published_or_final_version / Earth Sciences / Doctoral / Doctor of Philosophy

published_or_final_version / Earth Sciences / Doctoral / Doctor of Philosophy

No description available.

No description available.

The work described in this thesis is a study of imperfections in high purity, low dislocation content synthetic quartz single crystals which are grown on a commercial scale by the General Electric Company. Hydrogen and metal ion impurities in quartz were studied using low temperature transmission Fourier Transform Infrared Spectroscopy, (FTIR). Incorporation of impurities in quartz was investigated using crystals which were doped with Al, Fe, Cr, Co, Ti, P, Cu and K. Orientation of hydroxyl impurities was determined using polarised infrared spectroscopy. Deuterated quartz crystals were grown and studied as analogues to high purity crystals. X-ray diffraction topography was used to evaluate crystal quality and to perform a study of quartz which had been treated by electrodiffusion, or sweeping. Crystal lattice strain and sweeping damage was studied using double crystal topography at the Synchrotron Radiation Source, (SRS), at the Daresbury Laboratory. Metal ion impurities were sh own to incorporate interstitially into quartz crystals. The only exceptions were aluminium and iron, which incorporated substitutionally. All the impurities studied introduced hydrogen impurities such as hydroxyl ions and water molecules into quartz. A relationship between impurity concentration and hydrogen content was clearly indicated. The 3200 cm-1 broad absorption band characteristic of impure and fast grown synthetic quartz was strongly implicated as being due to interstitially incorporated water molecules. The major hydrogen impurities in quartz were sodium hydroxide molecules which were preferentially aligned along the X, Y and Z growth axes. Hydroxyl ions were not incorporated directly from the growth solution. Sweeping was shown to induce the formation of a negative space charge in treated quartz which gave rise to inhomogeneous lattice strain. The strain was gradually relieved upon prolonged exposure to x-rays. A mechanism for the production and relief of lattice strain has been proposed. Sweeping produced surface damage on mechanically polished crystals but not on those treated by chemical polishing using hydrofluoric acid. No further detrimental effects of sweeping were observed. Double crystal topographic studies revealed two possible bulk defects in Quartz. The first of these was a previously unreported planar defect parallel to the X-Y plane of quartz. The second was possibly a planar defect associated with the cellular growth cells in the (00.1) growth sector of quartz. The validity of these observations was put in doubt by the possibility of defect projection from the silicon monochromator which had been used in double crystal studies.

M.Sc. (Geology) / Please refer to full text to view abstract

In the medical world the precise identification of a disease can take longer than it is safe to wait to start treatment so there is a need for faster and more precise biosensors. Bond Rupture is a new sensor technique that maybe able to improve disease detection. It does this by inducing bonds to rupture from the surface, and also measuring the point at which this rupture occurs this enables the forces to be measured on the surface. Specifically, this project has focused on the application of Bond Rupture to detecting antigens when bound to a surface using their specific antibodies, and the idea that the rupture force of these antigens can also be measured. The sensor that this project is based around is the Quartz Crystal Microbalance (QCM), which oscillates horizontally when a voltage is applied, and can also be used to measure mass change on its surface via change in resonant frequency. The aim of this project was to investigate possible Bond Rupture detection methods and techniques and has involved the development of a high speed digital electronics system, for the purposes of inducing and detecting Bond Rupture. This has involved the development of a FPGA based high speed transceiver board which is controlled by a Digital Signal Processor (DSP), as well as the development of various graphical user interfaces for end user interaction. Bond rupture testing was carried out by rupturing beads from the surface of a QCM in an experiment taking as little as 20 seconds. The Bond Rupture effect has been observed via the high accuracy measurement of the frequency change while inducing Bond Rupture on the sensor, proving that the Bond Rupture effect indeed exists. The research performed is believed to be a world first in terms of the method used and accuracy acquired.

Thesis (M.S.)--University of Wisconsin--Madison, 1984. / Typescript. Title from title screen (viewed Mar. 27, 2007). Includes bibliographical references (leaves 47-50). Online version of the print original.

Thesis (Ph. D.)--University of Hong Kong, 2001. / Includes bibliographical references (leaves 192-198).

Thesis (PH.-D.)--University of Michigan, 1904. / Cover title. "Reprinted from the Physical review, vol. XX, no. 1, January, 1905.2.