This diploma thesis deals with project energy efficient mountain chalet. The building is located in the Krkonoše national park, near by highest Czech mountain named Sněžka. Object is located on plot number 899 in the cadastral Pec pod Sněžkou, on the site of the initial ,,Giant” chalet. The aim of this thesis is proposal of energy efficient mountain chalet in extreme climate conditions, such as in the mountain area, at the elevation 1378 m. Proposal of the chalet emphasis is on achieving maximum energy self-sufficiency. The building consists of two objects SO 01 and SO 02 interconnected by the roof. The total built-up area is 191.39 square meters. The accommodation capacity is 20 people.

The objective of the present thesis is to design a sports center and provide the relevant design documentation for it. The designed building is situated on a flat plot in Hradec Králové which is intended as a building plot or a sports/relax area. The designed sports center is a two-level building without cellar with a flat roof. The building foundations are designed as foundation strips, mainly from plain concrete. The external, loadbearing, and partition walls are designed with clay blocks POROTHERM. The floor structure is designed with prestressed concrete floor slabs SPIROLL. The thermal insulation is resolved with ventilated facade with facade panels. CEMBRIT SOLID. The building is divided into three individual functional units with one shared entrance. It consists of two sports halls with facilities designed for sportsmen and staff, and a gym together with the facilities for costumers. A restaurant and a kitchen are situated in the second floor.

The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.

The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.

This thesis describes the design of a project Family Winery VILARO in Velké Bílovice. It consists of two objects. The first is a guesthouse with a restaurant and the second is a production building with a tasting room. The guesthouse is submitted in the stage of building design. Production facility, a winery, is discussed further as the implementation project. The winery is located in a slightly sloped terrain. It has one partially cellared ground floor. The roof is atypical, one part is sloped triple-coated shed roof, second part is flat with stabilizing layer. The support systém mainly consists of brick blocks, ferroconcrete walls, ferroconcrete boards, ferroconcrete beam ceiling and prestressed concrete ceiling panels Spiroll. The project assumes using of typical building materials.

The subject of my diploma thesis is the design documentation for the pension which is designed for the elderly and will be supplemented with a specialty from the air-conditioning branch. The building is situated in the western part of the town Bystřice nad Pernštejnem and it's located at 3058/3 about the total area of 8315,2m. The total footprint of the suggested building is 1161,2 m. The subject has got an irregularly-shaped floor plan. It is made of three subsequent triangels, it has got three above-ground floors with partial basement. The roof of the building is suggested as a warm flat roof with coating insulation. The structural system of a building is designed as longitudinal with shear walls. The exterior building masonry is suggested from sharpened clay blocks Heluz STI 40 with thickness 400 mm. The contact thermal insulation system ETICS with an insulant from EPS with thickness 100 mm is designed for all building. The building for the elderly is from its bigger part meant for citizens who are older than 65 years in the flats for one or two persons in 2FLR and 3FLR. The space for essential services to the residents is located on the 1st FLR. There are also a cafe and a surgery located in a smaller part of the 1st FLR, which are to be used both by the residents and the public.

The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.

The subject of the diploma thesis is the processing of project documentation for the construction of wellness pension. This building is designed in a medium sloping terrain on the edge part of the Rajhrad city. The building has 3 floors and garage in the basement. Object is divided into 2 parts, the first part consists a restaurant and 2 floors for temporary accommodation in 14 rooms for 45 customers. The second part consists wellness for accommodated and also for other outside customers. The roof is designed single skin with vegetation area (extensive). The project includes a solution of paved areas and access to the underground garage, fencing, water connection, sewage connection, rainwater conection including a retention tank and overflow into the rainwater sewerage. The construction system of the building is based on reinforced concrete footings connected to foundation strips in the places of the cladding, follow up reinforced concrete columns. The ceiling structures, including hidden girders and stairs, are made of monolithic, reinforced concrete. Vertical load-bearing structures are designed from POROTHERM ceramic blocks. The vertical structures of the basement are designed from lost formwork. The building's ventilation system is divided into four parts, the first part is for wellness, the second part is for restaurant and pension, third part is for kitchen, last part is for fire protected escape route.

The diploma thesis "Leisure time centre Brno - Brno reservoir" is processed in the form of architectural study. The theme of architectural study is project which integrates rowing club facilities, housing for students representing University of Technology in Brno, restaurant and observation tower. The main aim of proposal is to create dignified, interconnected spaces for these functions and to make the Brno reservoir even more attractive. Area for project of the Leisure time centre is located on a gentle slope and defined by the Rakovecka road and water area of the reservoir. The proposed project replaces all the existing buildings on the defined area of interest.

This study addresses the design of a new cultural center in the Moravian Square – a polyfunctional object with a great concert hall, a small multifunctional hall with operating and technical facilities, parking, customer services for visitors, and areas for employees and musicians. Also, a restaurant & cafe is a part of this proposed project. New space replaces the unsatisfactory conditions of the current residence of Brno Filharmony in Besední dům – too small, unsatisfactory acoustics, and complicated operation. The cultural center, also, serves as a congress center that is currently missing in Brno - a city of trade fairs and exhibitions. The proposition respects the existing character of the park. The capacity of the new proposed design is from three-quarters underground, and therefore makes a way (nebo „space“) for greenery and pedestrians. The designed object consists of one ground and two underground levels. It has a simple shape with a greenery roof, and is incorporated into the existing spaces of the square. The distinctive element of the design is an open outside atrium in the first underground level. The facase is covered with boards (nebo „panels“) made out of Corian® material in a white shade of Glacier White in contrast to glass windows. The supporting construction is designed from monolithic iron concrete.