The activity of protein kinases is heavily dependent on the phosphorylation state of the protein. Kinase phosphorylation states have been prepared through biological or enzymatic means for biochemical evaluation, but the use of protein chemical modification as an investigative tool has not been addressed. By chemically reacting a genetically encoded cysteine, phosphocysteine was installed via dehydroalanine as a reactive intermediate. The installed phosphocysteine was intended as a surrogate to the naturally occurring phosphothreonine or phosphoserine of a phosphorylated protein kinase. Two model protein kinases were investigated on: MEK1 and p38α. The development of suitable protein variants and suitable reaction conditions on these two proteins is discussed in turn and in detail, resulting in p38α-pCys180 and MEK1-pCys222. Designed to be mimics of the naturally occurring p38α-pThr180 and MEK1-pSer222, these two chemically modified proteins were studied for their biological function. The core biological studies entailed the determination of enzymatic activity of both modified proteins, and included the necessary controls against their active counterparts. In addition, the studies on p38α-pCys180 also included a more detailed quantification of enzymatic activity, and the behaviour of this modified protein against known inhibitors of p38α was also investigated. Both modified proteins were shown to be enzymatically active and behave similarly to corresponding active species. The adaptation of mass spectrometry methods to handle the majority of project's analytical requirements, from monitoring chemical transformations to following enzyme kinetics was instrumental in making these studies feasible. The details of these technical developments are interwoven into the scientific discussion. Also included in this thesis is an introduction to the mechanism and function of protein kinases, and on the protein chemistry methods employed. The work is concluded with a projection of implications that this protein chemical modification technique has on kinase biomedical research.

In bacteria, protein synthesis can occur tightly coupled to transcription. In eukaryotes, it is believed that translation occurs solely in the cytoplasm; I test whether some occurs in nuclei and find: (1) L-azidohomoalanine (Aha) – a methionine analogue (detected by microscopy after attaching a fluorescent tag using ‘click’ chemistry) – is incorporated within 5 s into nuclei in a process sensitive to the translation inhibitor, anisomycin. (2) Puromycin – another inhibitor that end-labels nascent peptides (detected by immuno-fluorescence) – is similarly incorporated in a manner sensitive to a transcriptional inhibitor. (3) CD2 – a non-nuclear protein – is found in nuclei close to the nascent RNA that encodes it (detected by combining indirect immuno-labelling with RNA fluorescence in situ hybridization using intronic probes); faulty (nascent) RNA is destroyed by a quality-control mechanism sensitive to translational inhibitors. I conclude that substantial translation occurs in the nucleus, with some being closely coupled to transcription and the associated proof-reading. Moreover, most peptides made in both the nucleus and cytoplasm are degraded soon after they are made with half-lives of about one minute. I also collaborated on two additional projects: the purification of mega-complexes (transcription ‘factories’) containing RNA polymerases I, II, or III (I used immuno-fluorescence to confirm that each contained the expected constituents), and the demonstration that some ‘factories’ specialize in transcribing genes responding to tumour necrosis factor α – a cytokine that signals through NFκB (I used RNA fluorescence in situ hybridization coupled with immuno-labelling to show active NFκB is found in factories transcribing responsive genes).

The self-assembly of structured particles into monodisperse clusters is a challenge on the nano-, micro- and even macro-scale. While biological systems are able to self-assemble with comparative ease, many aspects of this self-assembly are not fully understood. In this thesis, we look at the strategies and rules that can be applied to encourage the formation of monodisperse clusters. Though much of the inspiration is biological in nature, the simulations use a simple minimal patchy particle model and are thus applicable to a wide range of systems. The topics that this thesis addresses include: Encapsulation: We show how clusters can be used to encapsulate objects and demonstrate that such `templates' can be used to control the assembly mechanisms and enhance the formation of more complex objects. Hierarchical self-assembly: We investigate the use of hierarchical mechanisms in enhancing the formation of clusters. We find that, while we are able to extend the ranges where we see successful assembly by using a hierarchical assembly pathway, it does not straightforwardly provide a route to enhance the complexity of structures that can be formed. Pore formation: We use our simple model to investigate a particular biological example, namely the self-assembly and formation of heptameric alpha-haemolysin pores, and show that pore insertion is key to rationalising experimental results on this system. Phase re-entrance: We look at the computation of equilibrium phase diagrams for self-assembling systems, particularly focusing on the possible presence of an unusual liquid-vapour phase re-entrance that has been suggested by dynamical simulations, using a variety of techniques.

Chemical modification of proteins is critical for many areas of biochemistry and medicine. Several methods for site-selective protein modification are reported in this Thesis that are useful in accessing both natural and artificial protein architectures. Multiple, complementary methods for the conversion of cysteine to dehydroalanine are described. Dehydroalanine is used as a general precursor to several post-translational modifications and glycosylation, polyprenylation, phosphorylation, and lysine methylation and acetylation are all accessible. These modifications and their mimics were explored on multiple proteins, including histone proteins. Unnatural modifications were also explored. The first examples of olefin metathesis and Suzuki-Miyaura cross-coupling on protein substrates are reported. Allyl sulfides were discovered to be remarkably reactive substrates in olefin metathesis, allowing use of this reaction in water and on proteins. For Suzuki-Miyaura cross-coupling, a new catalyst is described that is fully compatible with proteins. Both olefin metathesis and cross-coupling allow the formation of carbon-carbon bonds on proteins. The prospects of these transformations in chemical biology are discussed. Finally, a novel strategy is reported for the installation of natural, unnatural, and post-translationally modified amino acid residues on proteins. This technology relies on addition of carbon radicals to dehydroalanine. This method of "chemical mutagenesis" is anticipated to complement standard genetic manipulation of protein structure.

F₁-ATPase, the sector of ATP synthase where the synthesis of cellular ATP occurs, is a rotary molecular motor in its own right. Driven by ATP hydrolysis, direct observation of the rotation of the central axis within single molecules of F₁ is possible. Operating at close to 100% efficiency, F₁ from thermophilic Bacillus has been shown to produce ~40pN˙nm of torque during rotation. This thesis details the groundwork required for the direct measurement of the torque produced by F₁ using a rotary angle clamp, an optical trapping system specifically designed for application to rotary molecular motors. Proof-of-concept experiments will be presented thereby demonstrating the ability to directly manipulate single F₁ molecules from Escherichia coli and yeast mitochondria (Saccharomyces cerevisiae), along with activation of F₁ out of its inhibited state by the application of external torque. Despite in-depth knowledge of the rotary mechanism of F₁ from thermophilic Bacillus, the rotation of F₁ from Escherichia coli is relatively poorly understood. A detailed mechanical characterization of E.coli F₁ will be presented here, with particular attention to the ground states within the catalytic cycle, notably the ATP-binding state, the catalytic state and the inhibited state. The fundamental mechanism of E.coli F₁ appears to depart little from that of F₁ from thermophilic Bacillus, although, at room temperature, chemical processes occur faster within the E.coli enzyme, in line with considerations regarding the physiological conditions of the different species. Also presented here is the verification of the rotary nature of yeast mitochondrial F₁. The torque produced by F₁ from thermophilic Bacillus, E.coli and yeast mitochondria is the same, within experimental error, despite their diverse evolutionary and environmental origins.

Alpha-hemolysin is a pore-forming toxin secreted by pathogenic Staphylococcus aureus. Its spontaneous oligomerization and assembly into a trans-bilayer beta-barrel pore is a model for the assembly of many other pore-forming toxins. It is studied here in vitro as a means to probe general membrane protein oligomerization and lipid bilayer insertion. This thesis details the results of experiments to develop and implement a novel in vitro lipid bilayer system, Droplet-on-Hydrogel Bilayers (DHBs) for the single-molecule imaging of alpha-hemolysin assembly. Chapter 2 describes the development of DHBs and their electrical characterization. Experiments show the detection of membrane channels in SDS-PAGE gels post-electrophoresis and DHBs use as a platform for nanopore stochastic sensing. Chapter 3 describes the engineering and characterization of fluorescently-labelled monomeric alpha-hemolysin for use in protein assembly imaging experiments described in Chapter 6. Chapter 4 describes the characterization of DHB lipid fluidity and suitability for single-molecule studies of membrane protein diffusion. In addition, a novel single-particle tracking algorithm is described. Chapter 5 describes experiments demonstrating simultaneous electrical and fluorescence measurements of alpha-hemolysin pores embedded within DHBs. The first multiple-pore stochastic sensing in a single-lipid bilayer is also described. Chapter 6 describes experiments studying the assembly of alpha-hemolysin monomers in DHBs. Results show that alpha-hemolysin assembles rapidly into its oligomeric state, with no detection of long-lived intermediate states.

Carbon-based materials are poised to be an important class of 21st century materials, for bio-medical, bio-electronic, and bio-sensing applications. Diamond and polymers are two examples of carbon-based materials of high interest to the bio-materials community. Diamond, in its conductive form, can be used as an electrochemical bio-sensor, whilst its nanoparticle form is considered a non-inflammatory platform to deliver drugs or to grow neuronal cells. Polymers, especially when chemically modified, have been used extensively in biological environments, from anti-microbial use to drug delivery. The large-scale use of either material for biological use is limited by two factors: ease of chemical modification and the paucity of knowledge of their surface chemistry in aqueous media. This thesis addresses aspects of both these issues. The first study reported is an in situ study of the adsorption dynamics of an exemplar globular protein (bovine serum albumin, BSA) on nanodiamond using the relatively novel quartz crystal microbalance with dissipation (QCM-D) technique. For the first time, QCM-D enabled the detailed study of protein dynamics (i.e. kinetics, viscoelastic properties, overlayer structure, etc.) onto nanodiamond thin films having various surface chemistry and roughness. The dynamics of protein adsorption is found to be sensitive to surface chemistry at all stages of adsorption, but it is only sensitive to surface roughness during initial adsorption phases. Our understanding of the nanodiamond-biology interface is enhanced by this study, and it suggests that QCM-D is useful for the study of the surface chemistry of nanoparticle forms of inorganic materials. A second study concerns a novel surface functionalization scheme, based on carbene and azo-coupling chemistry, which has been recently introduced as a practical, facile method for modifying the surfaces of polymers. Using modern surface characterization techniques, it is demonstrated that a chemical linker can be attached to polystyrene surfaces using carbene-based chemistry, and that further chemical functionality can be added to this chemical linker via an azo-coupling reaction. In situ studies of protein dynamics at these interfaces were conducted using QCM-D, thus enabling a link between specific protein behaviour and the polymer surface chemical termination chemistry to be made. A third area of study of investigates the use of diamond electrodes as a bio-sensor for dopamine under physiological conditions. For these conditions, ascorbic acid interferes with the dopamine oxidation signal, in ways that render the two signals irresolvable. Various modifications are used in attempts to reduce this interference, including: small and large cathodic treatments, grafting of electro-active polymers, addition of carbon nanotubes, and hydrogen plasma treatment. Those modifications leading to the hydrogen-termination of diamond are shown to work the best. Notably, hydrogen plasma treatment effects the complete electrochemical separation of dopamine and ascorbic acid at a diamond electrode. This is the first time this has been accomplished without adding non-diamond materials to the diamond electrode surface.

Kinks are functionally important structural features found in the alpha-helices of many proteins, particularly membrane proteins. Structurally, they are points at which a helix abruptly changes direction. Previous kink definition and identification methods often disagree with one another. Here I describe three novel methods to characterise kinks, which improve on existing approaches. First, Kink Finder, a computational method that consistently locates kinks and estimates the error in the kink angle. Second the B statistic, a statistically robust method for identifying kinks. Third, Alpha Helices Assessed by Humans, a crowdsourcing approach that provided a gold-standard data set on which to train and compare existing kink identification methods. In this thesis, I show that kinks are a feature of long -helices in both soluble and membrane proteins, rather than just transmembrane -helices. Characteristics of kinks in the two types of proteins are similar, with Proline being the dominant feature in both types of protein. In soluble proteins, kinked helices also have a clear structural preference in that they typically point into the solvent. I also explored the conservation of kinks in homologous proteins. I found examples of conserved and non-conserved kinks in both the helix pairs and the helix families. Helix pairs with non-conserved kinks generally have less similar sequences than helix pairs with conserved kinks. I identified helix families that show highly conserved kinks, and families that contain non-conserved kinks, suggesting that some kinks may be flexible points in protein structures.

In addition to a central circadian clock in the suprachiasmatic nucleus (SCN), zebrafish (Danio rerio) have local clock systems in their peripheral tissues. These peripheral tissues express a complement of clock genes that can be synchronized with the 24 h light/dark cycle and thus may be entrained by light. To date, teleost multiple tissue (tmt) opsin identified from Fugu rubripes and Danio rerio is the only opsin that has been proposed as a candidate to mediate this cellular photoentrainment (Moutsaki et al., 2003). Here we report the discovery of a multigene family of tmt opsins found not only in the teleost fishes, but in vertebrates,including amphibians, birds, reptiles, and some mammals. Phylogenetic analysis demonstrated that this gene family consists of three main classes, tmtI, tmtII and tmtIII, with each duplicating further to give two paralogues in the zebrafish genome. Their predicted amino acid sequences contain most of the characteristic features for the function of a photopigment opsin, as well as seven transmembrane segments indicative of a G protein coupled receptor (GPCR) superfamily. Significantly, reverse transcription polymerase chain reaction (RT-PCR) reveals that the tmt opsin genes in zebrafish are both temporally and spatially regulated. To investigate if these tmt photopigments mediate light-activated currents in cells, each opsin was expressed in vitro and the responses characterised by calcium imaging, whole-cell patch clamp electrophysiology, UV-Vis spectrophotometric analysis, and bioluminescence reporter assay. Collectively, these data suggest that some of the opsin photoproteins signal via Gi-type G protein pathway. Interestingly, the spectral analysis obtained shows that most tmt opsins tested are UV-sensitive when reconstituted in vitro with 11-cis and all-trans retinal, indicating an intrinsic bistable dynamics. Using site directed mutagenesis on one of the tmt opsins, tmt10, the potential spectral tuning sites involved in UV detection were tested. As part of this study, tmt opsin cDNAs were isolated from three populations of Mexican tetra (Astyanax mexicanus): surface, Pachon and Steinhardt. This allowed for a direct comparison between the tmt opsins present in the dark adapted species (cavefish) versus those of the light adapted species (zebrafish). It is hoped that the findings from this project will contribute to our understanding of non-visual light detection in fish and the evolution of their non-image forming photoreception.

Membrane protein mechanotransduction is the altered function of an integral membrane protein in response to mechanical force. Such mechanosensors are found in all kingdoms of life, and increasing numbers of membrane proteins have been found to exhibit mechanosensitivity. How they mechanotransduce is an active research area and the topic of this thesis. The methodology employed is classical molecular dynamics (MD) simulations. MD systems are complex, and two programs were developed to reduce this apparent complexity in terms of both visual abstraction and statistical analysis. Bendix detects and visualises helices as cylinders that follow the helix axis, and quantifies helix distortion. The functionality of Bendix is demonstrated on the symporter Mhp1, where a state is identified that had hitherto only been proposed. InterQuant tracks, categorises and orders proximity between parts of an MD system. Results from multiple systems are statistically interrogated for reproducibility and significant differences at the resolution of protein chains, residues or atoms. Using these tools, the interaction between membrane and the Escherichia coli mechanosensitive channel of small conductance, MscS, is investigated. Results are presented for crystal structures captured in different states, one of which features electron density proposed to be lipid. MD results supports this hypothesis, and identify differential lipid interaction between closed and open states. It is concluded that propensity for lipid to leave for membrane bulk drives MscS state stability. In a subsequent study, MscS is opened by membrane surface tension for the first time in an MD setup. The gating mechanism of MscS is explored in terms of both membrane and protein deformation in response to membrane stretch. Using novel tension methodology and the longest MD simulations of MscS performed to date, a molecular basis for the Dashpot gating mechanism is proposed. Lipid emerges as an active structural element with the capacity to augment protein structure in the protein structure-function paradigm.