Spelling suggestions: "subject:"punchthrough current"" "subject:"puncthrough current""
1 |
A High Density Non-Classical Unipolar CMOS with Two Embedded Oxide NMOS LoadLin, Chia-Hsien 25 July 2012 (has links)
In this thesis, we propose a high density non-classical unipolar CMOS width two embedded oxide (2EO) NMOS load. The words ¡§unipolar CMOS¡¨ refer to the fact that the conventional NMOS driver and the proposed 2EO NMOS load are presented in which the electron is the only carrier used. Among them, the 2EO scheme is used to isolate the inversion current. And the dominant current in the 2EO NMOS load is the punch through current which is not a destructive current mechanism. Our proposed CMOS, due to the same carrier used, does not have to compensate the layout width in load design. In addition, the shared terminal of output contacts and the elimination of N-well technique are also presented in our proposed CMOS. Therefore, the layout area can be reduced 72%, in comparison with conventional CMOS. Furthermore, the packing density can be increased and the fabrication cost can be reduced, respectively. We also find out that the delay time can be improved 39% to increase the operating frequency, as compared with the convention CMOS.
|
2 |
A Study of High-Speed Non-Classical Unipolar CMOS with a Thick Sidewall-Spacer Gate-Oxide NMOS LoadWang, Shih-Wei 25 July 2012 (has links)
In this thesis, we present a high-speed non-classical unipolar CMOS with a thick sidewall-spacer gate-oxide NMOS load. This unipolar CMOS is composed of a NMOS driver and a thick sidewall-spacer gate-oxide NMOS which replaces a PMOS as load. We focus on the investigation of punch-through current in unipolar CMOS trends. In addition, we also design a conventional CMOS for comparison.
According to the simulations, the logical characteristics of our proposed CMOS are valid, in which the average propagation delay time is improved 20 % compared with the conventional CMOS. This is due to the presence of a thick sidewall-spacer gate-oxide NMOS load. For the viewpoint of device fabrication, the N well process can also be eliminated. This means that the proposed NMOS load not only improves the CMOS speed, but also reduces the fabrication cost. Thus, because of the shared-terminal output, the layout area can be significantly decreased 41 %, in comparison with the conventional CMOS.
|
Page generated in 0.0375 seconds