This thesis is focusing on the use of the finite element method (FEM) in program environment of Autodesk Inventor Professional (AIP) 2010. For the analysis of the components or assemblies with FEM serves the Strength analysis module of the AIP 2010, whose environment and functions are detailed in this thesis. At the conclusion practical examples of modal and static analysis on the synchronous generator rotor model are demonstrated including a brief evaluation of the results.

This master‘s thesis deals with problems of optimization of cooling in electrical machines. This work includes introduction to the theory of mathematical optimization and brief introduction to optimization problems. This thesis deals with using of program Ansys Workbench for the thermal analysis in electrical machines and optimization of their cooling. Thesis contains thermal analyse of specific asynchronous motor with the squirrel cage and optimization of its cooling.

This thesis deals with the possibility of using the finite elements method for the analysing of synchronous permanent magnets machines. The aim of this work is to discuss the possibility of the machine design more effectively with using the finite elements method and Maxwell software for the simulations. On the created parametric model, simulations were performed according to master thesis assignment. The aim of this work is to determine induced voltage, iron losses, machine inductances and make a permanent magnets demagnetization analysis. From simulations results the machine efficiency is calculated. The parametric model was used for the optimization of selected parameters. From results of optimization new dimensions of permanent magnets was obtained. Machine efficiency was increased by new permanent magnet material and optimized design.

This thesis aims at automotive starters, their construction, characteristics and problems with starting at low temperatures. There are kinds of starters, function principle, construction, advantages and disadvantages in the first part of thesis. Issues with combustion engine starting and basic technical requirements are also mentioned here; characteristics and importance of starters and combustion engines are also described. Last chapters of this part are dedicated to finite element method and its implication. There are analytical calculations of starter in the second part of thesis. Results are compared with experimental obtained (measured) values and results from RMxprt. Finite element method results are compared, too. Magnetic induction improvement in stator is also suggested.

Permanent magnet synchronous machine (PMSM) are widely used in many industrial applications. This thesis starts with familiarization with the properties and structure of each type of synchronous machines with permanent magnets. Subsequently there are described properties and possible division of AC winding types. Afterward analytical designs of four machines with two different types of winding were realized. These designs were compared by means of simulations using the RMxprt program and their properties were subsequently verified by method of finite element using the Maxwell 2D program. Evaluation and comparison in terms of utility properties for all designs of machines were performed at the conclusion of this thesis.

Diploma thesis is focused on modeling rotor downwash generated by the main rotor of helicopter and analyzing its effects on the roof structure. Theoretical definition of rotor downwash flow is described in the first part of the text. Governing equations of computational fluid dynamics are briefly explained as well as boundary layer and finite volume method. Next part inquires into numerical simulation of rotor downwash based on height of rotor above the roof, shape of roof plane and climatic conditions. Results are compared with climatic load values provided by actual Czech construction standard in the end of the text.

Construction of structural computational model of the tank with fluid using program package ANSYS based on the Finite Element Method. Solve eigen-vibration of the tank with or without effects of fluid. Application of Euler and Lagrange method for modeling fluid. Solve seismic response using response spectra. Verify of the tank in accordance to EC 3 and EC8.

This thesis deals with static and dynamic analysis of an lookout tower construction. For dynamic analysis a computational model in ANSYS software is created. Static analysis is performed by Scia Engineer software. Both of this software use finite element method. It is also focused on wind load determination by Eurocode 1, structural factor calculation, modal analysis and vortex shedding. Verification of selected parts according to Eurocodes is included.

This thesis mainly deals with modeling and static analysis of the ceiling structure in the basic environment of ANSYS. The first part is focused on verifying correctness of the model most stressed parts of the structure with a simple hand-static calculation by the process of stress on a continuous beam. The main part is devoted to modeling composite structure, element types, specifying loads and boundary conditions by ANSYS FEM program. In the end, there are the results of stress and deflection presented, and the structure is evaluated at the ultimate limit state and serviceability limit state.

The master thesis covers several issues linked to a substitution of headlamp screw fixation by a plastic nail. The thesis includes an analysis of the headlamp technology, including description of the prescribed durability tests. On the basis of the analysis some new designs of plastic nails are proposed, consistent with characteristics of plastic materials. Selected outcomes of the analysis have been tested as prototypes and verified with Finite Elements Method in SimDesigner including 3D modeling capabilities provided by the Catia V5. The feasibility study regarding a casting form of the new design of plastic nails and technical economic valuation for contingent assembly mounting is included in the thesis.