<p>The formation of surface films on electrodes in contact with non-aqueous electrolytes in lithium-ion batteries has a vital impact on battery performance. A basic understanding of such films is essential to the development of next-generation power sources. The surface chemistry, morphology and thermal stability of two typical anode and cathode materials, graphite and LiNi_0.8Co_0.2O₂, have here been evaluated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction, scanning electron microscopy and differential scanning calorimetry, and placed in relation to the electrochemical performance of the electrodes. </p><p>Chemical and morphological information on electrochemically formed graphite surface films has been obtained accurately by combining XPS measurements with Ar⁺ ion etching. An improved picture of the spatial organisation, including thickness determination of the surface film and characterisation of individual component species, has been established by a novel sputtering calibration procedure. The stability of the surface films has been shown to depend strongly on temperature and choice of lithium salt. Decomposition products from elevated-temperature storage in different electrolyte systems were identified and coupled to effects such as capacity loss and increase in electrode resistance. Different decomposition mechanisms are proposed for surface films formed in electrolytes containing LiBF₄, LiPF₆, LiN(SO₂CF₃)₂ and LiCF₃SO₃ salts.</p><p>Surface film formation due to electrolyte decomposition has been confirmed on LiNi_0.8Co_0.2O₂ positive electrodes. An overall surface-layer increase with temperature has been identified and provides an explanation for the impedance increase the material experiences on elevated-temperature storage. </p><p>Surface phenomena are clearly major factors to consider in selecting materials for practical Li-ion batteries.</p>

The formation of surface films on electrodes in contact with non-aqueous electrolytes in lithium-ion batteries has a vital impact on battery performance. A basic understanding of such films is essential to the development of next-generation power sources. The surface chemistry, morphology and thermal stability of two typical anode and cathode materials, graphite and LiNi0.8Co0.2O2, have here been evaluated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction, scanning electron microscopy and differential scanning calorimetry, and placed in relation to the electrochemical performance of the electrodes. Chemical and morphological information on electrochemically formed graphite surface films has been obtained accurately by combining XPS measurements with Ar+ ion etching. An improved picture of the spatial organisation, including thickness determination of the surface film and characterisation of individual component species, has been established by a novel sputtering calibration procedure. The stability of the surface films has been shown to depend strongly on temperature and choice of lithium salt. Decomposition products from elevated-temperature storage in different electrolyte systems were identified and coupled to effects such as capacity loss and increase in electrode resistance. Different decomposition mechanisms are proposed for surface films formed in electrolytes containing LiBF4, LiPF6, LiN(SO2CF3)2 and LiCF3SO3 salts. Surface film formation due to electrolyte decomposition has been confirmed on LiNi0.8Co0.2O2 positive electrodes. An overall surface-layer increase with temperature has been identified and provides an explanation for the impedance increase the material experiences on elevated-temperature storage. Surface phenomena are clearly major factors to consider in selecting materials for practical Li-ion batteries.

On the bead modeling methodology, or BMM, a macromolecule is modeled as a rigid, non-overlapping bead array with arbitrary radii. The BMM approach was pioneered by Kirkwood and coworkers (Kirkwood, J.G., Macromolecules, E.P. Auer (Ed.), Gordon and Breach, New York, 1967; Kirkwood, J.G., Riseman, J., J. Chem. Phys., 1948, 16, 565) and applied to such transport properties as diffusion, sedimentation, and viscosity. With the availability of computers, a number of investigators extended the work to account for the detailed shape of biomolecules in the 1970s. A principle objective of my research has been to apply the BMM approach to more complex transport phenomena such as transport in a gel, electrophoresis (free solution and in a gel), and also transport in more complex media (such as the viscosity of alkanes and benzene). Variables considered by the BMM include the number of beads (N), the radii of the beads, net charge and charge distribution, conformations, salt type, and salt concentration. The BMM has been extended to: (1) account for the existence of a gel; (2) characterize the charge and secondary structure of macromolecules; (3) account more accurately for hydrodynamic interaction (remove the orientationnal preaveraging approximation of hydrodynamic interaction); (4) study the effect of ion relaxation for particles in arbitrary size, shape, and charge; (5) consider the salt dependence of electrokinetic properties; (6) account for the formation of possible complex between guest ions and BGE ions. We also did diffusion constant measurement by NMR for amino acids and short peptides in 10%D2O-90% H2O at room temperature and applied to our modeling study by BMM.