Spelling suggestions: "subject:"refractory good"" "subject:"refractory god""
1 |
Microbial Pre-treatment of Double Refractory Gold OresAfidenyo, JAMES 23 September 2008 (has links)
The use of microorganisms notably bacteria in mineral processing industry is presently one of the leading emerging pre-treatment techniques being employed for the processing of double refractory gold ores and concentrates. Currently numerous studies are in progress to further improve upon the efficiency of the bacterial process and to investigate the potential of other microorganisms.
In this study, microbial pre-treatment of double refractory gold ore (sample A) and concentrate (sample B) was investigated using a white-rot fungus, Tramestes versicolor (ATTC 20869). Pulp density, temperature, pH and retention times were the process variables considered.
Preliminary studies investigated the amenability of selected pure sulfide sulfur minerals, various types of coal and ore sample A to fungal degradation. Various pre-treatment scenarios were also studied to optimize gold extraction. These were single stage, a two-step and two stage processes involving the well known chemolithotrophic bacteria Acidithiobacillus thiooxidans (ATTC 15494), Acidithiobacillus ferrooxidans (ATTC 19859) and Leptospirillum ferrooxidans (ATTC 53992), the bacterium, Streptomyces setonii (ATTC 39116) and the white-rot fungus, Tramestes versicolor.
Preliminary results for sample A indicated that T. versicolor did not degrade sulfides significantly at its optimum growth conditions (pH range of 4.5 – 5.0) and carbonaceous matter was not degraded but rather passivated as preg-robbing decreased significantly. Lignite was inert to passivation by T. versicolor unlike bituminous coal and to lower extent anthracite. Stimulated alkaline conditions (pH range of 9.5 – 10.5) recorded the overall best sulfur oxidation.
Results of both the single stage and two-step processes confirmed that carbonaceous matter was passivated by T. versicolor; as preg-robbing decreased significantly from 18.1% to ≤ 1.0%. Gold extraction by cyanidation of the pre-treated sample A was 82.5% for the two-step as against 80.5 % for the single stage and 15.0% for the untreated sample. Application of the two-step and single stage process conditions to sample B resulted in 93.3% and 89.9% gold extraction respectively as against untreated concentrate of 30.5%. For the various two stage pre-treatment processes investigated, the abiotic - S. setonii process recorded the best gold extraction of 81.5% for sample A.
S. Setonii degraded carbonaceous matter unlike T. versicolor which passivated it. However, it takes only 3 - 7 days for T. versicolor to effect passivation and eliminate preg-robbing while 14 - 56 days is required for S. setonii to degrade carbonaceous matter significantly.
The result of the novel microbial pre-treatment process indicated that sulfide sulfur was degraded under alkaline conditions and carbonaceous matter passivated by T. versicolor at its optimum growth conditions. This led to a significant improvement in gold extraction from the double refractory gold ore and concentrate investigated. / Thesis (Master, Mining Engineering) -- Queen's University, 2008-09-22 16:42:01.272
|
2 |
Studies On Bio-Oxidation A Refractory Gold Containing Sulphidic Concentrate With Respect To Optimization And ModelingChandraprabha, M N 11 1900 (has links)
Although bacterial leaching of sulphidic minerals is a well-known phenomenon, it is only in the last ten years that full-scale bacterial leaching plants have been commissioned for gold
processing. In order for bacterial leaching to compete successfully with other pretreatment processes for refractory ores, particularly with established technologies such as roasting and pressure leaching, it needs to be efficient. This requires the optimization of the parameters affecting the leaching reaction and the growth of bacteria.
The entire biotreatment process is agitation leaching, carried out in stirred reactors or Pachuca type reactors. The bacterial oxidation is a complex reaction involving gaseous, liquid and solid phases. The interactions are highly complex, and analysis is complicated by the presence of solids in the leaching medium. Inspite of the amount of research that has been performed, kinetic and process models are underdeveloped. Since kinetic data varies widely with the type and source of concentrate, experimental data should be generated before doing the full-scale reactor design. In sizing reactors for a commercial scale process, it would be useful to have a mathematical model that one could use to predict the amount and rate of release of metal, as a function of the various operating parameters of the system.
G.R.Halli arsenical gold sulphide concentrate obtained from Hutti Gold Mines Ltd., Karnataka, was chosen for our study, because of its high refractoriness. An indegenous strain of Thiobacillus ferrooxidans was used for biooxidation. The experiments were conducted in a well-agitated stirred tank reactor under controlled conditions. Sparged air was supplemented with carbon-dioxide for optimized growth. In this work, more than 90% gold and 95% silver could be recovered from the sulphidic gold concentrate when bioleaching was used ahead of cyanidation, compared to 40% and 50% by direct cyanidation.
A generalized model, which accounts for both direct bacterial attack and indirect chemical leaching, has been proposed for the biooxidation of refractory gold concentrates. The bacterial balance, therefore, accounts for its growth both on solid substrate and in solution, and for the attachment to and detachment from the surface. The overall process is considered to consist of several sub-processes, each of which can be described in terms of a mechanism and related rate expressions. These sub-processes were studied seperately under kinetically controlled conditions. The key parameters appearing in the rate equations were evaluated using the experimental data. Since the refractory concentrate contains pyrite and arsenopyrite as the major leachable entities, leaching studies have been done on pure pyrite and arsenopyrite as test minerals and the key parameters in the rate equations are evaluated using this data. The model so developed is tested with the leaching kinetics of the concentrate.
The growth of bacteria is dependent on the availability of the substrate, ferrous iron, and the dependence is modelled by the widely accepted Monod equation. The effect of carbon dioxide supplementation on the bacterial activity was studied and the optimal concentration for growth was found to be l%(v/v). Studies on indirect chemical leaching showed that the rate is sensitive to surface area of concentrate. Indirect rate constant of arsenopyrite was found to be greater than that of pyrite, since pyrite is more nobler than arsenopyrite. Conditions of direct leaching alone was obtained at high pulp density and using substrate adapted bacteria. The rate constant of arsenopyrite was found to be greater than that of pyrite. The parameters obtained were tested with the overall batch leaching data of the concentrate and favourable comparision was obtained.
Thus, it has been possible to isolate the various simultaneous sub-processes occurring during the leaching and propose useful models to describe these processes in some detail. The model has been extended successfully to predict the continuous leaching behaviour using the parameters obtained from the batch data. Studies on the effect of residence time and pulp density on steady state behaviour showed that there is a critical residence time and pulp density below which washout conditions occur. The critical residence time at 10% pulp density was found to be 11 hrs. Operation at pulp densities lower than 5% and residence times lower than 72 hrs is not favourable for efficient leaching. Studies on the effect of initial ferric iron concentration showed that there exists an optimum concentration of ferric iron at which the time required to reach steady state is minimum.
|
3 |
An Investigation of the Role of Sodium Carbonate and Silica in the Neutral/Alkaline Pressure Oxidation of PyritePeters, Samuel 31 August 2012 (has links)
Pressure oxidation of refractory gold ores containing carbonate minerals is conducted
under neutral/alkaline conditions in order to promote fast kinetics, reduced reagent consumption and suppressing the formation of elemental sulphur and CO2 (which reduces the effectiveness of the process). In this work, both the addition of sodium carbonate and the presence of silica were investigated during the pressure oxidation of pyrite in the presence of calcium carbonate. It was found that the shift to an alkaline leaching environment favours the formation of soluble sulphate products over anhydrite (an industrial scale), but that the increase in kinetics is likely due to an increase in pH and carbonate/bicarbonate concentrations. The presence of silica in the autoclave
induces the formation of an in situ iron oxyhydroxide silicate coating and a significant reduction in pyrite oxidation, which was minimized by addition of sodium carbonate.
|
4 |
An Investigation of the Role of Sodium Carbonate and Silica in the Neutral/Alkaline Pressure Oxidation of PyritePeters, Samuel 31 August 2012 (has links)
Pressure oxidation of refractory gold ores containing carbonate minerals is conducted
under neutral/alkaline conditions in order to promote fast kinetics, reduced reagent consumption and suppressing the formation of elemental sulphur and CO2 (which reduces the effectiveness of the process). In this work, both the addition of sodium carbonate and the presence of silica were investigated during the pressure oxidation of pyrite in the presence of calcium carbonate. It was found that the shift to an alkaline leaching environment favours the formation of soluble sulphate products over anhydrite (an industrial scale), but that the increase in kinetics is likely due to an increase in pH and carbonate/bicarbonate concentrations. The presence of silica in the autoclave
induces the formation of an in situ iron oxyhydroxide silicate coating and a significant reduction in pyrite oxidation, which was minimized by addition of sodium carbonate.
|
Page generated in 0.0662 seconds