1 |
Design of Rotary Tables Using Roller Gear Cam MechanismsTsai, Payee 27 May 2000 (has links)
Rotary tables are generally regarded as the forth axis of machining tools. Traditionally, gear sets are used as reducers in the rotary tables. In order to improve the positioning accuracy, load and efficiency of rotary tables, a rotary table which applies the roller gear cam reducer is proposed. From the deduction of the theory, applications of roller gear cam reducers in the industries can be achieved. This thesis is focused on developing the procedure as follows:
Firstly, the type of roller gear cam reducer and design parameters are identified. Secondly, the mechanical characteristics of the device are analyzed. Finally, a rotary table is designed and implemented to investigate the performance of the of the roller gear cam rotary table.
|
2 |
Design vstřikovacího lisu / Design of machine for injection moldingMultáňová, Katarína January 2010 (has links)
Diploma thesis deals with the development of injection moulding machine design. It is a type of industrial machine, which is designed for production of plastic parts by technology of compression molding. Injection and closing units in the machine are vertical orientated to each other. Injection moulding machine is equipped with rotary table. The main task of diploma work is to design an injection moulding machine with original shape for the future. Conception of the machine is based on present progresive technical solutions. Design of the machine tolerates main ergonomic demands and make the work for operating personnel easier.
|
3 |
Konstrukční návrh otočného stolu s nosností 65 000 kilogramů / Design of rotary table with maximal load capacity 65 000 kgBezděk, Petr January 2021 (has links)
The diploma thesis deals with the design of a rotary table for machining large non-rotary workpieces up to a maximum weight of 65 000 kg. The aim of the work is to analyze and evaluate the current state of knowledge in the field of rotary tables, to create a table design according to the assignment and its 3D model with part of the drawing documentation. The theoretical part of the work searches for solutions used in the construction of rotary tables in the category of table according to the assignment. The information obtained is further used in the design of rotary table solution variants. By evaluating the weight of the required properties and their degree of fulfillment, a variant of the design solution of the table is selected, which is then designed. The individual design steps are described and explained in the text part of the work accompanied by pictures and calculations. The result of the process is a structural design of the mechanical part of the rotary table with a 3D model and partially processed drawing documentation. The contribution of the work is the summarization of relevant information for the design of rotary tables, the processed procedure of solving the design of the table and the modeled design of the rotary table. These outputs can be further treated as documentation for the production of the designed table, the development of the rotary table design to deeper details or technical development in this area.
|
4 |
Návrh robotického pracoviště pro lepení magnetů na DC motory / Design of a Robotic Cell for Gluing of Magnets of DC MotorsKűhnel, Martin January 2011 (has links)
The diploma thesis deals with the design of a general concept workplace for gluing magnets to the DC stators. The thesis is focused on the selection of industrial robots and their location, the design and the construction of end effectors for manipulation with segments and stators and the proposal of solution for engineering units on a workplace. Among the construction units belong: revolving tables with gripping systems, rotary tables on pallets and construction manipulators. At the end of the thesis the concept of the solution for workplace safety is created according to current legislation and safety standards.
|
5 |
Multifunkční obráběcí centrum pro rotační i nerotační obrobky / Multifunctional machining centers for machining rotating and prismatic partsKunorza, Michal January 2014 (has links)
Objective of the diploma thesis is design of multifunctional machining centre, where is machining rotating and prismatic parts enabled. Because it is large theme, thesis is solved by group. My task was to design parts of mottion axes. Diploma thesis contains complex design of machine tool from discovering optimal kinematics for required applictaion, analysis of influences acting to machine, modular concept and design solution.
|
6 |
3D-Bodycanning: A market research based approach for rotary table selectionSchack, Tobias, Böös, Ludvig January 2017 (has links)
This report provides a recommendation for the purchase of a rotary table intendedmainly for 3D body scanning. This recommendation is presented to FabLab,Halmstad University. The proposal is based on the needs and requirements discussed and defined among group members, clients and other stakeholders. The main requirement is that the product can be programmed and controlled by acomputer. This requirement was strengthened through the execution of a pairwise comparison. A broad market research is described and methods that have been used to achieve the results. In order to better understand how much the load will affect the product, a force measurement test was performed and analyzed. Earlier reports about reverse engineering, different applications and scanning techniques provide a deeper understanding of factors that may affect the selection of the product.
|
7 |
Dvousouřadnicový NC stůl pro frézovací centra s hydraulickým upínačem / The two-coordinate numerical controlled table for milling center with hydraulic clampNešpor, Vít January 2013 (has links)
This thesis deals with theoretical design of NC rotary tilting table for Kovosvit MAS milling machine MCV 754 - QUICK. In the beginning of this paper is made a research with focus to rotary tilting tables, paletizing technologies and rotary suppliers of energy. The main part concerns with loading analysis of rotary tilting table, proposal of motion drives, bearings and the frame of desired machine. For motion drive of each axis is chosen torque motor. Constructional solution of pressed air supply to the middle boring of face plate is realized by a rotary union. The next point of solution is arrangement of moving supply electrical and pneumatic energy to the frame of tilting axis. The last part is concerned to proposal of realizing of changing tchnological pallets by the Zero-point systems. In the end the economical analysis is made.
|
8 |
Návrh robotického pracoviště pro obsluhu vstřikovacích lisů s následnou montáží a kontrolou / Design of a robotic workplace for the operation of injection molding machines with subsequent assembly and inspectionMusil, Marek January 2018 (has links)
The thesis deals with the design of a robotic workplace for the operation of injection moulding machines. It is concerned with the design of the workplace component deployment and the evaluation of the best variant using a multi-criteria assessment. In detail, attention is paid to the end effectors of industrial robots and the assembly workplace, where finishing operations take place. Finally, the risk analysis and technical and economic evaluation of the proposed workplace are carried out.
|
9 |
NC otočný stůl s lineární osou / NC rotary table with linear axisAxmann, Patrik January 2020 (has links)
This diploma thesis deals with the construction of an NC rotary table with a linear axis. The first part is devoted to the analysis of the current state of science and technology in the problem, the use of various drives, mechanisms for torque transmission, linear feed lines, measuring and an overview of tables from various manufacturers. Furthermore, the work is devoted to the creation of 4 variants of construction, then the selection of the best variant and technical calculations. At the end, the work deals with a detailed description of the machine.
|
10 |
Konstrukce multifunkčního obráběcího centra / Design of multi-functional machining centreNeumann, Ondřej January 2013 (has links)
Design of multi-functional machining center The purpose of this diploma thesis is a design of turning table for multi-functional machining center. The first part is the background research of multi-functional machining centers, rotary tables, chip management and brief overview of chosen machining center’s manufacturers. The sphere of using of the designed machine, including parameters of turning table, and its basic parameters are determined on the basis of this research. Afterwards, the variants of turning table drives are drawn up and one variant of calculation and construction is made. Design of clamping desk and chip management of the machine is also made. Above a specified framework of this thesis, simplified machine foundation design and anchoring of machine parts to this basis is performed. The work also includes a 3D model of turning table and substructure. The complete set of constructed machining center was brought into immersion virtual reality environment.
|
Page generated in 0.3512 seconds