The major advantages of radio frequency identification (RFID) technology over barcodes are that the RFID-tagged objects do not require to be in line-of-sight with the reader for their identification and multiple objects can be read simultaneously. But when multiple objects are read simultaneously there is always a problem of collision which reduces the efficiency of the system. This thesis presents a comprehensive study of the dynamic framed slotted ALOHA (DFSA)-based anti-collision multi-tag identification algorithms for passive RFID system. Performance of various DFSA algorithms is compared through extensive simulation results. In addition, a number of simple performance improvement techniques have also been investigated in this thesis, including improved estimation techniques for the number of tags in each read cycle and a low-complexity heuristic stopping criterion that can be easily implemented in the practical system.

This thesis describes the reactions and emission spectra of propylene under radio frequency energy radiation.

La supraconductivité par effet de proximité est un phénomène apparaissant à basse températures qui confère des propriétés supraconductrices à un métal normal cohérent de phase connecté à des électrodes supraconductrices. C'est aussi un outil puissant de la physique mésoscopique, car il est sensible aux différents régimes de transport à basse température. En particulier, nous avons utilisé cet effet afin de révéler les propriétés électroniques spéciales de nanofils de Bi monocrystallins. Dans ce système, le transport est dominé par la surface. De plus, la présence de fort couplage spin-orbite dans le Bi à basse dimension influence profondément sa structure de bande : la bicouche de Bi orienté selon la direction (111) a été prédite d'être isolante dans le volume, mais conductrice sur les bords. Cet effet, appelé l'effet Hall quantique de spin donne lieu a deux états chiraux contra-propageants, qui sont insensibles au désordre tant que la symétrie par renversement du temps est préservée.A travers l'observation de la robustesse du courant critique à fort champ magnétique dans plusieurs échantillons, en même temps que des intérférences de type SQUID à bas champ magnétique, nous avons montré l'existence d'états de bord 1D portant le supercourant. La mesure de la relation courant-phase grâce à la technique de SQUID asymétrique sur un nanofil caractérisé auparavant a été réalisée et démontre que ces canaux sont en fait balistiques. Ces résultats sont compatibles avec des simulations de type liaisons fortes, qui étendent les résultats connus pour la bicouche de Bi (111) aux systèmes de type nanofil. L'ajout d'un champ Zeeman dans le plan permet d'observer des transitions 0-π, révélant ainsi des croisements de niveaux induits par la séparation en spin des états d'Andreev. Enfin, des mesures de la susceptibilité dynamique de ce système via des mesures de spectroscopie micro-onde ont été mises en place, et pourraient démontrer de manière univoque la propriété de protection topologique contre le désordre, d'après nos simulations numériques. / The superconducting proximity effect is a phenomenon occurring at low temperatures that conveys superconducting properties to a phase coherent normal metal sample connected to superconducting electrodes. It is also a powerful tool in mesoscopic physics because it is sensitive to different transport regimes at low temperatures. In particular, we have used this effect to reveal the special electronic transport properties of single crystal Bi nanowires. In this system, the transport is dominated by surface states. Moreover, the presence of strong spin-orbit coupling in Bi at low dimensions deeply influences its electronic structure : it was predicted that (111) oriented Bi bilayer are insulating in the bulk, but conducting along the edges. This so called Quantum Spin Hall Effect (QSHE), gives rise to counterpropagating chiral edge states, that are protected against disorder as long as time reversal symmetry is present.Through the observation of the resilience of the critical current in several samples at high magnetic field, along with SQUID-like interference pattern at low magnetic field, we showed the existence of supercurrent carrying 1D edge states. The measurement of the current-phase relation using the asymetric SQUID technique on a previously characterized nanowire was realized and further demonstrates that these edge states are ballistic. These findings are consistent with tight-binding simulations that extend the known results for (111) Bi bilayer to nanowire-like system. The addition of an in-plane Zeeman field allows one to observe 0-π transitions, thereby revealing spin-splitting induced Andreev level crossings. Finally, microwave spectroscopy measurement of the dynamical susceptibility in this system are initiated, that could reliably demonstrate the property of protection against disorder according to numerical simulations.By exploring Bi at low dimensions, this thesis paves the way towards the exploration of electronic states fully protected from disorder.

The project deals with a theoretical design of passive ultra-high frequency radio identification (UHF RFID) tag for the measurement of liquid levels. Liquid level has an influence on the input impedance of an RFID tag antenna. The changes of input impedance have been used to distinguish individual liquid levels. Furthermore, this project presents optimization methods for the highest efficiency of an UHF RFID tag in Matlab and it aims to design a suitable antenna within CST MICROWAVE STUDIO.

The ultimate goal of the modern wireless communication industry is the full integration of digital, analog, and radio frequency (RF) functions. The most successful solution for such demands has been complementary metal oxide semiconductor (CMOS) technology, thanks to its cost-effective material and great versatility. Power amplifier (PA), the biggest bottleneck to integrate in a single-chip transceiver in wireless communications, significantly influences overall system performance. Recent advanced wireless communication systems demand a power amplifier that can simultaneously support different communication standards. A fully integrated single-chip tunable CMOS power amplifier is the best solution in terms of the cost and level of integration with other functional blocks of an RF transceiver. This work, for the first time, proposes a fully integrated band-switchable RF power amplifier by using a novel approach towards switching the matching networks. In this approach, which is called Bit Optimized Reconfigurable Network (BORN), two matching networks which can be controlled by digital bits will provide three operating frequency bands for the power amplifier. In order to implementing the proposed BORN PA, a robust high-power RF switch is presented by using resistive body floating technique and 6-terminal triple-well NMOS. The proposed BORN PA delivers measured saturated output power (Psat) of 21.25/22.25/ 23.0dBm at 960MHz/1317MHz/1750MHz, respectively. Moreover, the proposed BORN PA provides respective 3-dB bandwidth of 400MHz/425MHz/550MHz, output 1-dB compression point (P1dB) of 19.5dBm/20.0dBm/21.0dBm, and power-added efficiency (PAE) of 9/11/13% at three targeted frequency bands, respectively. The promising results show that the proposed BORN PA can be a practical solution for RF multiband applications in terms of the cost and level of integration with other functional blocks of an RF transceiver.

This thesis describes the basic principles of radio frequency identification, basic characteristics of patch antennas, the possibility of their feeding and design of planar antenna series. Are discussed, impedance matching options. The selected antenna arrays were realised, measuring their parameters was down and measured parameters was compared with simulation results.

No description available.

L'objectif du projet ITER est de démontrer la faisabilité scientifique et technique de la fusion nucléaire à des fins énergétiques. Pour obtenir les réactions de fusion, un plasma chauffé à 150 millions de degrés doit être confiné par un champ magnétique de plusieurs teslas en quasi-continu. Pour obtenir ces températures, des antennes radiofréquences (RF) injectent des ondes électromagnétiques de forte puissance dans le plasma, en particulier entre 40 et 55 MHz aux fréquences de résonance cyclotron des ions. L'assemblage et la dilatation thermique en fonctionnement de ces antennes sont rendus possibles par des contacts électriques glissants. Ces contacts doivent supporter un courant RF crête de 2.25 kA en régime stationnaire, dans un environnement sous vide et pendant toute la durée de fonctionnement de l'antenne. De plus, les matériaux de ces contacts doivent être compatibles avec la température de 250°C utilisée pour l'étuvage de la machine pendant plusieurs milliers d'heures cumulées. Ces contacts RF sont donc des composants critiques pour les performances de l'antenne. Aucun contact électrique du commerce n'a jusqu'à présent été qualifié pour ces spécifications et un effort particulier a donc été porté dans le cadre de ce travail de thèse afin de développer une solution satisfaisante. Le choix des matériaux et des revêtements utilisés pour ces contacts a fait l'objet de la première partie de cette étude. Pour ce faire, un modèle multi-physique tenant compte des paramètres RF, mécaniques et thermiques a été développé. À la suite de cette étude, des premiers couples de matériaux et de revêtements ont été sélectionnés. Les propriétés d'échantillons représentatifs ont été caractérisées par des mesures réalisées au laboratoire CIRIMAT avant et après un vieillissement thermique simulé. Afin d'évaluer le comportement électrique et tribologique de ces paires de matériaux dans les conditions de fonctionnement d'ITER, un tribomètre sous vide a été spécifiquement conçu et utilisé pendant ce travail de thèse.[...] / Ion Cyclotron Resonance Heating (ICRH) is one of the most important plasma heating methods in magnetically confined fusion experiments. In ITER, two ICRH antennas are designed to supply 20 MW of Radio-Frequency (RF) power at 40-55 MHz to heat the plasma. RF sliding contacts are used in the antennas to allow their remote handling assembly and to improve their maintainability, as well as to absorb the thermal expansion of the RF conductors during operations. One of the RF contacts is designed to be operated at 2.25 kA in steady-state (1200 s), with a current density of 4.8 kA/m. With such current levels, high heating occurs at the contact area which threatens the structural and material safety of the RF contacts and constrain their life time. In addition, before operation of the ITER ICRH antennas, all the in-vessel structures will be baked at 250°C during thousands of cumulated hours for outgassing. In CEA, R&D work on RF contact development has been carried out for 10 years. Recently, Ag-coated CuCrZr louvers RF contact prototype based on Multi-Contact LA-CUT commercial contact configuration was tested on TITAN test-bed. 1500 A, 1200 s steady-state operation was achieved. However, due to burn failure, the RF contact prototype couldn't reach 1200 s steady-state under 2 kA as expected. In order to improve the performances of the RF sliding contacts to match ITER requirements, failure mechanisms of RF contacts during RF operations were analyzed and possible materials or coated systems that can be used for RF sliding contacts compatible with the ITER environment have been studied in detail within this thesis work. The effects of material selection, cooling parameter and contact resistance on louvers temperature have been modelled and simulated through finite element methods. Moreover, functional coatings like Ag, Au, Rh and their alloys were manufactured by electroplating on 316L and CuCrZr, which are commonly used as base materials on tokamak. By mimicking the ITER baking conditions, the coated samples were thermal aged under vacuum at 250ºC for 500 h, after which the materials properties evolution such as hardness, grain size and adherence was characterized. In addition, the coating life time has been evaluated through cross-sectional diffusion characterizations.[...]

Electrical activity at volcanoes has been recently recognized as a potential new remote sensing technique for plume-forming eruptions. Volcanic electrical activity takes place in the conduit and plume and therefore has the benefit of being a direct indicator of surface activity. This is unlike seismic signals, which indicate magma/gas movement underground, and infrasound signals, which indicate a surface explosion but not necessarily the formation of an ash plume. There are two distinct types of volcanic electrical discharges: volcanic lightning and continual radio frequency (CRF) impulses. This dissertation explores the relationships between these two electrical signals and other commonly monitored volcanic parameters. For volcanic electrical activity to be widely adopted into monitoring platforms it is important to understand how electrical discharges at volcanoes are related to other monitored signals. I present a case study of the electrical activity at Sakurajima Volcano, Japan. The lightning mapping array (LMA) is used to record both lightning and CRF. I relate CRF to ash properties and show that CRF corresponds to eruptions containing more juvenile magma that has undergone milling as it is transported out of the conduit. Seismic, infrasound, and video data are used in conjunction with multivariable statistical methods on a suite of electrical parameters to show that high levels of volcanic electrical activity are related to eruptions with large infrasound signals (> 107 J), high initial velocities (> 55 m/s), and relatively tall plume heights (> 1 km). Finally, an examination of globally detected lightning at Bogoslof Volcano, AK shows the potential for volcanic lightning in plume tracking (0-100 km), even after the end of the explosive phase of the eruption.

The design of the RF over fiber signal transport system for the ALPACA receiver is described, with particular attention to the strict noise requirements as well as dynamic range considerations. Also discussed are analytical tools for analyzing dynamic range in the context of RFI-rich radio astronomy observational settings, including formulas for maximum interference to noise ratios and a simulation framework for predicting distortion levels. Phase and gain stability measurements of the signal transport system are presented, including the effects of the multi-strand armored fiber optic cable. The resulting system meets design requirements, with equivalent noise temperature below 900 K in 90° F ambient air, resulting in less than 1 K contribution to the system noise temperature. Typical gain is 31-37 dB, and gain differences between channels are stable within 0.25 dB in 90° F conditions. Phase drift between channels due to electronics remains below 1° at room temperature, and below 1.3° in a warm environment. The fiber optic cable is predicted to cause phase changes between channels of no more than 1.3° per °C. Typical spurious free dynamic range is 99 dB·Hz^(⅔), and distortion levels for normal RFI conditions at Arecibo are expected to be 28 dB below the system noise floor.