This thesis deals with design of steel structure multi-storey garage. It is the five-storey steel structure of rectangular plan. The construction is designed for the city of Olomouc. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer 18. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation

The aim of the final thesis is to design and structural design report of selected elements of prefabricated storage hall. Processing of foundation drawing, element composition and for each designed element formwork drawing and reinforcement. It is a single-storey hall, where the main structural system consists of a transversal frame columns and prestressed girder. In this final thesis I designed and structural assessed prestressed girder, reinforced concrete purlin, roof bracing, column, grade beam and foundation pad. The calculation software Scia Engineer is used to calculate the effects of internal forces. The results are compared using a simplified method. The design and structural assessment are made according to valide standards. The designed construction complies with the limit state of ultimate and serviceability.

Design of a steel supporting structure for one-storeyed hall based on ground plan of 60 x 80 m, clear height 10 m and total height 13,3 m. In the front part there is along the whole widht designed two-storeyed skeleton structure penetrating into the hall. From the second floor rods supported frontal part which exceeds ground plan by 2 m and on the right side is closed by pre-set cylindric structure with radius 8,6 m which covers the right frontal corner of building. The cylindric structure is around its perimeter distanced max 3,6 m from hall grand plan and is supported by posts. Both spaces had saddle roof with 8% slant, gutter edge in height 11,6 m, top line in height 12,8 m. Walls are around perimeter closed by horizontal atic in height of 13,3 m. Shape and dimensional design, load specification – stady, utility, climacic load. Calculation of imide forces and further static dimensioning of the main supporting elements and selected details. Elaboration of design documentation (dosposition, production drawing of the anchorage plan, details definited by project supervizor).

The theme of this Master´s thesis is to design and assess the load Bering steel structure of the hippodrome in Napajedla. The hippodrome is solved as a hall object in two alternatives. Both alternatives are elliptical in shape with dimensions of 40 and 80 m. Load bearing structure of the chosen alternative is formed by transversely oriented column binding with the axial spacing of 6,0 m. Transversely oriented binding is formed from spatial lattice truss supported by fixed solid columns. The spatial rigidity of the structure is ensured by fixing columns in the transverse direction and by using transverse braces in the longitudinal direction. The longitudinal braces help to ensure the spatial rigidity. The work consists of the design and assessment of the main load bearing components, the solution of chosen details of joints and columns´ anchoring, solution of construction component and the elaboration of statement of material and drawings´ documentation.

Design of load bearing steel structure of a curling building. Examination of main load bearing building blocks. Examination of selected details. Drawing of disposition and selected details. Elaboration of manufactory drawings of chosen segments.

The building will be situated by the village Slupečná near the Lipno dam and located on the land that slopes to the south. It’s designed as a separately standing, four-storey. The technology of implementation is a brick. The construction system is designed as a longitudinal wall system stiffened in the transverse direction inner supporting walls. The concrete breeze blocks from the company BS Klatovy are used as main building material. Basic constructions are designed as planar and out of plain concrete and reinforced concrete. Stiff reinforced concrete prefabricated and prefamonolitic ceiling constructions from the company BS Klatovy are designed. Roofing is designed with tilt roof. The bearing construction is made up of purlin system of wood truss. Height of the roof ridge, including the covering is +13.650 m (considering relative height of 0.000). The height of the chimney head is +14.400 m. Profiled metal roof covering Lindab Goodlock is designed.

This thesis deals with design of a multi-purpose sports hall. The aim of this work is to design a support structure with a diameter of 80.0 m at ± 0.000. Construction of a circular layout in the level of ± 0.000 of an external diameter 80.0 m. Height of the hall at the top is 20.0 m Indoors girders is solved in 36 beams which meet at the middle of the rings. Ensure the stability of bracing. Anchoring is done by pin connections located at the bottom of the strip, anchored in concrete bases through the base plate and pre-concreted anchor bolts.

The aim of the thesis is the assessment of steel structure roofing winter stadium in Jihlava city and design of the variant solution of load bearing steel structure of the roof. The ground plan dimensions are 60 x 84 m The current structure is composite of truss main girders with parabolic lower chords, and purlins . Axial distances of main girders are 12 m and are supported on concrete columns. The alternative proposed solution uses arched truss main girders and truss purlins. They are supported on existing concrete columns. All load bearing members of existing and new design structure – main girders, purlins, roof bracing - have been evaluated according to actual normative rules. It is evident that the static assessment of the existing structure is satisfied from viewpoint of ultimate and serviceability limit states. The static assessment of the new structure is satisfied from the viewpoint of both limit states.

The diploma thesis describes the design and assessment of steel structure of the roofing of the military museum in Králíky. The supporting structure of hall is 40.00 meters span. The total layout are 55.93 x 72.04 m, building height 11.43 m, 16.11 m pylon height. Main construction material is steel, grade S355, secondary constructions are made from steel grade S235, rods are made from steel grade S460. I did optimization of steel structure and chose the best option. For this option I made detailed structural analysis. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes which hang on rods on a sloped pylon. Part of the report is open-air roofing.

In my diploma thesis the proposal is developed as supporting steel structure sports hall with dimensions 45 x 54 m, a maximum height of 15.5 meters,for the area of Znojmo. In a static calculation are designed and assessed the main bearing structural components such as solid panel purlins, spatial lattice truss, bracing and solid panel columns, which together with the truss form create a crosslinks, column bases and anchoring, plus Tribune.The work includes the design documentation consisting of a layout drawing, drawing anchoring and drawing selected details.