No description available.

This thesis describes the reactions and emission spectra of propylene under radio frequency energy radiation.

The Internet of Things (IoT) is an infrastructure of physical objects connected via the Internet that can exchange data to achieve efficient resource management. Billions of devices must be self-powered and low-cost considering the massive scale of the IoT. Thus, there is a need for low-cost ambient energy harvesters to power IoT devices. It is a challenging task since ambient energy might be unpredictable, intermittent and insufficient. For example, solar energy has limitations such as intermittence and unpredictability despite utilizing the highest power availability and relatively mature technology. Designing a multi-source energy harvester (MSEH) based on continuous and ubiquitous ambient energy sources might alleviate these issues by providing versatility and robustness of power supply. However, combining several energy harvesters into one module must be done synergistically to ensure miniaturization, compactness and more collected energy. Also, additive manufacturing techniques must be used to achieve low-cost harvesters and mass manufacturability. This dissertation presents two different kind of ambient energy harvesters, namely radio frequency energy harvester (RFEH) and thermal energy harvester (TEH). Each harvester is individually optimized and then synergistically combined into a MSEH. First, RFEH is designed for triple-band harvesting (GSM900, GSM1800, 3G2100) using the antenna-on-package concept and fabricated through 3D and screen printing. TEH collects energy from temperature fluctuations of ambient environment through a combination of thermoelectric generators and phase change materials. It is adapted specifically for the desert conditions of Saudi Arabia. Later, TEH and RFEH are combined to realize MSEH. Smart integration is achieved by designing a dual-function component, heatsink antenna, that serves as a receiving antenna of RFEH and a heatsink of TEH. The heatsink antenna has been optimized for both antenna radiation performance and heat transfer performance. Field tests showed that the MSEH can collect 3680μWh energy per day and the outputs of TEH and RFEH have increased 4 and 3 times compared to the independent TEH and RFEH respectively. To validate the utility of the MSEH, a temperature/humidity sensor has been successfully powered by the MSEH. Overall, sensor’s data can be wirelessly transmitted with time intervals of 3.5s, highlighting the effectiveness of the synergistic MSEH.

For radio frequency energy transmission, the conversion efficiency of the receiver is decisive not only for reducing sending power, but also for enabling energy transmission over long and variable distances. In this contribution, we present a passive RF-DC converter for energy harvesting at ultra-low input power at 868 MHz. The novel converter consists of a reactive matching circuit and a combined voltage multiplier and rectifier. The stored energy in the input inductor and capacitance, during the negative wave, is conveyed to the output capacitance during the positive one. Although Dickson and Villard topologies have principally comparable efficiency for multi-stage voltage multipliers, the Dickson topology reaches a better efficiency within the novel ultra-low input power converter concept. At the output stage, a low-pass filter is introduced to reduce ripple at high frequencies in order to realize a stable DC signal. The proposed rectifier enables harvesting energy at even a low input power from −40 dBm for a resistive load of 50 kΩ. It realizes a significant improvement in comparison with state of the art solutions

For radio frequency energy transmission, the conversion efficiency of the receiver is decisive not only for reducing sending power, but also for enabling energy transmission over long and variable distances. In this contribution, we present a passive RF-DC converter for energy harvesting at ultra-low input power at 868 MHz. The novel converter consists of a reactive matching circuit and a combined voltage multiplier and rectifier. The stored energy in the input inductor and capacitance, during the negative wave, is conveyed to the output capacitance during the positive one. Although Dickson and Villard topologies have principally comparable efficiency for multi-stage voltage multipliers, the Dickson topology reaches a better efficiency within the novel ultra-low input power converter concept. At the output stage, a low-pass filter is introduced to reduce ripple at high frequencies in order to realize a stable DC signal. The proposed rectifier enables harvesting energy at even a low input power from −40 dBm for a resistive load of 50 kΩ. It realizes a significant improvement in comparison with state of the art solutions

Radio Frequency (RF) energy transfer is getting increasingly importance in new generations of wireless sensor networks and this trend is tremendously supported by the modern trends to Internet of things (IoT). This promising technology enables proactive energy replenishment for wireless devices. With RF energy, transmission long distances between the energy source and the receiver can be overbridged. The main challenge thereby is the power conversion efficiency from a low level RF input power to a Direct Current (DC) voltage which is able to supply the mobile system. For this purpose, a novel approach for RF DC conversion is proposed. It consists of a modified voltage multiplier RF DC converter circuit by incorporating an inductor at the input of the circuit, which generates an induced voltage able to boost the output circuit and improve the conversion efficiency. Analytical analysis of the novel approach has been carried out to determine the optimal value of the inductor to maximize the output power. The experimental investigations show that the proposed solution is able to improve significantly both the output voltage and the power conversion efficiency, compared to the state of the art, and this especially at low input power ranges, which are often the case. At -10 dBm input power, the modified voltage multiplier RF DC converter circuit can reach 1.71 V output voltage and 49.21 % power conversion efficiency for, respectively, 500 kΩ and 10 kΩ resistive loads. In order to validate the new proposal for the RF transfer system experimentally, microstrip meander line antennas and microstrip patch antenna arrays are designed for different ISM bands, where relevant requirements for RF energy transfer are respected. For each antenna a modified voltage multiplier RF DC converter circuit has been applied and the system is tuned to the corresponding resonant frequency to avoid mismatching. In this investigation several scenarios have been addressed, such as RF transmission energy, RF energy harvesting in Global System for Mobile (GSM) bands and Wireless Local Area Networks (WLAN) band are developed. Field test results show high performances of experimental results in comparison to the state of the art.:1 Introduction 2 Theoretical Background 3 State of the Art of RF Energy Transfer 4 Novel Approach for a RF DC Converter Circuit 5 Antennas Design 6 Experimental Verification at Specific Scenarios 7 Conclusion / Die RF-Energieübertragung (RF) gewinnt in neuen Generationen von drahtlosen Sensornetzen zunehmend an Bedeutung. Dieser Trend wird durch das Internet der Dinge (IoT) weiter unterstützt. Diese vielversprechende Technologie ermöglicht eine proaktive Energieversorgung für drahtlose Geräte. Mit RF-Energie können große Entfernungen zwischen der Energiequelle und dem Empfänger überbrückt werden. Die größte Herausforderung dabei ist der Wirkungsgrad, mit dem von einer niedrigen HF-Eingangsleistung in eine Gleichspannung (DC), mit welcher das mobile System versorgt wird, gewandelt wird. Zu diesem Zweck wird ein neuer Ansatz für einen RF-DC-Wandler vorgeschlagen. Er besteht aus einer modifizierten Spannungsvervielfacher-RF-DC-Wandlerschaltung, die eine Spule am Eingang der Schaltung integriert. Diese erzeugt eine induzierte Spannung, die in der Lage ist die Ausgangsschaltung zu verstärken und den Umwandlungswirkungsgrad zu verbessern. Analytische Untersuchungen zu diesem neuartigen Ansatz wurden durchgeführt, um den optimalen Wert der Spule zu bestimmen und die Ausgangsleistung zu maximieren. Die experimentellen Untersuchungen zeigen, dass die vorgeschlagene Lösung in der Lage ist, sowohl die Ausgangsspannung als auch den Wirkungsgrad der Leistungsumwandlung im Vergleich zum Stand der Technik deutlich zu verbessern. Dies gilt besonders für niedrige Eingangsleistungsbereiche, welche häufig vorkommen. Bei -10 dBm Eingangsleistung kann die modifizierte Spannungsvervielfacher-RF-DC-Wandlerschaltung 1.71 V Ausgangsspannung und 49.21 % Leistungswandlungswirkungsgrad für jeweils 500 kΩ und 10 kΩ ohmsche Last erreichen. Um das neue RF-Übertragungssystem experimentell zu validieren, werden Mikrostreifenmäanderlinienantennen und Mikrostreifen-Patch-Antennenarrays für verschiedene ISM-Bänder ausgelegt, wobei die relevanten Anforderungen an die RF-Energieübertragung eingehalten werden. Für jede Antenne wurde eine modifizierte Spannungsvervielfacher-HF-DC-Wandlerschaltung verwendet und das System auf die entsprechende Resonanzfrequenz abgestimmt, um Fehlanpassungen zu vermeiden. Dabei wurden mehrere Szenarien untersucht, wie z.B. RF-Energieübertragung, RF-Energiegewinnung aus GSM-Bändern und WLAN-Netzwerken. Die Feldtests zeigen eine hohe Leistungsfähigkeit der experimentellen Ergebnisse im Vergleich zum Stand der Technik.:1 Introduction 2 Theoretical Background 3 State of the Art of RF Energy Transfer 4 Novel Approach for a RF DC Converter Circuit 5 Antennas Design 6 Experimental Verification at Specific Scenarios 7 Conclusion

This thesis primarily deals with the concept of designing an antenna based device to harvest energy from Radio Frequency (RF) and using the harvested energy to sense the available Long Term Evolution (LTE) network in order for the Internet of Things (IoT) devices to connect to the network for the purpose of transmitting and receiving data. Secondarily the importance of this project is targeting how to conserve battery power in an IoT device and extend it’s lifetime. Research in the field of energy harvesting has been going on for a long time. Most of the researches concentrate on harvesting significant amount of energy to power up an entire device and so no one has ever thought of using the harvested RF energy to sense the availability of LTE network. This method of using antenna to sense network requires only a small amount of harvested energy. Due to this reason the proposed design works for a very low input received signal strength indicator (RSSI) as well, unlike higer RSSI required for other applications. The proposed design has three major sub-parts such as the (i) Antenna for the purpose of receiving the available ambient radio frequency. (ii) Matching circuit for the purpose of maximum power transfer between the antenna and the rectifier circuit. Finally (iii) rectifier which is used to convert the AC voltage into DC voltage. The device then measures the obtained voltage through the Analog to Digital Converter (ADC) pin in the Micro-Controlling Unit (MCU) available with the attached IoT device. The MCU then maps the harvested voltage into the corresponding analog voltage.Depending on the set threshold voltage the MCU can then advice whether or not to connect to the LTE network. The design implements matching circuit for the two LTE bands that are primarily in use in the European region i.e., band 3, 8 that work in 915, 1800 MHz frequency region respectively. In this way we can identify in which band the device is harvesting energy. The matching circuit also acts as a bandpass filter. For the design and production of the entire harvester device one needs adequate knowledge in the field of RF and Antennas and a high level knowledge in the field of electronics in order to run Simulations and to design Printed Circuit Boards (PCBs). Advanced Design Software (ADS) has been used to run all the simulations and Altium software for the design of PCBs. The final prototype is presented along with the casing and tested on the field in practical scenario. Antenna test chambers were used to test the performance of the antennas being used for the design. The prototype harvests RF energy and indicates whether or not to connect to the LTE network with the help of light emitting diode (LED). The uniqueness of the device is that it can detect signals as low as -110 dBm, this has been set as the threshold for the purpose of sensing LTE networks. / Denna avhandling behandlar primärt konceptet att använda antenner för att hämta energi från RF och att använda den insamlade energin för att känna av det tillgängliga LTE-nätverket för att IoT-enheterna ska kunna ansluta till nätverket för syftet med att överföra och ta emot data. Sekundärt Målet med av detta projekt är att spara batteri i en IoT-enhet och förlänga dess livslängd. Forskning inom området energiskörd har pågått under lång tid nu. De flesta av undersökningarna koncentrerar sig på att skörda betydande mängder energi för att driva en hel enhet och så ingen har någonsin tänkt på att använda den avkända RF-energin för att känna av tillgängligheten för LTE-nätverket. Denna metod för att använda antenn för att känna av nätverk kräver endast en liten mängd skördad energi. På grund av denna anledning fungerar den föreslagna designen även för en mycket låg ingång RSSI, till skillnad från högre RSSI som krävs för andra applikationer. Den föreslagna designen har tre huvuddelar, såsom (i) antennen för att ta emot den tillgängliga omgivande radiofrekvensen. (ii) Matchningskrets för maximal effektöverföring mellan antennen och likriktarkretsen. Slutligen (iii) likriktaren som används för att omvandla AC-spänningen till DC-spänning. Enheten mäter sedan den erhållna spänningen genom ADC-stiftet i MCU som finns tillgänglig med den anslutna IoT-enheten. MCU mappar sedan den genererade spänningen till motsvarande analoga spänning. Beroende på den inställda tröskelspänningen kan MCU sedan ge råd om att ansluta till LTE-nätverket eller inte. Konstruktionen implementerar matchningskrets för de två LTE-banden som primärt används i den europeiska regionen vilka är band 3, 7 som arbetar i 915 respektive 1800 MHz frekvensområdet. På så sätt kan vi identifiera i vilket band enheten hämtar energi i. Matchningskretsen fungerar också som ett bandpassfilter. För design och produktion av hela insamlingsenheten behöver man adekvat kunskap inom området RF och antenner och en hög nivå kunskap inom elektronikområdet för att kunna köra simuleringar och designa PCBs.ADS har använts för att köra alla simuleringar och Altium-mjukvara för design av PCBs. Den slutliga prototypen presenteras tillsammans med höljet och testas på fältet i praktiskt scenario. Antenntestkammare användes för att testa prestandan hos antennerna som användes för konstruktionen. Prototypen skördar RF-energi och indikerar om man ska ansluta till LTE-nätverket eller inte med hjälp av blinkande LED.Det unika med enheten är att den kan upptäcka signaler så låga som - 110 dBm, detta har satts som tröskel för avkänning LTE nätverk.