This thesis deals with the design and assessment of the wooden footbridge. The structure is designed for the locality of the village Loučná nad Desnou acrros the river Desná. Span of the footbridge is 30m, and the width is 4m. The footbridge is covered with a saddle roof. The main supporting elements are two triple joint arcs with intermediate bridge deck. The bridge deck is made of two main beams and nine cross members, with always two longitudinal members in between them. Roofing is of nine cross-bindings, which are connected by purlins and top purlin. The stability of the whole structure is stiffened by the horizontal longitudinal stiffeners in the top and bottom surface and vertical longitudinal stiffener in the roof. The main load-bearing elements are made of glued laminated timber, the other elements are made of solid timber. Stiffeners are made of steel rods.

Master´s thesis describes the design and check of the construction of botanical pavillion in Brno. The structure has an elliptical ground plan with dimensions 34 x 20 m, height of 9 m. The supporting structure consists of 16 support curved ribs which are braced at the top of the elliptical steel ring. Between the ribs are inserted purlins which support the perimeter cladding. The supporting structure is designed as an alternative system as girders of glued laminated timber and as system of steel truss girders.

This diploma thesis deals with the design expertise and supporting structures the single-roof sports hall for locality Brno. The ground plan dimensions are 42 x 72 m and ground clearance of about eight meters. Two variants are processed and selected variant is elaborated in detail. The sports hall is designed for most sports played indoors. In a static calculation are designed and assessed the main load-bearing elements such as truss glued laminated timber, wooden purlins, columns, girts and bracing. The work includes drawings.

The aim of the thesis is the design and the assessment of an administrative center in Vimperk. The building is divided into three height levels, the highest has 7 floors. The building is rectangular floor plan with dimensions of 102,5 x 48,0 m. The construction is designed as framing with truss roofing, bracing and purlins for attaching sheathing.

The subject of this thesis is the conversion and alternative proposal to the existing steel structure roofing the winter stadium in Jindrichuv Hradec. The building has a rectangular plan with dimensions of 80 x 52 m. The roof structure consists of lattice trusses and purlins, plotted using lattice steel columns. The other possibilities are parabolic lattice trusses and purlin with fly bracing that were designed and evaluated in accordance with applicable standards. The solution using parabolic trusses is designed on the original footprint of the structure. The distance of each bond is 8 m.

The subject of this diploma thesis is the design and assessment of main load-bearing elements od the steel structure of shopping gallery in Hodonín. Part of floor plan is rectangular and rest of it is half-circled. Object's dimensions are 7é m x 147,75 m (and roof overhang 1,5 m on each side), the height of the ridge is 13,43 m and the height of the roof's dome is 22,70 m. It's a two-storey building. The load-bearing structure consist of pin-suported columns, in this case there is max. 8,5 m distance between them in direction of main frame. The distance between main frames is 9 m. The spatial rigidity of the structure is ensured with floor slabs and system of bracings. The cladding consists of sandwich panels, roof's fanlights and dome of glazed areas. Most of elements are made of S355 steel.

This Master’s thesis is focused on the design and structural analysis of load-bearing structure of a multipurpose hall that is strained by the permanent load, working load and climatic load. The hall has the shape of an elliptical dome. Maximum margin of the structure is 60,0m and maximum height is 18,0m. Main carrier elements of the structure are radially arranged curved beams made of glued laminated timber, class SA(GL24).

The theme of the master’s thesis is to design wooden roof structure three-aisled building in Brno. The proposal is developed up according to standards ČSN EN. The thesis solves the static effect of the wooden structure, design of parts, and materials design. Plan dimensions are 51x14m, maximal height is 11,9m. The structure is designed for ultimate limit states and serviceability. The supporting structure is designed as solid wooden arched trusses frames's connection to the wooden pole. The thesis solve also details and solution design.

The Master´s thesis is focused on the design and structural analysis of the hall serving for businnes and exhibitons purposes that is strained by the permanent load, climatic and operational load. The construction is located in the area Opava. The hall is designed as intersection of two domes. The diametr of smaller one is 38,0 m and diametr of bigger one is 50,0 m. Maximum high of the construction reach 15,150 m. The main carrier elements of the structure are beams made from glued laminated timber, class GL24h.

This thesis describes the design of a project Family Winery VILARO in Velké Bílovice. It consists of two objects. The first is a guesthouse with a restaurant and the second is a production building with a tasting room. The guesthouse is submitted in the stage of building design. Production facility, a winery, is discussed further as the implementation project. The winery is located in a slightly sloped terrain. It has one partially cellared ground floor. The roof is atypical, one part is sloped triple-coated shed roof, second part is flat with stabilizing layer. The support systém mainly consists of brick blocks, ferroconcrete walls, ferroconcrete boards, ferroconcrete beam ceiling and prestressed concrete ceiling panels Spiroll. The project assumes using of typical building materials.