561 |
Novel adaptive time-domain techniques for the modeling and design of complex RF and wireless structuresBushyager, Nathan Adam. January 2004 (has links)
Thesis (Ph. D.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2005. / Tentzeris, Manos, Committee Chair ; Laskar, Joy, Committee Member ; Peterson, Andrew, Committee Member ; Papapolymerou, Ioannis, Committee Member ; Sotiropoulos, Fotis, Committee Member. Vita. Includes bibliographical references.
|
562 |
Analog/RF VLSI layout generation : layout retargeting via symbolic template /Jangkrajarng, Nuttorn. January 2006 (has links)
Thesis (Ph. D.)--University of Washington, 2006. / Vita. Includes bibliographical references (leaves 97-102).
|
563 |
A dynamic, perimeter based, community-centric access control systemChapman, Adam Scott. Burmester, Mike. January 2006 (has links)
Thesis (M.S.)--Florida State University, 2006. / Advisor: Mike Burmester, Florida State University, College of Arts and Sciences, Dept. of Computer Science. Title and description from dissertation home page (viewed June 15, 2006). Document formatted into pages; contains viii, 48 pages. Includes bibliographical references.
|
564 |
CMOS-compatible nonvolatile memories for radio frequency identification (RFID) applications /Barsatan, Randy. January 2006 (has links)
Thesis (M.Phil.)--Hong Kong University of Science and Technology, 2006. / Includes bibliographical references (leaves 82-84). Also available in electronic version.
|
565 |
RFID as an enabler of improved manufacturing performanceHozak, Kurt. January 2007 (has links)
Thesis (Ph. D.)--Ohio State University, 2007. / Full text release at OhioLINK's ETD Center delayed at author's request
|
566 |
Printability and environmental testing using silver-based conductive flexographic ink printed on a polyamide substrate /Cole, Kathryn O. January 2007 (has links)
Thesis (M.S.)--Rochester Institute of Technology, 2007. / Typescript. Includes bibliographical references (leaves 84-86).
|
567 |
Personal Privacy Protection within Pervasive RFID EnvironmentsHedefine, Eeva Kaarina January 2006 (has links) (PDF)
No description available.
|
568 |
Κάτω μεταλλάκτης στην μικροκυματική περιοχή 1-6 GHz με χρήση κατανεμημένου ενισχυτήΛιώλης, Σπυρίδων 20 April 2011 (has links)
Το αντικείμενο της παρούσης διπλωματικής επικεντρώνεται στη σχεδίαση ανάπτυξη και μέτρηση κυκλώματος κάτω μεταλλάκτη (down converter) συχνότητας στην περιοχή 1 έως 6 GHz. Η αρχιτεκτονική περιλαμβάνει ενισχυτή χαμηλού θορύβου (LNA) κατανεμημένης τοπολογίας (distributed amplifier), μίκτη καθώς και ενισχυτές και φίλτρα στην ενδιάμεση συχνότητα. Ο σχεδιασμός συνοδεύεται από μετρήσεις όπου και διαπιστώνεται η σύγκλιση με τα αποτελέσματα εντατικών εξομοιώσεων. Κύρια εργαλεία του σχεδιασμού απετέλεσαν κυκλωματικοί και ηλεκτρομαγνητικοί εξομοιωτές. / The object of this thesis focuses on design development and measurement down converter circuit in the frequency range 1 to 6 GHz. The architecture includes low noise amplifier (LNA) Distributed topology (distributed amplifier), mixer and amplifiers and filters in intermediate frequency. The design is accompanied by measurements and found where the convergence of the results of intensive simulations. Main tools of design were kyklomatikoi and electromagnetic simulators.
|
569 |
Evaluation of Doherty Amplifier ImplementationsJansen, Roelof 03 1900 (has links)
Thesis (MScIng)--Stellenbosch University, 2008. / ENGLISH ABSTRACT: Modern communication systems demand efficient, linear power amplifiers. The amplifiers are
often operated in the backed-off power levels at which linear amplifiers such as class B amplifier
are particularly inefficient. The Doherty amplifier provides an improvement as it increases efficiency
at backed of power levels. Doherty amplifiers consists of two amplifiers, a carrier amplifier
and a peaking amplifier, of which the output is combined in a novel way. Implementation of
the Doherty amplifier with transistors is not ideal. One of the main problems is the insufficient
current production of the peaking amplifier at peak envelope power (PEP) if it is implemented
as a class C amplifier. A suggested solution to this problem is a bias adaption system that
controls the peaking amplifier gate voltage dynamically depending on the input power levels.
The design and evaluation of such a adaptive Doherty amplifier is the main goal of this thesis.
A classical Doherty amplifier with and an uneven Doherty amplifier with unequal power division
between the carrier and peaking amplifiers are also evaluated and compared with the adaptive
Doherty amplifier.
The amplifiers are designed using a 10 W LDMOS FET device, the MRF282. The adaptive
Doherty amplifier and the uneven Doherty amplifier show significant improvements in efficiency
and output power over the even Doherty amplifier. At PEP the adaptive Doherty delivers 42.4
dBm at 39.75 % power added efficiency (PAE), the uneven Doherty amplifier 41.9 dBm at 40.75
% PAE and the even Doherty amplifier 40.8 dBm at 38.6 % PAE. At 3dB backed-off input power
the adaptive Doherty amplifier has an efficiency of 34.3%, compared to 34.9 5% for the uneven
Doherty amplifier and 29.75 % for the even Doherty amplifier. / AFRIKAANSE OPSOMMING: Moderne kommunikasie stelsels vereis effektiewe, linieêre drywing versterkers. Die versterkers
word dikwels in laer drywings vlakke bedryf waar linieêre versterkers soos ’n klas B versterker
besondere lae effektiwiteit het. Die Doherty versterker bied ’n uitweg omdat dit verbeterde
effektiwiteit by lae drywings vlakke bied. ’n Doherty versterker bestaan uit twee versterkers, die
hoof versterker en die aanvullende versterker, waarvan die uittrees met ’n spesiale kombinasie
netwerk bymekaar gevoeg word. Die implementasie van Doherty versterkers met transistors is
nie ideaal nie. Een van die hoof probleme is die onvoldoende stroom wat deur die aanvullings
versterker gebied word by piek omhulsel drywing (POD). ’n Oplossing vir die probleem is om ’n
aanpassings sisteem te gebruik wat die aanvullende versterker se hekspanning dinamies beheer
afhangende van die intree drywings vlakke. Die ontwerp en evaluasie van so ’n aanpassings
Doherty versterker is die hoof doel van hierdie tesis. ’n Klassieke Doherty versterke met gelyke
drywings verdeling en ’n ongelyke Doherty versterker wat gebruik maak van ongelyke drywings
verdeling tussen die hoof-en aanvullende versterkers is ook gevalueer en vergelyk met die aanpassings
Doherty versterker.
Die versterkers was ontwerp met ’n 10 W LDMOS FET, die MRF282. Die aanpassings Doherty
versterker en die ongelyke Doherty versterker het aanmerklike verbeteringe in effektiwiteit en
uittree drywing gebring in vergelyking met die ewe Doherty versterker. By POD het die aanpassings
versterker 42.4 dBm teen 39.75 % drywing toegevoegde effektiwiteit (DTE) gelewer, die
ongelyke Doherty versterker 41.9 dBm teen 40.75 % DTE, en die ewe Doherty versterker 40.8
dBm teen 38.6 DTE. By ’n intree drywingsvlak 3 dB laer as POD het die aanpassings Doherty
versterker ’n effektiwiteit van 34.3 % getoon, in vergelyking met die onewe Doherty versterker
se 34.9 % en die ewe Doherty versterker se 29.75 % DTE.
|
570 |
Filtering Techniques for Improving Radio-Frequency Identification Machine ControlJanuary 2012 (has links)
abstract: Human operators have difficulty driving cranes quickly, accurately, and safely because of the slow response of heavy crane structures, non-intuitive control interfaces, and payload oscillations. Recently, a novel hand-motion crane control system has been proposed to improve performance by coupling an intuitive control interface with an element that reduces the complex oscillatory behavior of the payload. Hand-motion control allows operators to drive a crane by simply moving a hand-held radio-frequency tag through the desired path. Real-time location sensors are used to track the movements of the tag and the tag position is used in a feedback control loop to drive the crane. An input shaper is added to eliminate dangerous payload oscillations. However, tag position measurements are corrupted by noise. It is important to understand the noise properties so that appropriate filters can be designed to mitigate the effects of noise and improve tracking accuracy. This work discusses implementing filtering techniques to address the issue of noise in the operating environment. Five different filters are used on experimentally-acquired tag trajectories to reduce noise. The filtered trajectories are then used to drive crane simulations. Filter performance is evaluated with respect to the energy usage of the crane trolley, the settling time of the crane payload oscillations, and the safety corridor of the crane trajectory. The effects of filter window lengths on these parameters are also investigated. An adaptive filtering technique, namely the Kalman filter, adapts to the noise characteristics of the workspace to minimize the tag tracking error and performs better than the other filtering techniques examined. / Dissertation/Thesis / M.S. Bioengineering 2012
|
Page generated in 0.0529 seconds