that the most abundant crystalline cellulose in the primary cell wall of spruce wood fibres is the cellulose Iβ allomorph, which was also in contrast to the secondary cell wall, where the cellulose Iα allomorph is more dominant. The presence of strong interactions among the polymers in the primary cell wall and, especially, the relatively high content of pectin and protein, showed that there is a very good possibility of selectively attacking these polymers in the primary cell wall. The first selective reaction chosen was a low degree of sulphonation, applied by an impregnation pretreatment of chips with a very low charge of sodium sulfite (Na2SO3). This selective reaction caused some structural modification of the lignin, a weakening of the interactions between lignin;pectin, lignin;protein and pectin;protein, as well as an increased softening of the sulphonated primary cell wall material, when compared to the unsulphonated primary cell wall material. All this resulted in an increased swelling ability of the material. / QC 20101123