Spelling suggestions: "subject:"quantum well mixing(QWI)""
1 |
Semiconductor Laser using Sputtered SiO2 and Quantum Well IntermixingChen, Rui-Ren 24 August 2011 (has links)
In this work , impurity free vacancy diffusion (IFVD) quantum well intermixing(QWI) technology by high thermal-expansion-induced stress is used to perform bandgap engineering. In this paper, 1530nm InGaAsP
multiple QWs sandwiched by p-InP (2£gm thickeneess, top) and n-InP (bottom) material is used as testing material structure also laser fabrication material, where contact materials (InGaAs and InP) on p-InP
are used for comparison. By the difference between thermal expansion coefficients of SiO2 on the different material (InGaAs, InP), large different behaviors of QWI are observed, while low different dependence on defects created by ion-implantation is found. Above 70nm photo luminance (PL) wavelength shift of InGaAsP MQW below 2£gm thick InP is realized in this method. Further more, CW in-plane laser structures are also successfully fabricated and demonstrated by such QWI, giving the same shift as PL. It shows that good qualify of material can be obtained in such QWI method. Using local deposition of SiO2 causes different bandgap materials, re-growth free processing for monolithic integration can be expected, offering a powerful scheme of QWI for bandgap
engineering.
|
2 |
Bandgap Engineering of 1300 nm Quantum Dots/Quantum Well Nanostructures Based DevicesAlhashim, Hala H. 29 May 2016 (has links)
The main objectives of this thesis are to develop viable process and/or device technologies for bandgap tuning of 1300-nm InGaAs/GaAs quantum-dot (QD) laser structures, and broad linewidth 1300-nm InGaAsP/InP quantum well (QW) superluminescent diode structures. The high performance bandgap-engineered QD laser structures were achieved by employing quantum-dot intermixing (QDI) based on impurity free vacancy diffusion (IFVD) technique for eventual seamless active-passive integration, and bandgap-tuned lasers. QDI using various dielectric-capping materials, such as HfO2, SrTiO3, TiO2, Al2O3 and ZnO, etc, were experimented in which the resultant emission wavelength can be blueshifted to ∼ 1100 nm ─ 1200 nm range depending on process conditions. The significant results extracted from the PL characterization were used to perform an extensive laser characterization. The InAs/GaAs quantum-dot lasers with QDs transition energies were blueshifted by ~185 nm, and lasing around ~1070 – 1190 nm was achieved. Furthermore, from the spectral analysis, a simultaneous five-state lasing in the InAs/InGaAs intermixed QD laser was experimentally demonstrated for the first time in the very important wavelength range from 1030 to 1125 nm. The QDI methodology enabled the facile formation of a plethora of devices with various emission wavelengths suitable for a wide range of applications in the infrared. In addition, the wavelength range achieved is also applicable for coherent light generation in the green – yellow – orange visible wavelength band via frequency doubling, which is a cost-effective way of producing compact devices for pico-projectors, semiconductor laser based solid state lighting, etc. [1, 2]
In QW-based superluminescent diode, the problem statement lies on achieving a flat-top and ultra-wide emission bandwidth. The approach was to design an inhomogeneous active region with a comparable simultaneous emission from different transition states in the QW stacks, in conjunction with anti-reflection coating and tilted ridge-waveguide device configuration. In this regard, we achieved 125 nm linewidth from InGaAsP/InP multiple quantum well (MQW) superluminescent diode with a total output power in excess of 70 mW with an average power spectral density of 0.56 mW/nm, and a spectral ripple of ≤1.2 ± 0.5 dB. The high power and broadband SLD with flat-top emission spectrum is a desirable as optical source for noninvasive biomedical imaging techniques employing low coherence interferometry, for instance, optical coherence tomography (OCT).
|
Page generated in 0.111 seconds