Tato práce popisuje výzkum zaměřený na studium vertikálních teplotních profilů a fluktuací v turbulentní Rayleighově-Bénardově konvekci. Experiment byl proveden v "Barrel of Ilmenau" obsahující válcovou experimentální celu s průměrem 7,15 m a výškou 4,7 m ("the aspect ratio" = 1,5) naplněnou suchým vzduchem. Teplotní profily a fluktuace byly studovány podél vertikální osy cely mezi horní a spodní deskou spodní deskou v rozmezí Rayleighova čísla (Ra) 1E11 4E12. Teplotní profily byly změřeny novou metodou využívající systém s optickým vláknem Luna ODiSI-B, který byl pořízen týmem z Ilmenau. Systém umožňuje měřit teplotní profil ve všech bodech podél celého vlákna současně s prostorovým rozlišením 5 mm.

Byla provedena měření turbulentní Rayleighovy-Bénardovy konvekce v kryogenním heliu v rozsahu Rayleighových čísel 1e8

We examine the Rayleigh–Bénard convection as modelled by the Boussinesq equation. Our aim is at deriving bounds for the heat enhancement factor in the vertical direction, the Nusselt number, which reproduce physical scalings. In the first part of the dissertation, we examine the the simpler model when the acceleration of the fluid is neglected (Pr=∞) and prove the non-optimality of the temperature background field method by showing a lower bound for the Nusselt number associated to it. In the second part we consider the full model (Pr<∞) and we prove a new upper bound which improve the existing ones (for large Pr numbers) and catches a transition at Pr~Ra^(1/3).

The thesis is focused on the investigation of Rayleigh-Bénard problem in an extended setting approximating the conditions in the Earth's mantle. The aim is to evaluate the influence of depth- and temperature- dependent material parameters, dissipation, adiabatic heating/cooling and heat sources on the qualitative characteristics of thermal convection. We identify the critical values of dimensionless parameters that determine the onset of convection and characterize the dominating convection patterns in marginally supercritical states. These issues are addressed by the application of linear stability analysis and weakly non-linear analysis. It has been found that the character of convection differ substantially from the standard case of Rayleigh-Bénard convection. Powered by TCPDF (www.tcpdf.org)

V disertační práci je popsán heliový kryostat s experimentální válcovou konvekční celou pro studium proudění při přirozené konvekci za velmi vysokých Rayleigho čísel Ra (až do řádu 10^15) a Nusseltových čísel Nu (až do řádu 10^4). Pracovní látkou je studené 4He, které umožňuje díky výhodným fyzikálním vlastnostem dosažení velmi vysokých hodnot čísel Ra. Návrh kryostatu je založen na koncepci lázňových NMR kryostatů s nízkým odparem kryokapalin. Ve středu kryostatu je umístěna konvekční cela o průměru 300 mm a výšce 300 mm. Celu tvoří horní a spodní dno a výměnná střední část. Tyto díly jsou spojeny rozebíratelnými přírubami těsněnými indiovým drátem. Výměnná část umožňuje snadnou modifikaci geometrie cely. Hlavní přednost kryostatu spočívá v minimálním vlivu konstrukce cely a použitých materiálů na studovanou konvekci. Cela kryostatu je navržena pro pracovní tlaky do 250 kPa.

No description available.

In this thesis, we consider two models from physics, which are characterized by the interplay of thermodynamical and fluid mechanical phenomena: demixing (spinodal decomposition) and Rayleigh--Bénard convection. In both models, we investigate the dependencies of certain intrinsic quantities on the system parameters. The first model describes a thermodynamically driven demixing process of a binary viscous fluid. During the evolution, the two components of the mixture separate into two domains of the different equilibrium volume fractions. One observes a clear tendency: Larger domains grow at the expense of smaller ones, and thus, the average domain sizes increases --- a phenomenon called coarsening. It turns out that two mechanisms are relevant for the coarsening process. At an early stage of the evolution, material transport is essentially mediated by diffusion; at a later stage, when the typical domain size exceeds a certain value, due to the viscosity of the mixture, a fluid flow sets in and becomes the relevant transport mechanism. In both regimes, the growth rates of the typical domain size obey certain power laws. In this thesis, we rigorously establish one-sided bounds on these growth rates via a priori estimates. The second model, Rayleigh--Bénard convection, describes the behavior of a fluid between two rigid horizontal plates that is heated from below and cooled from above. There are two competing heat transfer mechanisms in the system: On the one hand, thermodynamics favors a state in which temperature variations are locally minimized. Thus, in our model, the thermodynamical equilibrium state is realized by a temperature with a linearly decreasing profile, corresponding to pure conduction. On the other hand, due to differences in the densities of hot and cold fluid parcels, buoyancy forces act on the fluid. This results in an upward motion of hot parcels and a downward motion of cold parcels. We study the dependence of the average upward heat flux, measured in the so-called Nusselt number, on the temperature forcing encoded by the container height. It turns out that the efficiency of the heat transport is independent of the height of the container, and thus, the Nusselt number is a constant function of height. Using a priori estimates, we prove an upper bound on the Nusselt number that displays this dependency --- up to logarithmic errors. Further investigations on the flow pattern in Rayleigh--Bénard convection show a clear separation of length scales: Along the horizontal top and bottom plates one observes thin boundary layers in which heat is essentially conducted, whereas the large bulk is characterized by a convective heat flow. We give first rigorous results in favor of linear temperature profiles in the boundary layers, which indicate that heat is indeed essentially conducted close to the boundaries.:1 Introduction 2 Coarsening rates in binary viscous fluids 2.1 Background from physics 2.2 Background from mathematics 2.3 The model 2.4 The gradient flow structure 2.5 Heuristics 2.6 Numerical simulations 2.7 Main results 2.8 Preliminaries 2.9 Proof of upper bounds on coarsening rates 2.10 Appendix: Well-posedness and regularity of solutions 3 Scaling of the Nusselt number 3.1 Background from physics 3.2 The model and the Nusselt number 3.3 Heuristics 3.4 Main results 3.5 Scaling law in the linear regime 3.6 Preliminaries and review 3.7 Upper bound using the background field method 3.8 Upper bound using the maximum principle 3.9 Appendix: Some elementary estimates 4 The laminar boundary layer 4.1 Background, model, and motivation 4.2 Main results 4.3 Preparation: Bounds on the velocity field 4.4 On the energy distribution 4.5 Bounds on the second order derivatives of the temperature field 4.6 Bounds on the third order derivatives of the temperature field

The introduced mineral deposit model (MDM) is the product of a trans-disciplinary study, based on Complexity and General Systems Theory. Both investigate the abstract organization of phenomena, independent of their substance, type, or spatial or temporal scale of existence. The focus of the research has been on giant, hydrothermal mineral deposits. They constitute <0.001% of the total number of deposits yet contain 70-85% of the world's metal resources. Giants are the definitive exploration targets. They are more profitable to exploit and less susceptible to fluctuations of the market. Consensus has it that the same processes that generate small deposits also form giants but those processes are simply longer, vaster, and larger. Heat is the dominant factor in the genesis of giant mineral deposits. A paleothermal map shows where the vast heat required to generate a giant has been concentrated in a large space, and even allows us to deduce the duration of the process. To generate a paleothermal map acceptable to the scientific community requires reproducibility. Experimentation with various approaches to pattern recognition of geochemical data showed that the AUTOCLUST algorithm not only gave reproducibility but also gave the most consistent, most meaningful results. It automatically extracts boundaries based on Voronoi and Delaunay tessellations. The user does not specify parameters; however, the modeller does have tools to explore the data. This approach is near ideal in that it removes much of the human-generated bias. This algorithm reveals the radial, spatial distribution, of gold deposits in the Lachlan Fold Belt of southeastern Australia at two distinct scales – repeating patterns every ~80 km and ~230 km. Both scales of patterning are reflected in the geology. The ~80 km patterns are nested within the ~230 km patterns revealing a self-similar, geometrical relationship. It is proposed that these patterns originate from Rayleigh-Bénard convection in the mantle. At the Rayleigh Number appropriate for the mantle, the stable planform is the spoke pattern, where hot mantle material is moving upward near the centre of the pattern and outward along the radial arms. Discontinuities in the mantle, Rayleigh-Bénard convection in the mantle, and the spatial distribution of giant mineral deposits, are correlative. The discontinuities in the Earth are acting as platforms from which Rayleigh-Bénard convection can originate. Shallow discontinuities give rise to plumelets, which manifest at the crust as repeating patterns ranging, from ~100 to ~1,000 km in diameter. Deeper discontinuities give rise to plumes, which become apparent at the crust as repeating patterns ranging from >1,000 to ~4,000 km in diameter. The deepest discontinuities give rise to the superplumes, which become detectable at the crust as repeating patterns ranging from >4,000 to >10,000 km in diameter. Rayleigh-Bénard convection concentrates the reservoir of heat in the mantle into specific locations in the crust; thereby providing the vast heat requirements for the processes that generate giant, hydrothermal mineral deposits. The radial spatial distribution patterns observed for gold deposits are also present for base metal deposits. At the supergiant Broken Hill deposit in far western New South Wales, Australia, the higher temperature Broken Hill-type deposits occur in a radial pattern while the lower temperature deposits occur in concentric patterns. The supergiant Broken Hill deposit occurs at the very centre of the pattern. If the supergiant Broken Hill Deposit was buried beneath alluvium, water or younger rocks, it would now be possible to predict its location with accuracy measured in tens of square kilometres. This predictive accuracy is desired by every exploration manager of every exploration company. The giant deposits at Broken Hill, Olympic Dam, and Mount Isa all occur on the edge of an annulus. There are at least two ways of creating an annulus on the Earth's surface. One is through Rayleigh-Bénard convection and the other is through meteor impact. It is likely that only 'large' meteors (those >10 km in diameter) would have any permanent impact on the mantle. Lesser meteors would leave only a superficial scar that would be eroded away. The permanent scars in the mantle act as ‘accidental templates’ consisting of concentric and possibly radial fractures that impose those structures on any rocks that were subsequently laid down or emplaced over the mantle. In southeastern Australia, the proposed Deniliquin Impact structure has been an 'accidental template' providing a 'line-of-least-resistance' for the ascent of the ~2,000 km diameter, offshore, Cape Howe Plume. The western and northwestern radial arms of this plume have created the very geometry of the Lachlan Fold Belt, as well as giving rise to the spatial distribution of the granitic rocks in that belt and ultimately to the gold deposits. The interplay between the templating of the mantle by meteor impacts and the ascent of plumelets, plumes or superplumes from various discontinuities in the mantle is quite possibly the reason that mineral deposits occur where they do.

The introduced mineral deposit model (MDM) is the product of a trans-disciplinary study, based on Complexity and General Systems Theory. Both investigate the abstract organization of phenomena, independent of their substance, type, or spatial or temporal scale of existence. The focus of the research has been on giant, hydrothermal mineral deposits. They constitute <0.001% of the total number of deposits yet contain 70-85% of the world's metal resources. Giants are the definitive exploration targets. They are more profitable to exploit and less susceptible to fluctuations of the market. Consensus has it that the same processes that generate small deposits also form giants but those processes are simply longer, vaster, and larger. Heat is the dominant factor in the genesis of giant mineral deposits. A paleothermal map shows where the vast heat required to generate a giant has been concentrated in a large space, and even allows us to deduce the duration of the process. To generate a paleothermal map acceptable to the scientific community requires reproducibility. Experimentation with various approaches to pattern recognition of geochemical data showed that the AUTOCLUST algorithm not only gave reproducibility but also gave the most consistent, most meaningful results. It automatically extracts boundaries based on Voronoi and Delaunay tessellations. The user does not specify parameters; however, the modeller does have tools to explore the data. This approach is near ideal in that it removes much of the human-generated bias. This algorithm reveals the radial, spatial distribution, of gold deposits in the Lachlan Fold Belt of southeastern Australia at two distinct scales – repeating patterns every ~80 km and ~230 km. Both scales of patterning are reflected in the geology. The ~80 km patterns are nested within the ~230 km patterns revealing a self-similar, geometrical relationship. It is proposed that these patterns originate from Rayleigh-Bénard convection in the mantle. At the Rayleigh Number appropriate for the mantle, the stable planform is the spoke pattern, where hot mantle material is moving upward near the centre of the pattern and outward along the radial arms. Discontinuities in the mantle, Rayleigh-Bénard convection in the mantle, and the spatial distribution of giant mineral deposits, are correlative. The discontinuities in the Earth are acting as platforms from which Rayleigh-Bénard convection can originate. Shallow discontinuities give rise to plumelets, which manifest at the crust as repeating patterns ranging, from ~100 to ~1,000 km in diameter. Deeper discontinuities give rise to plumes, which become apparent at the crust as repeating patterns ranging from >1,000 to ~4,000 km in diameter. The deepest discontinuities give rise to the superplumes, which become detectable at the crust as repeating patterns ranging from >4,000 to >10,000 km in diameter. Rayleigh-Bénard convection concentrates the reservoir of heat in the mantle into specific locations in the crust; thereby providing the vast heat requirements for the processes that generate giant, hydrothermal mineral deposits. The radial spatial distribution patterns observed for gold deposits are also present for base metal deposits. At the supergiant Broken Hill deposit in far western New South Wales, Australia, the higher temperature Broken Hill-type deposits occur in a radial pattern while the lower temperature deposits occur in concentric patterns. The supergiant Broken Hill deposit occurs at the very centre of the pattern. If the supergiant Broken Hill Deposit was buried beneath alluvium, water or younger rocks, it would now be possible to predict its location with accuracy measured in tens of square kilometres. This predictive accuracy is desired by every exploration manager of every exploration company. The giant deposits at Broken Hill, Olympic Dam, and Mount Isa all occur on the edge of an annulus. There are at least two ways of creating an annulus on the Earth's surface. One is through Rayleigh-Bénard convection and the other is through meteor impact. It is likely that only 'large' meteors (those >10 km in diameter) would have any permanent impact on the mantle. Lesser meteors would leave only a superficial scar that would be eroded away. The permanent scars in the mantle act as ‘accidental templates’ consisting of concentric and possibly radial fractures that impose those structures on any rocks that were subsequently laid down or emplaced over the mantle. In southeastern Australia, the proposed Deniliquin Impact structure has been an 'accidental template' providing a 'line-of-least-resistance' for the ascent of the ~2,000 km diameter, offshore, Cape Howe Plume. The western and northwestern radial arms of this plume have created the very geometry of the Lachlan Fold Belt, as well as giving rise to the spatial distribution of the granitic rocks in that belt and ultimately to the gold deposits. The interplay between the templating of the mantle by meteor impacts and the ascent of plumelets, plumes or superplumes from various discontinuities in the mantle is quite possibly the reason that mineral deposits occur where they do.

The introduced mineral deposit model (MDM) is the product of a trans-disciplinary study, based on Complexity and General Systems Theory. Both investigate the abstract organization of phenomena, independent of their substance, type, or spatial or temporal scale of existence. The focus of the research has been on giant, hydrothermal mineral deposits. They constitute <0.001% of the total number of deposits yet contain 70-85% of the world's metal resources. Giants are the definitive exploration targets. They are more profitable to exploit and less susceptible to fluctuations of the market. Consensus has it that the same processes that generate small deposits also form giants but those processes are simply longer, vaster, and larger. Heat is the dominant factor in the genesis of giant mineral deposits. A paleothermal map shows where the vast heat required to generate a giant has been concentrated in a large space, and even allows us to deduce the duration of the process. To generate a paleothermal map acceptable to the scientific community requires reproducibility. Experimentation with various approaches to pattern recognition of geochemical data showed that the AUTOCLUST algorithm not only gave reproducibility but also gave the most consistent, most meaningful results. It automatically extracts boundaries based on Voronoi and Delaunay tessellations. The user does not specify parameters; however, the modeller does have tools to explore the data. This approach is near ideal in that it removes much of the human-generated bias. This algorithm reveals the radial, spatial distribution, of gold deposits in the Lachlan Fold Belt of southeastern Australia at two distinct scales – repeating patterns every ~80 km and ~230 km. Both scales of patterning are reflected in the geology. The ~80 km patterns are nested within the ~230 km patterns revealing a self-similar, geometrical relationship. It is proposed that these patterns originate from Rayleigh-Bénard convection in the mantle. At the Rayleigh Number appropriate for the mantle, the stable planform is the spoke pattern, where hot mantle material is moving upward near the centre of the pattern and outward along the radial arms. Discontinuities in the mantle, Rayleigh-Bénard convection in the mantle, and the spatial distribution of giant mineral deposits, are correlative. The discontinuities in the Earth are acting as platforms from which Rayleigh-Bénard convection can originate. Shallow discontinuities give rise to plumelets, which manifest at the crust as repeating patterns ranging, from ~100 to ~1,000 km in diameter. Deeper discontinuities give rise to plumes, which become apparent at the crust as repeating patterns ranging from >1,000 to ~4,000 km in diameter. The deepest discontinuities give rise to the superplumes, which become detectable at the crust as repeating patterns ranging from >4,000 to >10,000 km in diameter. Rayleigh-Bénard convection concentrates the reservoir of heat in the mantle into specific locations in the crust; thereby providing the vast heat requirements for the processes that generate giant, hydrothermal mineral deposits. The radial spatial distribution patterns observed for gold deposits are also present for base metal deposits. At the supergiant Broken Hill deposit in far western New South Wales, Australia, the higher temperature Broken Hill-type deposits occur in a radial pattern while the lower temperature deposits occur in concentric patterns. The supergiant Broken Hill deposit occurs at the very centre of the pattern. If the supergiant Broken Hill Deposit was buried beneath alluvium, water or younger rocks, it would now be possible to predict its location with accuracy measured in tens of square kilometres. This predictive accuracy is desired by every exploration manager of every exploration company. The giant deposits at Broken Hill, Olympic Dam, and Mount Isa all occur on the edge of an annulus. There are at least two ways of creating an annulus on the Earth's surface. One is through Rayleigh-Bénard convection and the other is through meteor impact. It is likely that only 'large' meteors (those >10 km in diameter) would have any permanent impact on the mantle. Lesser meteors would leave only a superficial scar that would be eroded away. The permanent scars in the mantle act as ‘accidental templates’ consisting of concentric and possibly radial fractures that impose those structures on any rocks that were subsequently laid down or emplaced over the mantle. In southeastern Australia, the proposed Deniliquin Impact structure has been an 'accidental template' providing a 'line-of-least-resistance' for the ascent of the ~2,000 km diameter, offshore, Cape Howe Plume. The western and northwestern radial arms of this plume have created the very geometry of the Lachlan Fold Belt, as well as giving rise to the spatial distribution of the granitic rocks in that belt and ultimately to the gold deposits. The interplay between the templating of the mantle by meteor impacts and the ascent of plumelets, plumes or superplumes from various discontinuities in the mantle is quite possibly the reason that mineral deposits occur where they do.