21 |
SEDIMENT BYPASS SYSTEM FOR IMPOUNDING RESERVOIRS.EFTEKHARZADEH, SHAHRIAR. January 1987 (has links)
This study proposes the use of a pipe line system to transport the inflow sediment to a reservoir through the dam, and discharge it downstream. The system is powered by the available head at the dam. It aims at restoring the original sediment transport regime of the river (i.e. before the dam was built). The idea is fundamentally sound because of the much more efficient sediment transport characteristics of pipes compared to that of open channels. The necessary theory for the hydraulic design of such a system was simply not available and is developed in this study. The work of numerous previous investigators is summarized in the final results and in the developed equation which allows for the calculation of the capacity transport concentration of sediments in pipes. This equation, coupled with the most accepted head loss equation, and the continuity principle, allows for the hydraulic design of systems transporting grannular material. The calculation procedures were fitted into computer programs. In addition to computer programs, design charts where developed which allow for quick application as well as visualization of the developed concepts. It was concluded that the proposed system is fundamentally feasible. Although no economic analysis was conducted, indicators show that it is also economically favorable.
|
22 |
Simulação numérica aplicada ao assoreamento do reservatório Represa Velha / Numerical simulation for sedimentation on the Represa Velha reservoirVenâncio, Stenio de Sousa 15 July 2009 (has links)
Todos os cursos de água carream sedimentos com maior ou menor intensidade, sendo responsáveis pela redução da calha de rios e volume de reservatórios. O assoreamento dos reservatórios reduz sua vida útil, comprometendo os sistemas de geração de energia, de navegação, de irrigação, gerando problemas de ordem ambiental. Neste contexto, subsídios ao processo de gerenciamento dos reservatórios pela predição do assoreamento, tornam-se necessários. O reservatório Represa Velha, situado na bacia hidrográfica do Mogi Guaçu, foi escolhido para estudo de caso pela disponibilidade de dados batimétricos, de vazão e de sedimentos. Com os recursos da dinâmica dos fluidos computacional (DFC), é utilizado o programa MIKE 21C. A solução das equações hidrodinâmicas (Saint-Venant 2D) integradas na vertical, tiveram como condição de contorno a vazão constante em cada período da medição, na entrada do reservatório, e a altura de água constante, para cada dado de vazão, no canal de saída. A calibração do modelo numérico foi feita para os dados temporais de vazão, concentração de sedimentos e batimetrias do reservatório. Com dados da primeira batimetria e campanhas batimétricas sucessivas, foi realizada a comparação entre os resultados obtidos pela simulação numérica e aqueles medidos em campo. As dificuldades e limitações encontradas neste processo são comentadas. / All rivers transport sediments with bigger or smaller intensity, being responsible for the reduction of their channel and volume of reservoirs. The sedimentation of reservoirs reduces their useful life, compromising energy generation systems, navigation, irrigation, and generating problems of environmental order. In this context, subsidies to the process of reservoirs management for the prediction of sedimentation become necessary. The reservoir Represa Velha, located in the Mogi Guaçu\'s watershed, was chosen as a case study because of its available data of bathymetry, flow and sediment discharge. With the resources of computational fluids dynamics (CFD), the program MIKE 21C was used. In the solution of the problem are used the hydrodynamic equations (Saint-Venant 2D) integrated in the vertical. The boundary conditions are the constant flow, in each period of the measurement, at the entrance of the reservoir, and the constant water level, for each flow measured, at the exit channel. The calibration of the numeric model was developed with data from previews work, of flow, sediment concentration and reservoir bathymetry. The numerical data were compared with the measured sedimentation. The difficulties and limitations found in this process are commented on.
|
23 |
Estudo experimental e modelagem numérica do escoamento e do assoreamento em uma armadilha de sedimentosSouza, Leonardo Barra Santana de 06 February 2006 (has links)
Os sedimentos transportados por cursos de água, quando depositados nos reservatórios, podem lhes causar danos, como redução do seu volume de água, prejuízos à navegação, danificação de turbinas e bloqueio de tomadas de água e comportas. Para que medidas preventivas possam ser tomadas nesse sentido, a capacidade de predizer taxas de sedimentação e sua distribuição não-uniforme em reservatórios é muito importante, ainda em sua fase de projeto. Este trabalho compreende a construção e o assoreamento de uma armadilha de sedimentos em laboratório, bem como a utilização de um programa computacional para reprodução numérica do assoreamento. A comparação satisfatória entre resultados experimentais e simulados, tanto para o padrão do escoamento no interior da armadilha quanto para a deposição de sedimentos, permitiu avaliar o programa MIKE 21C como ferramenta útil no estudo e na estimativa do assoreamento de reservatórios / Sediment transport in alluvial rivers may cause serious problems to reservoirs, such as decrease in storage volume, impairment of navigability, damage to hydropower turbines, and blockage of gates and intakes. The capacity of predicting sedimentation and its non-uniform distribution inside reservoirs is very important, still in their phase of planning and design. This work comprehends the construction of a sand trap in a laboratory and its experimental sedimentation, as well as the use of a computational program to reproduce numerically the experiment. The satisfactory comparison between experimental and numerical results, for the flow pattern inside the trap and for the sediment deposition, validated the program MIKE 21C as a useful tool in the study and prediction of reservoir sedimentation
|
24 |
Sediment Yield Analysis of Reservoir #1, Bull Run Watershed, West Cascade Mountains, OregonHamilton, Doann M. 19 September 1994 (has links)
Bull Run Watershed was set aside in late the 1800s as the water supply source for the City of Portland. Other than two dams being constructed, Reservoir #1 (1929) and Reservoir #2 (1962), development of the land had been minimal as public access was restricted. In the early 1960s, land management changed with increased road building and timber removal raising concerns about increased sediment discharge into the reservoirs. The objective of this study is to evaluate how much and how fast the sediment has accumulated in Reservoir #1, and to determine if the rate of sediment accumulation has changed over time. Three methods are utilized: 1) differencing map comparing pre- and postimpoundment sediment conditions, 2) analysis of tree-stumps on reservoir floor, and 3) gravity coring of reservoir sediment. Combining these methods, sediment volume is estimated between 254,000-422,000 cubic meters (332,000-552,000 cubic yards) and the rate of accumulation between 11.5-19.1 tonnes/km2/yr, reflecting a relatively low sediment yield rate. Two anomalous event-layers were identified in gravity cores collected. These are interpreted to be the 1964 flood and the 1972 North Fork Slide. Using these two events, sediment yield rate was divided into different historical segments: 15.33 (1930-1965); 43.62 (1965-1972); and 17.00 tonnes/km2/yr (1972-1993). The increase from 1965-1972 is attributed to either residual affects from the 1964 flood and/or changes in land management activities during this time. The source of the reservoir sediment is primarily from upper tributaries, with 20 percent being attributed to the anomalous events. Smaller amounts of sediment come from the reservoir side walls as lake levels raise and lower. Suspension and turbidity conditions in the reservoir are affected by the dynamics of the drainage system including seasonal fluctuations. Turbidity remains high at the upper reaches of the reservoir before settling out closer to the dam. Some sediment possibly leaves the reservoir over the spill-way or when water is removed for power production.
|
25 |
Reservoir sedimentation in dryland catchments : modelling and managementMamede, George Leite January 2008 (has links)
Semi-arid environments are mainly characterized by scarce water resources and are usually subject to risks of water stress. In these regions, water supply for drinking and irrigation purposes depends strongly on storage in surface reservoirs and sediment deposition in these reservoirs affects adversely the water storage.
In order to reproduce the complex behaviour of sediment deposition in reservoirs located in semi-arid environments and the effects of using sediment management techniques, a reservoir sedimentation model is developed and coupled within the WASA-SED model, which simulates rainfall-runoff processes and sediment transport at the hillslope and river network.
The reservoir sedimentation model consists of two modelling approaches, which may be applied according to reservoir size and data availability. For reservoirs with information about their geometric features (reservoir topography, stage-area and stage-volume curves) and physical properties of sediment deposits, such as deposition thickness, grain size distribution of sediment deposits and sediment densities, a detailed modelling approach of reservoir sedimentation may be applied. For reservoirs without those characteristics, a simplified modelling approach is used.
The detailed modelling approach of reservoir sedimentation enables the assessment of sediment deposition pattern in reservoirs and the evaluation of sediment release efficiency of sediment management techniques. It simulates sediment transport along the longitudinal profile of a reservoir. The reservoir is divided into cross sections to elaborate the sediment budget. The sediment transport component is calculated using a non-uniform sediment transport approach based on the concept of sediment carrying capacity. Four different sediment-transport equations can be selected for the simulations.
The simplified modelling approach of reservoir sedimentation is suitable to simulate water and sediment transfer in dense reservoirs network. Nevertheless, it allows simulating neither sediment management techniques, nor spatial distribution of sedimentation. In this approach, the reservoirs are classified into small and strategic reservoirs according to their location and size. Strategic reservoirs are medium and large-sized reservoirs located on main rivers at the sub-basin’s outlet or reservoirs of particular interest. The small reservoirs are located at tributary streams and represented in the model in an aggregate manner by grouping them into size classes according to their storage capacity. A cascade routing scheme is used to describe the upstream-downstream position of the reservoir classes. The water and sediment balances of small reservoirs are computed for one hypothetical representative reservoir of mean characteristics. Sediment trapping efficiency and effluent grain size distribution are estimated using the overflow rate concept.
Three model applications are carried out within this research, as follows:
• The detailed modelling approach of reservoir sedimentation is applied to the 92.2 Mm³ Barasona Reservoir, located in the foothills of the Central Pyrenees (Aragon, Spain). A two-stage calibration was performed to account for changes on the sediment deposition pattern caused by sediment management. The reservoir sedimentation model is then validated for another simulation period which confirms that the processes related to reservoir sedimentation are well represented by the model.
• An application is carried out to the 933-km² Benguê catchment, located in the semi-arid region of Northeast Brazil. The catchment is characterized by a dense reservoir network, covering almost 45% of the catchment area, with a significant lack of data. Water and sediment balances of those reservoirs are computed using the simplified modelling approach. Three spatial configurations describing the cascade routing scheme are tested.
• The reservoir sedimentation model is applied again to the Barasona reservoir to evaluate the sediment release efficiency of sediment management strategies. Cost analysis is presented to help in the choice of the most promising sediment management technique for that situation. Thus, the model enables the assessment of technical features of the sediment management strategies.
Overall, simulation results are characterized by large uncertainties, partly due to low data availability and also due to uncertainties of the model structure to adequately represent the processes related to reservoir sedimentation. / Semiaride Gebiete sind hauptsächlich durch geringe Wasserressourcen gekennzeichnet und unterliegen häufig dem Risiko der Wasserknappheit. In diesen Gebieten ist die Wasserbereitstellung für Bewässerung und Trinkwasserversorgung stark von der oberflächlichen Speicherung in Stauseen abhängig, deren Wasserverfügbarkeit nachteilig durch Sedimentablagerung beeinflusst wird.
Zur Wiedergabe des komplexen Sedimentablagerungsverhaltens in Stauseen von semiariden Gebieten und die Auswirkungen von Sedimentmanagementmaßnahmen wird ein Sedimentationsmodell entwickelt und mit dem WASA-SED Modell gekoppelt, das für die Modellierung der Abflussbildung und des Sedimenttransportes in Einzugsgebieten geeignet ist.
Das Sedimentationsmodell beinhaltet zwei Ansätze, die unter der Berücksichtigung verschiedener Stauseengrößenklassen und Datenverfügbarkeit eingesetzt werden können. Für die Stauseen mit verfügbaren Informationen über ihre geometrischen Eigenschaften (wie Stauseetopographie und Höhe-Fläche-Volumen-Beziehung) und weitere Kenngrößen wie Ablagerungsmächtigkeit, Korngrößenverteilung und Sedimentdichte, kann ein detaillierter Modellansatz für die Sedimentablagerung verwendet werden. Wo diese Informationen nicht verfügbar sind, wird auf einen vereinfachten Ansatz zurückgegriffen.
Der detaillierte Modellansatz ermöglicht die Betrachtung von Ablagerungsmustern im Stausee und Einschätzungen über die Effektivität von Sedimentmanagementmaßnahmen hinsichtlich der Sedimententlastung. Dieser Ansatz beruht auf der Simulation des Sedimenttransportes entlang eines Stauseelängsprofils. Für die Berechnung des Sedimenttransfers wird der Stauseekörper in einer Folge von Querprofilen repräsentiert. Der Sedimenttransport wird dabei korngrößenspezifisch entsprechend der Transportkapazität berechnet. Dafür stehen vier verschiedenen Sedimenttransportgleichungen zur Verfügung.
Der vereinfachte Modellansatz ist für die Simulation des Sedimenttransfers in Gebieten mit hoher Stauseedichte geeignet, jedoch können weder Sedimentmanagementmaßnahmen noch die räumliche Verteilung der Ablagerungen berücksichtigt werden. Dafür werden die Stauseen in Abhängigkeit von ihrer Größe und Position in kleine und strategische Stauseen unterteilt. Dabei sind strategische Stausseen solche mit mittlerem bis großem Volumen sowie einer Lage im Hauptgerinne oder solche mit sonstiger besonderer Bedeutung. Kleine Stauseen hingegen befinden sich an den Nebenflüssen und werden im Modell in aggregierter Form durch ihre Einteilung in Stauseegrößenklassen repräsentiert. Ein Kaskadenverfahren wird für den Wasser- und Sedimentlauf zwischen den Stauseeklassen verwendet. Dabei werden für jede Stauseeklasse der Wasser- sowie Sedimenthaushalt für einen hypothetischen repräsentativen Stausee mit mittleren Eigenschaften berechnet. Die Sedimentaufnahme und die Korngrößenverteilung des abgegebenen Sediments werden mit dem Überlaufanteil-Ansatz berechnet.
In dieser Studie werden drei Modellanwendungen vorgestellt:
• Für den 92,2 Mio.m³-großen Barasona-Stausee (Vorland der Zentralpyrenäen, Aragon, Spanien) wird die Modellierung der Sedimentablagerung mit dem detaillierten Modellansatz vorgenommen. Die Kalibrierung dafür wurde in zwei Schritten durchgeführt, um Änderungen im Stauseemanagement Rechnung zu tragen. Die ModellValidierung wird schließlich für eine andere Simulationsperiode vorgenommen. Dabei wird ersichtlich, dass die Prozesse der Sedimentablagerung gut durch das Modell wiedergegeben werden.
• Das Modell wird auf das 933 km²-große Benguê-Einzugsgebiet, das sich im semiariden Nordosten Brasiliens befindet, angewendet. Dieses Einzugsgebiet ist durch eine hohe Dichte an kleinen Stauseen, charakterisiert, die fast 45% des Gebietes umfasst, wofür jedoch wenige Messdaten verfügbar sind. Deshalb werden der Wasser- und Sedimenttransport mit dem vereinfachten Modellansatz berechnet. Dabei werden drei Konfigurationen des Kaskadenverfahrens getestet.
• Die Modellanwendung erfolgt erneut für den Barasona-Stausee bezüglich der Effektivität der Sedimentmanagementmaßnahmen. Eine Kostenanalyse ermöglicht die Auswahl geeigneter Maßnahmen für den Stausee. Dadurch wird eine Beurteilung der verschiedenen Sedimentmanagementstrategien ermöglicht.
Im Allgemeinen unterliegen die Simulationsergebnisse großen Unsicherheiten, teilweise wegen der geringen Datenverfügbarkeit, andererseits durch die Unsicherheiten in der Modellstruktur zur korrekten Wiedergabe der Sedimentablagerungsprozesse.
|
26 |
Cost Anaysis Of Sediment Removal Techniques From ReservoirAras, Tuce 01 May 2009 (has links) (PDF)
Siltation in reservoirs is becoming an important problem as the dams are
getting older in the world. The general dam practice has been implemented in
a sequence that / planning, design, construction, operation of dam until the
accumulated sediment prevents its purpose function or functions.
Unfortunately, effects of sedimentation and fate of the left over dams in the
future are not figured. Indeed, these negative effects could be avoided, life of
the reservoir can be prolonged and even the reservoir will last forever by
minimizing the sedimentation.
Therefore in this study, the methods that provide extension of reservoir life are
discussed hydraulically, economically and applicability point of view. In
addition, there is open source package program RESCON which examines
and compares some sediment removal techniques economically and also
hydraulically. RESCON is used in conjunction with several cases / namely
Ç / ubuk Dam-I, Borç / ka Dam and Muratli Dam. Moreover, some sensitivity
analyses are carried out in order to scrutiny of the program for Turkish
economic conditions.
|
27 |
Management Of Reservoir Sedimentation Case Studies From TurkeyCetinkaya, Oguz Kagan 01 February 2006 (has links) (PDF)
Siltation is becoming a big problem as the dams get older all over the world. Conservation and sustainable management of existing reservoirs is gaining more importance than constructing new dams. In this study the program RESCON, which is outcome of a World Bank sponsored project, has been used to examine sediment removal strategies (flushing, hydrosuction sediment removal, dredging and trucking) for four dams of Turkey namely Ç / ubuk I Dam, Bayindir Dam, ivriz Dam and Borç / ka Dam. Sediment measurements are made by governmental agencies in Turkey. In this study characteristics of these measurements will be presented for the future sediment related studies. Then sediment removal strategies which were used in RESCON will be introduced. Evaluation of RESCON results have been made and compared with previous studies for verification except Borç / ka Dam, since it is under construction.
|
28 |
Nutrients and chlorophyll dynamics in Fort Cobb ReservoirLakish, Benjamin. January 2007 (has links)
Thesis (M.S.)--University of Missouri-Columbia, 2007. / The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on March 31, 2008) Includes bibliographical references.
|
29 |
Aplicabilidade dos conceitos de competência do escoamento e de capacidade de transporte às correntes de turbidezBuffon, Patricia January 2018 (has links)
Os conceitos de competência do escoamento e de capacidade de transporte foram desenvolvidos para escoamentos fluviais e acabam sendo transferidos para a modelagem de correntes de turbidez. No entanto, não é claro até que ponto o estabelecimento de analogias entre o ambiente fluvial e as correntes de turbidez pode ser realizado. Nesse contexto, o principal objetivo deste trabalho foi avaliar os conceitos de competência e de capacidade nas correntes de turbidez. O estudo foi desenvolvido experimentalmente, em um canal de inclinação variável de 4 m de comprimento, 40 cm de altura e 12 cm de largura. Um leito móvel foi construído em um trecho intermediário do canal utilizando sedimento - carvão mineral (ρ = 1405 kgm³) - com tamanho areia média. No total, 30 simulações de correntes de turbidez contínuas foram realizadas, utilizando o mesmo sedimento, porém com tamanho areia muito fina. Foram simuladas três declividades diferentes (6%, 0,3% e 0,015%), vazões de injeção entre 15 e 25 lmin, concentrações iniciais variando entre 0,03% e 5,5% e a duração dos ensaios ficou compreendida entre 3 e 30 min. O levantamento do perfil longitudinal do leito móvel, antes e após o ensaio, foi realizado e todo o sedimento foi coletado. Três quantidades distintas de sedimento foram quantificadas: a quantidade depositada antes do leito móvel, a quantidade depositada no leito móvel e a quantidade depositada depois do leito móvel. O cálculo da eficiência de transporte das correntes de turbidez no trecho do leito móvel, bem como das suas descargas sólidas, foi realizado. Também foram realizadas análises granulométricas do sedimento depositado antes e após do leito móvel. Por fim, parâmetros do fluxo foram obtidos (altura e velocidade) através de análises visuais e números adimensionais clássicos do transporte sólido em canais abertos foram avaliados. A partir da interpretação dos dados, conclui-se que os conceitos de competência do escoamento e de capacidade de transporte não foram capazes de refletir o diâmetro característico do sedimento transportado pelas correntes simuladas e a capacidade máxima de transporte desses fluxos, como normalmente ocorre em escoamentos fluviais. A relação entre a eficiência de transporte desses fluxos e a descarga sólida dos mesmos indicou que a partir de uma região a eficiência tornou-se invariante. Essa relação possui curvas com tendência logarítmica e as suas assíntotas ocorreram em valores de eficiência da ordem de 50% (inclinação de 6%) e de 40% (inclinações de 0,3% e 0,015%). A relação entre o diâmetro característico do sedimento depositado depois do leito e antes do leito indicou uma diminuição de cerca de 18% no tamanho dos grãos depositados a jusante. / The modeling of turbidity currents uses the concepts of competence and flow capacity that have been developed based on river hydraulics. However, the analogies between the fluvial environment and turbidity currents are not very clear. The main purpose of this study was to evaluate the competence and flow capacity of turbidity currents. The study was performed using an experimental channel 4 m long, 40 cm high, and 12 cm wide with variable slope. A mobile bed of medium sand-size - mineral coal (ρ=1405 kgm³) - was constructed in an intermediate area of the channel. In total, 30 simulations of continuous turbidity currents were performed and the sediment used in the turbidity currents was very fine sand-size mineral coal. The simulations were accomplished considering three different channel slopes (6%, 0.3% e 0.015%); injection discharge varied between 15 and 25 l/min, and initial volumetric concentrations varied between 0.03% and 5.5%. The simulations lasted between 3 and 30 minutes. The longitudinal profile of the mobile bed was analyzed before and after each simulation, and all the sediment was collected at the end. Three different amounts of sediment were quantified: the amount of sediment deposited before, on, and after the mobile bed. Based on this data, both the transport efficiency and solid discharge of the turbidity current on the mobile bed were determined. Particle-size distribution of the deposited sediment before and after the mobile bed was also carried out. Finally, flow parameters were obtained (high and velocity) considering visual evaluation and the classical dimensional numbers in sediment transport in open channel flows were analyzed. The data interpretation revealed that the competence and flow capacity parameters were not able to reflect the grain diameter transported by the simulated currents and a maximum flow capacity of these flows, as usually is observed in fluvial flows. The relation between the transport efficiency and solid discharge of these flows demonstrated that after a certain point, the efficiency became constant. This relation resulted in log trend curves with asymptotes located at efficiency values of approximately 50% (6% slope) and 40% (0.3% and 0.015% slopes). The characteristic diameter of the sediment deposited after the mobile bed presented a reduction of 18% when compared to the sediment deposited before the mobile bed.
|
30 |
Aplicabilidade dos conceitos de competência do escoamento e de capacidade de transporte às correntes de turbidezBuffon, Patricia January 2018 (has links)
Os conceitos de competência do escoamento e de capacidade de transporte foram desenvolvidos para escoamentos fluviais e acabam sendo transferidos para a modelagem de correntes de turbidez. No entanto, não é claro até que ponto o estabelecimento de analogias entre o ambiente fluvial e as correntes de turbidez pode ser realizado. Nesse contexto, o principal objetivo deste trabalho foi avaliar os conceitos de competência e de capacidade nas correntes de turbidez. O estudo foi desenvolvido experimentalmente, em um canal de inclinação variável de 4 m de comprimento, 40 cm de altura e 12 cm de largura. Um leito móvel foi construído em um trecho intermediário do canal utilizando sedimento - carvão mineral (ρ = 1405 kgm³) - com tamanho areia média. No total, 30 simulações de correntes de turbidez contínuas foram realizadas, utilizando o mesmo sedimento, porém com tamanho areia muito fina. Foram simuladas três declividades diferentes (6%, 0,3% e 0,015%), vazões de injeção entre 15 e 25 lmin, concentrações iniciais variando entre 0,03% e 5,5% e a duração dos ensaios ficou compreendida entre 3 e 30 min. O levantamento do perfil longitudinal do leito móvel, antes e após o ensaio, foi realizado e todo o sedimento foi coletado. Três quantidades distintas de sedimento foram quantificadas: a quantidade depositada antes do leito móvel, a quantidade depositada no leito móvel e a quantidade depositada depois do leito móvel. O cálculo da eficiência de transporte das correntes de turbidez no trecho do leito móvel, bem como das suas descargas sólidas, foi realizado. Também foram realizadas análises granulométricas do sedimento depositado antes e após do leito móvel. Por fim, parâmetros do fluxo foram obtidos (altura e velocidade) através de análises visuais e números adimensionais clássicos do transporte sólido em canais abertos foram avaliados. A partir da interpretação dos dados, conclui-se que os conceitos de competência do escoamento e de capacidade de transporte não foram capazes de refletir o diâmetro característico do sedimento transportado pelas correntes simuladas e a capacidade máxima de transporte desses fluxos, como normalmente ocorre em escoamentos fluviais. A relação entre a eficiência de transporte desses fluxos e a descarga sólida dos mesmos indicou que a partir de uma região a eficiência tornou-se invariante. Essa relação possui curvas com tendência logarítmica e as suas assíntotas ocorreram em valores de eficiência da ordem de 50% (inclinação de 6%) e de 40% (inclinações de 0,3% e 0,015%). A relação entre o diâmetro característico do sedimento depositado depois do leito e antes do leito indicou uma diminuição de cerca de 18% no tamanho dos grãos depositados a jusante. / The modeling of turbidity currents uses the concepts of competence and flow capacity that have been developed based on river hydraulics. However, the analogies between the fluvial environment and turbidity currents are not very clear. The main purpose of this study was to evaluate the competence and flow capacity of turbidity currents. The study was performed using an experimental channel 4 m long, 40 cm high, and 12 cm wide with variable slope. A mobile bed of medium sand-size - mineral coal (ρ=1405 kgm³) - was constructed in an intermediate area of the channel. In total, 30 simulations of continuous turbidity currents were performed and the sediment used in the turbidity currents was very fine sand-size mineral coal. The simulations were accomplished considering three different channel slopes (6%, 0.3% e 0.015%); injection discharge varied between 15 and 25 l/min, and initial volumetric concentrations varied between 0.03% and 5.5%. The simulations lasted between 3 and 30 minutes. The longitudinal profile of the mobile bed was analyzed before and after each simulation, and all the sediment was collected at the end. Three different amounts of sediment were quantified: the amount of sediment deposited before, on, and after the mobile bed. Based on this data, both the transport efficiency and solid discharge of the turbidity current on the mobile bed were determined. Particle-size distribution of the deposited sediment before and after the mobile bed was also carried out. Finally, flow parameters were obtained (high and velocity) considering visual evaluation and the classical dimensional numbers in sediment transport in open channel flows were analyzed. The data interpretation revealed that the competence and flow capacity parameters were not able to reflect the grain diameter transported by the simulated currents and a maximum flow capacity of these flows, as usually is observed in fluvial flows. The relation between the transport efficiency and solid discharge of these flows demonstrated that after a certain point, the efficiency became constant. This relation resulted in log trend curves with asymptotes located at efficiency values of approximately 50% (6% slope) and 40% (0.3% and 0.015% slopes). The characteristic diameter of the sediment deposited after the mobile bed presented a reduction of 18% when compared to the sediment deposited before the mobile bed.
|
Page generated in 0.1471 seconds